| |

EXAIR: New ATEX Cabinet Cooler Systems for Explosive Environments

May 14, 2024

EXAIR’s new 316 Stainless Steel ATEX Cabinet Cooler Systems are the latest solution for protecting sensitive electronics in ATEX classified areas.

This low cost and reliable product is UL tested, CE compliant, and meets the stringent requirements for use upon classified purged and pressurized electrical enclosures within Zones 2 and 22. With cooling capacities up to 5,600 Btu/Hr., it’s an ideal answer for protecting electrical enclosures with problematic overheating in areas with explosive atmospheres, both indoors and outdoors.

EXAIR ATEX Cabinet Coolers produce and circulate cold air inside enclosures to prevent overheating, high temperature faults and costly shutdowns. They easily mount via a standard electrical knockout while maintaining the NEMA 4/4X integrity of enclosures in explosible areas. These systems include an auto-drain filter separator to ensure no water, dirt, or contaminants from the compressed air system pass into the electrical enclosure. Thermostat controls are available to minimize compressed air use, and cold air distribution kits ensure balanced cold air flow to all areas of the enclosure.

In addition to ATEX, EXAIR carries an extensive line of Cabinet Coolers ranging from NEMA 12, 4, 4X and Hazardous Locations. All EXAIR Cabinet Cooler Systems are CE compliant and UL listed, and are built to last with no moving parts to wear out. Applications include cooling control panels, motor control centers, CCTV cameras, laser housings and much more. Prices start at $2,418.  

Important_Links_Bar.jpg

More Information

Post Views: 454

Related Articles

X2X+
| |

B&R Automation: X2X+ Backplane Bus – Four Times More Performance

B&R now offers the X2X+ backplane bus as an option, increasing the performance of the X20 system by a factor of four. And because all existing X20 I/O modules are already compatible with X2X+, all it takes to build more powerful machines are bus modules. The advantages of this new bus are particularly apparent in applications that involve many I/O modules or high data volume but where short cycle times are imperative.

Another Christmas With Wera: Advent Calendar With a Compact and Portable Screw-Driving Workshop
|

Another Christmas With Wera: Advent Calendar With a Compact and Portable Screw-Driving Workshop

After 2020’s eventful and challenging year, many people will use the coming Christmas season to bring joy to others and to express their solidarity and togetherness. The Advent calendar from Wuppertal screwdriver manufacturer Wera has become a classic gift in the run-up to Christmas, and it is being released for the eleventh time this year. Nevertheless, each year’s is unique, as it is always equipped with a different variety of quality tools.

 

 

 

PBUS-26-Schurter-DKIV1Phase-400.jpg
| |

Schurter: High Current Choke DKIV-1 Phase in Vertical Design

SCHURTER expands its range of current-compensated chokes for printed circuit board mounting, to include a vertical design for 1-phase high current applications. The new DKIV-1 sports a compact design and smaller footprint due to its vertical orientation. The series is available with a ferrite or nanocrystalline core for a wide range of rated currents from 10 A to 50 A.

 

 

 

icotek: UT Cable Grommet, The New Slotted U-Shaped Cable Grommet for Frameless Installation up to IP54
| |

icotek: UT Cable Grommet, The New Slotted U-Shaped Cable Grommet for Frameless Installation up to IP54

The UT cable grommet is an U-shaped cable bushing and makes it possible to route single pre-connectorized cables as well as standard cables with a diameter range of 4 to 11 mm into enclosures. The wall thickness of the enclosure can be from 1 to 4 mm. The UT is a split grommet that can be mounted around the cable. The UT grommet is ideal for installation on the lower part of the enclosure.

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders