Panel Builder US

Find articles by Brand and Industry:

1
Brand: Grace
Industry Focus: Industrial
Product Type: Enclosures

PBUS-26-Grace-GracePortHMICoverKits-400.jpg

Recently, Grace Technologies was pleased to announce new sizes to their line of GracePort+ HMI cover kits. The new 20" housings will accommodate even more Human Machine Interfaces (HMIs) than before, with the added benefit of including their custom line of GracePort components and Permanent Electrical Safety Devices (PESDs) conveniently installed within the large, protected housing.

 

 

 

Industry Focus: General Manufacturing, Industrial
Product Type: Enclosures

PBUS-25-Bud-IP66AIOWithWindow-400.jpg

The IP66 AIO All In One hinged enclosure with a clear window is a sturdy enclosure with dual doors including a preinstalled large clear door and plastic mounting panel. The body is made of gray ABS and features a clear large front window door. The IP66 AIO windowed enclosure has a UL-94 HB rating, and is suitable for indoor use. There is a continuous gasket on both the clear and main doors, and is tested for IP66 protection.

 

 

 

1
Industry Focus: General Manufacturing, Industrial

New counterbalance support hinges from Southco reduces overall cost of lifting and positioning heavy panels and lids.

1
Industry Focus: General Manufacturing, Industrial
Product Type: Enclosures

PBUS-25-Integra-StainlessSteelEnclosures-400.jpg

Stainless steel enclosures improve workplace safety by protecting sensitive electronics and other components. Today, when electronic systems play a crucial role in industrial settings, stainless steel enclosures are a durable and effective long-term solution for eliminating hazards and ensuring that all processes run smoothly. The extreme conditions found in many industrial settings call for special protective measures.

 

 

 

1
Brand: Pepperl+Fuchs
Industry Focus: Oil & Gas, Pharmaceutical
Product Type: Enclosures

PBUS-26-Pepperl-SRSeriesEnclosures-400.jpg

Pepperl+Fuchs has now reinforced its position as a supplier of Ex-equipment with the introduction of the SR series. The new stainless steel enclosure series joins the GR series, made of glass fiber-reinforced plastic, in the range of the process automation specialist. The new series tops off a portfolio of highly flexible and cost-effective control and distribution solutions in type of protection Ex e (Increased Safety).

 

 

 

1
Industry Focus: Power Distribution & Energy
Product Type: Enclosures

PBUS-25-Stahlin-DeadFrontPanel-400.jpg

Marketplace innovation from Stahlin Enclosures has been highlighted by nearly 60 years of innovation. One of many examples is the availability of their Dead-Front Panels. These panels, used in conjunction with corner mounting posts, mount at the front of the enclosure. They are hinged on one side, secured to the other, and provide a larger working surface area when compared to the variable height swing panel.

 

 

 

1
Industry Focus: General Manufacturing, Industrial, Mining
Product Type: Enclosures

PBUS-25-METCASE-EnclosureCapacity-400.jpg

Metal enclosures manufacturer METCASE has further invested in new technology to meet growing demand for cases and front panels printed with photo-quality legends, logos and graphics. METCASE first introduced digital printing five years ago. Now increased demand has prompted the company to double its capacity. The new equipment is slightly larger than the existing 1800 x 1800 dpi flatbed printer – and 40% faster.

 

 

 

1
Industry Focus: General Manufacturing, Industrial
Product Type: Enclosures

PBUS-25-FIBOX-ULEnclosures-400.jpg

FIBOX provides an extensive range of UL enclosures for harsh and demanding applications. Most of more than 1000 enclosures are available with UL certification. The biggest variation of base sizes (15) under the same design is available with UL EURONORD PC. Dimensions range from 50*52*40 mm to 230*300*110 mm. The largest cabinets are found from UL CAB PC range.

 

 

 

1
Industry Focus: General Manufacturing, Industrial, Marine/Offshore
Product Type: Enclosures

PBUS-25-FIBOX-HMICoverKit-400.jpg

Fibox’s HMI cover kits protect instruments or electronics components that need secure accessibility. The Instrument Protection Window (IPW) permits both viewing and access to readouts and controls which are surface mounted on any metal or non-metallic enclosures. These HMI covers allow for easy viewing of meters or displays and afford direct access to HMI controls on any underlying enclosure.

 

 

 

1
Industry Focus: General Manufacturing, Industrial, Power Distribution & Energy
Product Type: Enclosures

PBUS-25-AlliedM-HMICOverKit-400.jpg

As of mid-October in 2020, Allied Moulded Products, Inc. had expanded its line of premium enclosure accessories with two additional size HMI cover kits AMHMI86 (8″ x 6″) and AMHMI66 (6” x 6”). HMI cover kits are designed to provide protection for instruments or electronics requiring routine attention or detail. The cover kit features a strong and rigid design, mounting securely to the outside (flat surface) of any enclosure, and makes accessibility to electronic components easy.

 

 

 

1

Editor's Pick: Featured Product News


PBUS-25-Rittal-DataCentreCooling-400.jpg

Data Centre and Plant Managers working in small and mid-sized businesses often find themselves searching their buildings for unused space to house the company’s IT and other enclosures.

Mailrooms, empty offices, janitors’ closets…all have been repurposed into data closets holding one to a few racks. This approach may be the right choice in terms of square footage needed, but when it comes to proper climate conditions for sensitive IT equipment, it could not be more wrong. At best, these spaces are cooled using only the building’s AC system. At worst? An open window.

A building’s existing air conditioning system (or combined heat and air conditioning system) is designed to create comfortable environments for employees – the reason they are sometimes referred to as “comfort systems.” When IT racks need to be placed somewhere on site, it’s thought that “any old room” will do because AC ductwork usually terminates in these spaces. However, the reality is that even if you were to add ducts to supplement the building’s AC, relying on a system designed for humans is not a good solution for IT equipment.

Server rooms need more targeted cooling to keep the temperature within a specific range and prevent the servers from overheating. According to ASHRAE (the American Society of Heating, Refrigerating and Air-Conditioning Engineers), the appropriate temperature range for server rooms is between 64.4 and 80.6 Fahrenheit. This requires a discrete cooling solution capable of monitoring and managing the temperature of both the equipment and the room. The same cooling system must also be capable of regulating humidity within the precise margins required by sensitive equipment. Finally, building HVAC will not provide sufficient airflow volume for heat removal from installed appliances; the CFM requirements for comfort cooling are significantly lower than airflow required to remove heat from the IT devices.

Read More


 

Products for Panel Builders

  • Prev
Klein Tools, for professionals since 1857, introduces a new line of electrical test kits, which ...
VisuNet FLX is, as its name suggests, a comprehensive range of highly flexible operator ...
Siemens Smart Infrastructure presents the new Siprotec 5 Compact device, specially designed to ...
RAFI has expanded its RAMO S selector switch series to include integrated M12 plug and play ...
Recently, Grace Technologies was pleased to announce new sizes to their line of GracePort+ HMI ...
Murata has developed a series of miniature DC panel meters developed for industrial and laboratory ...
Enabling wireless access to a machine or system, the new Wireless Access Point (758-919) ...
AutomationDirect has added Schmersal two-hand control panels to its lineup of safety products. ...
Using an L32 B connector allows users to replace two size 16 B interfaces -- saving over 40% of ...
The metal housings in the Han EMV and Han HPR series are now also available in versions that ...

News for Panel Builders

News for Panel Builders
  • Prev
Leviton recently announced a new partnership with the electrical training ALLIANCE (etA). With the ...
The MATLAB Expo takes place for the first time as a digital event from 4 to 5 May. The platform for ...
Allied Electronics & Automation continues to expand its roster of more than 500 ...
EnerSys will deliver two informative, virtual product demonstrations on Tuesday, April 13 and ...
Vineyard Wind, a joint venture between Avangrid Renewables, a subsidiary of AVANGRID, Inc., and ...
Graybar recently announced that Alex Piwoschuk has been named District Vice President for the ...
Empire Automation has recently joined forces with one of the leading global companies in automation ...
Siemens and Allied Electronics & Automation are teaming up to help panel builders better design ...
The Digital Enterprise Virtual Experience will take place parallel to the Hannover Messe ...
If you are looking for a versatile inverter solution for PV, or PV plus Energy Storage, look no ...