| | | |

EdgeEnergy Features EdgeEV70 for Rapid EV Charging Stations in Electrification 2022 Booth #1522

PBUS-39-Edge-EdgeEV70Electrification2022-400.jpg

May 16, 2022

Date: June 28-30, 2022

Location: Charlotte Convention Center, Charlotte, North Carolina

EdgeEnergy will feature the EdgeEV70 single phase power source for Direct Current Fast Chargers in Electrification 2022 Booth #1522. The innovative EdgeEV70 allows for DC fast chargers to be deployed in areas without three-phase power faster and at a lower cost than infrastructure upgrades. And unlike products that are dependent on battery storage it provides on-demand, continuous charging availability 24/7. Ideal for remote areas or those without access to three-phase power, the fully self-contained, plug-n-play EdgeEV70 delivers clean, quiet power to DC fast chargers. It can be delivered in just a few weeks and installed in just a few hours. The EdgeEV70 operates from readily available single-phase utility service to produce clean, stable, isolated, three-phase output for any DC rapid charger. Power output of 480V AC, three-phase, 70 kW is ideally suited for rapid chargers up to 70 kW.  Each power source has an efficiency of 90%, is 100% electrically isolated, with 0 harmonics to comply with IEEE 519 requirements, and has a 1.0 power factor rating at full load. The power source is housed in a weather tight enclosure with an integrated temperature control system. Remote system monitoring, diagnostic, proactive maintenance is standard, allowing the EdgeEV70 to be used in remote areas where three-phase power is not available or cost-prohibitive to install. Rapid EV charging is desired in locations such as state and national parks, recreational areas, tourist locations, and more, to alleviate the range anxiety of EV owners, support local economies, and encourage EV adoption.

Since it does not rely on battery or solar panels, the EdgeEV70 delivers on-demand power to the charger with no waiting time, and no risk of depleting the battery. This continuous power improves the customer experience.

The EdgeEV70 uses patented technology to provide isolated and balanced 3-phase power in ratings to 70 kW. Built with rural applications in mind, the EV70 rides through momentary power loss and can accommodate voltage fluctuation in single-phase lines +/- 10% while delivering solid three-phase power. The EdgeEV70 supports efforts to extend charging networks into areas without 3-phase power at lower cost.

Built-in monitoring and alert systems make remote management of the EdgeEV70 easy. EdgeEnergy allows owners to customize their management dashboard to meet their specific requirements, including custom alerts and remote restart and security features.

EdgeEnergy was created with a vision for a greener and more sustainable power infrastructure. Their products use patented large horsepower single-phase motor technology to deliver isolated and balanced three-phase power in ratings to 70 kW for Level-3 rapid charging stations.

Important_Links_Bar.jpg

More Information

 

Post Views: 610

Related Articles

Wieland Electric: Small – Compact – Powerful
| | | |

Wieland Electric: Small – Compact – Powerful

With the RST Mini from Wieland, lighting concepts can be implemented quickly and safely under critical installation conditions. Sophisticated lighting systems with a puristic minimalist design provide extremely limited space for the required electrical installation. In addition, such lighting concepts are increasingly being used not only in buildings, but also for outdoor installations.

 

 

 

Weidmuller: Custom PLC Interface Module Program for Industry 4.0 Applications
| | | | | | |

Weidmuller: Custom PLC Interface Module Program for Industry 4.0 Applications

Weidmuller USA has recently launched its Custom PLC Interface Modules program to improve device and field connectivity in a wide variety of Industry 4.0 applications. Designed to meet the specific application needs of a business, these new interface modules can be installed in control cabinets serving all industry sectors. In addition, Weidmuller offers complete engineering, prototype and production services for fully customized PLC modules. In addition to the Customer PLC Interface Module program, Weidmuller USA’s Engineering and Assembly Services located in Richmond, Va. also offers manual and automated DIN rail assembly, modified and assembled enclosures and custom automation and PV combiner box solutions.

CUI Devices: New PTN16 Series Rotary Potentiometer Series Offers Single or Dual Gang Options
| |

CUI Devices: New PTN16 Series Rotary Potentiometer Series Offers Single or Dual Gang Options

CUI Devices’ Motion & Control Group recently announced the introduction of a new rotary potentiometer series offering single or dual gang models as well as dual gang options with an on-off switch. The PTN16 series is housed in a 16.5 mm package with shaft lengths of 15, 20, 25, or 30 mm and D-cut or knurled shaft styles. Ideal for control inputs for electronic circuits and audio control applications, the PTN16 models feature resistance ratings from 1 to 2000 kΩ, a rotational life of 10,000 cycles, and a variety of terminal configurations.

MC-3-Emerson-ASCOSeriesSolenoidValves-400.jpg
| | |

Emerson’s Solenoid Valves Enable More Compact Machine Designs

Emerson has launched a range of two-way and three-way solenoid valves that support original equipment manufacturers’ (OEMs) need to develop more compact machines and equipment without compromising on fluid control performance. The optimized body design and internal flow path of the new ASCO Series 256/356 not only provides a smaller footprint, but also reduced power consumption and increased pressure ratings critical in industrial and commercial applications.

 

 

 

Siemens and Merck Drive Forward Modular Production in Industry

Siemens and Merck Drive Forward Modular Production in Industry

Siemens and science and technology company Merck will work together in future at Merck’s headquarters in Darmstadt to develop a technical backbone for the modular production of the future. The aim is to create a production line that flexibly combines various individual process modules and to use Modular Type Packaging (MTP) and Process Orchestration Layer (POL) technology to drastically reduce engineering effort.

 

 

 

WAGO: 2-Pole PCB Terminal Block With Push-In CAGE CLAMP
| |

WAGO: 2-Pole PCB Terminal Block With Push-In CAGE CLAMP

Introducing the 2-pole variant PCB terminal blocks with Push-in CAGE CLAMP connection and levers, from WAGO. These terminal blocks allow for push-in termination of solid and ferruled conductors, allowing for intuitive and tool-free operation. Several clamping units can be held open simultaneously, simplifying the connection of multi-core cables, and testing can be performed both parallel and perpendicular to conductor entry.

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • SCHURTER: Green Line – Portfolio Expanded

    SCHURTER: Green Line – Portfolio Expanded

    SCHURTER significantly expands its portfolio of “Green Line” connectors. Because wherever you can reduce your CO₂ footprint without compromising on quality, you really should do so. As with the launch of the first series of Green Line products, SCHURTER remains true to its policy of offering a version with plant-based housings for products that are… Read More…

  • AutomationDirect: Teknokol Eco Series HMI Enclosures and Suspension Arm Systems

    AutomationDirect: Teknokol Eco Series HMI Enclosures and Suspension Arm Systems

    AutomationDirect has added Teknokol Eco series HMI enclosures and suspension arm systems which are designed to work together to provide customized, adjustable HMI panels using a selection of components and cut-to-length arm profiles. These suspension systems allow the HMI to be relocated as needed for better HMI visibility and operator comfort.  The medium-duty TK060 series… Read More…