| |

Cliff Electronics: IP65-rated Cat5e RJ45 Feedthrough Connector and Plug Carrier

January 28, 2022

Cliff Electronics has added a new Cat5e RJ45 Feedthrough Connector to its FT range, which all fit into an industry standard XLR connector 24mm diameter panel cut out. In addition, a compatible, secure, snap-in lockable XLR style Plug Carrier is available to facilitate the connection of an RJ45 plug (not supplied) or cable assembly.

The new Cliff RJ45 FT Jack is a rugged nickel-plated diecast zinc metal construction offering protection to IP65, providing a dust tight and water-resistant connector for rugged applications and is supplied with an integrated dust cover for continued protection when not in use. Rated at Cat5e the socket is suitable for both Fast Ethernet (10/100) and Gigabit Ethernet (10/100/1000) data communications.

Widely used in IT systems, consumer and audio/broadcast products, Cliff’s female RJ45 Feed Through Ethernet sockets meet the wiring standard for using an 8P8C connector as defined in Part 68 of the FCC rules and are generally mounted directly on a device or on an I/O patch panel. The all-metal design reduces the effects of EMI.

  • Dielectric strength: 1KV DC
  • Frequency range: from 1 to 100MHz
  • Contacts: rated at 1.5A / 50V
  • Lifetime: greater than 1000 mating cycles
  • Operating temperature: from -30°C to +80°C

 

More Information

Check Availability

 

Post Views: 438

Related Articles

NovaTech: Modular Distributed Event Recorders
| |

NovaTech: Modular Distributed Event Recorders

The Bitronics M871 (Single Line, Dual Bus) and M872 (Dual Line, Dual Bus) IEDs provide a complete solution for monitoring and recording in substation applications. They provide a scalable, low-cost distributed disturbance recording solution that meets all three PRC-002 requirements in a single unit and supports peer-to-peer GOOSE messaging for cross-triggering without hard-wired contacts.

 

 

 

PBUS-43-Littelfuse-EnergyStorageRackFuses-400.jpg
| | |

Littelfuse: Energy Storage Rack (ESR) Battery Protection Fuses

Littelfuse, Inc. has launched its Energy Storage Rack (ESR) series of fuses designed specifically to protect battery racks from a range of fault currents to help prevent equipment damage and expensive system failures. The 1500V direct current (DC) high-speed square body fuse is extremely fast-acting to respond quickly, safeguarding the battery module or other devices in energy storage, power conversion, and DC common bus systems as well as hybrid photovoltaic battery energy storage system (PV-BESS) inverters.

 

 

 

TE Connectivity: New Product – SPEC 55 Low Fluoride Wire and Cable

TE Connectivity: New Product – SPEC 55 Low Fluoride Wire and Cable

TE Connectivity launched the SPEC 55 low fluoride (55 LF) wire and cable insulation system for space and high altitude environments. Made from rugged fluoropolymer, TE’s SPEC 55 LF insulation system has an outgassing rating of less than 10 PPM, which helps reduce the potential for corrosion of other components due to trapped gases escaping in a vacuum or low-pressure environment.

 

 

 

Stewart Connector Announces Custom Fiber Flex Assembly Design and Manufacturing
| |

Stewart Connector Announces Custom Fiber Flex Assembly Design and Manufacturing

Stewart Connector recently announced that it has Fiber Flex cable assembly capabilities, in their Glen Rock, PA facility. This capability supports the company’s growth in commercial applications where complex routing, minimal space, critical airflow is required. Fiber Flex assemblies provide a superior solution compared to individual cabling for fiber routing and management of PCB card level and back-plane applications.

 

 

 

interpack 2020: Safety Fieldbox Enables New and Flexible Safety Solutions for the Packaging Industry

interpack 2020: Safety Fieldbox Enables New and Flexible Safety Solutions for the Packaging Industry

The Schmersal Group will be showcasing its Safety Fieldbox with PROFINET/PROFIsafe field bus interface at interpack 2020, the new safety solution designed specifically for the packaging industry. With its sometimes complex processing and production systems, the packaging industry has high demands when it comes to safety technology, which must help to facilitate system flexibility, efficiency, availability and connectivity.

 

 

 

PBUS-42-Pepperl-KHSystem-400.jpg
| |

Pepperl+Fuchs: Standardized Digital Access to Product Information for K-System and H-System

Installation and maintenance procedures in process plants should be carried out precisely and safely, but at the same time as quickly as possible. Manual searches often prove to be a costly and time-consuming obstacle, for example when the required product documentation is not immediately available or information from different manufacturers is available in different formats.

 

 

 

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders