| |

Stewart Connector Announces Custom Fiber Flex Assembly Design and Manufacturing

December 9, 2020

Stewart Connector recently announced that it has Fiber Flex cable assembly capabilities, in their Glen Rock, PA facility. This capability supports the company’s growth in commercial applications where complex routing, minimal space, critical airflow is required.

Fiber Flex assemblies provide a superior solution compared to individual cabling for fiber routing and management of PCB card level and back-plane applications. Their automated fiber routing technology allows for specific point to point layouts that can include fiber crossovers and breakouts.

Common assembly content includes:

1. Materials – Kapton, Fluorosilicon, PEEK, FEP, and adhesives

2. Fiber Types – Singlemode, Multimode, and specialty fibers Rad-Hard or Bend- Insensitive

3. Termination Options – Multi and single fiber connectors, LC and SC 

Other value-add services include; fiber flex fabric design, fiber flex fabric manufacturing, connector termination, and testing for customers specific assemblies.

Important Links Bar.jpg

https://belfuse.com/news-detail/stewart-connector-announces-custom-fiber-flex-assembly-design-and-manufacturing

 

Post Views: 450

Related Articles

Altech: CP Series Terminal Blocks With Push-In Connection Technology
| | | |

Altech: CP Series Terminal Blocks With Push-In Connection Technology

Altech Corporation introduces the CP Series of DIN Rail terminal blocks. It features push-in technology for tool-less wiring of solid wires and flexible wires with ferrules. The CP Series features the industry’s thinnest terminal block of a mere 3.5 mm wide. By increasing wiring density over wider blocks, applications that are space-constrained become more viable. Other key capabilities of the CP Series include stainless steel push-in springs, no special tool needed for pushbutton release of wires.

RS Helps Food and Beverage Manufacturers Overcome Safety and Compliance Challenges
| |

RS Helps Food and Beverage Manufacturers Overcome Safety and Compliance Challenges

RS offers an extensive portfolio of electrical and electronic products engineered to help organizations in the food and beverage manufacturing industry overcome challenges related to the expansive and evolving slate of safety and compliance regulations designed to keep consumers and workers safe. In 2022, the U.S. food and beverage industry was worth about $1.4 trillion, a roughly 5.5% share of the national GDP, largely due to contributions from the food and beverage manufacturing industry, which is consistently the second-largest contributor to overall industry value behind food service. This segment employed around 1.7 million people in 2021 across market segments ranging from meat and dairy processing to baked goods, prepared foods, and beverage manufacturing.

MC-4-Pepperl-PS1000-400.jpg
| |

Pepperl+Fuchs Introduces New PS1000 Industrial Power Supplies

Pepperl+Fuchs recently introduced the all-new, high-efficiency PS1000 industrial power supplies. Industrial power supplies combine optimal performance and high efficiency with durability and reliability, and with a typical efficiency of more than 95%, the new PS1000 is first in its class. Industrial process facilities rely tremendously on bulk power supplies for the control system architecture, but also on critical continuous production process applications that require more than a single off-the-shelf industrial power supply.

 

 

 

PBUS-27-Moore-TMZMODBUS-400.jpg
| |

Moore Industries: TMZ MODBUS Transmitter Reduces Wiring And Installation Costs

The TMZ PC-Programmable MODBUS Temperature Transmitter and Signal Converter provides Analog-to-MODBUS Conversion for a variety of direct signal inputs from a wide array of sensors and analog devices and saves on wiring and installation costs by collecting and concentrating multiple points onto a single MODBUS RTU communication link. The Dual Input model provides even more savings.

 

 

 

PBUS-45-ABB-VitalSafetyController-400.jpg
| |

ABB: Vital Safety Controller

When several safety devices should control the same output, it is quite common to connect them in series. But to reach PL e, serial connection is not possible and each device should have its own safety relay. Vital offers the capability to exclusively control smaller machine safety systems that would otherwise have required a programmable controller or multiple safety relays. With the Vital safety controller, up to 30 safety devices can be connected in series to one Vital and still reach PL e.

 

 

 

Prodrive: Controllers (PLC & Embedded Controller)
| | |

Prodrive: Controllers (PLC & Embedded Controller)

Optimal controller systems – Prodrive Technologies integrates their ARM-based System on Module (SoM) technology with a wide range of standard available interfaces and tailored enclosures, resulting in a product that optimally matches your application. Using their software base, you can rely on reliable interface drivers and security features. Prodrive builds their products from mature building blocks for high quality and short time-to-market.

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect has recently added AchieVe FDM series 12mm tubular photoelectric sensors that offer a rugged metal construction, high IP67 protection ratings, and sensing distances up to 4 meters. These photoelectric sensors feature selectable light-on/dark-on operation, a 10 to 30 VDC operating voltage range, potentiometer or teach-in button sensitivity adjustment, and a fast 1kHz switching frequency. Highly… Read More…

  • METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s premium TECHNOMET-CONTROL HMI enclosures for displays, touch screens and panel PCs can now be conveniently mounted in any suitable indoor location using a new wall mounting kit (accessory). The new kit allows the enclosures to be mounted on walls, machines and other flat surfaces to suit the user’s required location for their HMI system.… Read More…