Panel Builder US

Find articles by Brand and Industry:

Brand: Schurter
Industry Focus: Food & Beverage, General Manufacturing, Healthcare, Industrial, Marine/Offshore, Water & Waste Water
Product Type: Switches/Indicators/Relays/Solenoids

November 5, 2020

The use of switches in wet rooms, spa and pool facilities, requires not only the right choice of switch technology, but can often require unusually long cables. SCHURTER meets this requirement with the launch of the installation-ready piezoelectric switch PSE, an elegant high-end solution.

The pre-assembled polyurethane cable of the new PSE with cable is potted, which offers maximum flexibility and the highest IP protection during installation. Waterproof from switch surface to connection, the cable is 15 metres in length. The installation of the switch is simple by means of a nut.

The housings of the factory assembled piezoelectric PSE family are made of stainless steel 1.4462. This steel is characterised by its particularly high resistance to corrosion, which is essential in areas with high humidity. The PSE switches offer maximum reliability and a long service life (20 million actuations). Hermetically sealed housings make the PSE with cable predestined for use in particularly harsh and inhospitable applications.

Notably, the PSE with cable is resistant to chlorinated liquids and common pool chemicals.

The actuator has a ring illumination with a total of 7 possible display colours. The supply voltage has a range of between 5 - 28 VDC and maintains a constant brightness.

Originally developed for spa and pool builders, it is ideal for use in any sanitary application. Other applications include medical technology, food processing or similar industrial applications where the highest degree of robustness and reliability are required.

  • Waterproof ->from the front surface to the connection point
  • Potted PUR cable for a tight installation
  • High reliability, long lifetime with more than 20 mill. actuations
  • With RGB ring illumination and variable voltage 5 - 28 VDC

 

PSE product page

PSE with cables datasheet

SCHURTER Metal Line Switches

Check PSE swtich availability

 

Editor's Pick: Featured Product News


 

Rittal is replacing its previous KS series with the new fibreglass enclosures AX and so completely redefining fibreglass enclosure technology. The development is based on Rittal’s technology for sheet steel and stainless-steel enclosures, which can be used to greatly simplify and speed up manufacturing processes in panel building and switchgear manufacturing. Now, for the first time, fibreglass enclosures also feature this system technology. This is a win-win situation for plant constructors:

Read More

 

 


 

Featured Articles

  • Prev
As the demand for electric power continues to increase, so does available fault currents. When ...
Much has been said about the potential of big data and artificial intelligence (AI), and there's ...
Recently Panel Builder US had the opportunity to chat with Bill Sellitto, Vice President of ...
Selecting a panel meter for a particular application can be a daunting task, given the wide variety ...
For years, urban citizens have been unhappy with their mobility experience: too much traffic ...
Digital transformation is one of the most urgent issues confronting manufacturers – it’s no longer ...
On any production line, it's imperative to keep things moving. No-reads caused by faulty barcodes ...
Electrical enclosures serve to protect electrical devices from adverse environmental influences, ...

Article Feature - Monthly Industry Focus


JAE recently announced the launch of the MX72C / D Series, a squib connector for automotive SRS devices that conforms to the interface standard with omitted shorting bar (shunt-less), and is becoming popular in Europe and the United States.

Recent changes to automotive passenger safety requirements worldwide is serving as a catalyst to an increased level of collision safety performance, especially in Europe and the United States is expected to grow. In addition to the common SRS devices found in a vehicle, new applications such as knee, thorax and pedestrian airbags have begun to trend in an effort to ensure human safety.

Read More


News for Panel Builders

News for Panel Builders
  • Prev
In support of the company’s long-term strategic plan and as the company continues to develop its ...
AVX Corporation has recently joined the South Carolina Manufacturers Alliance (SCMA), the ...
Graybar recently announced several leadership changes, all of which are effective May 1, ...
Supporting its long-term modernization strategy and building on its goal to remain ...
Trace Software International webinars are presented by our experts to provide you best practices in ...
Yokogawa Electric Corporation and Integrated Commissioning and Qualification Consultants, Corp. of ...
Electronic Components Industry Association (ECIA) was recently pleased to announce that ...
nVent Electric plc  recently announced that Greg Scheu has been appointed to its Board of ...
Pilz provides automation solutions for plant and machinery: complete and simple. From sensor ...
TPC Wire & Cable (TPC), a portfolio company of Audax Private Equity, has recently announced ...

Siemens Smart Infrastructure released its new public fast charger Sicharge D for the IEC markets. It is suited for highway and urban fast charging stations, city parking as well as shopping malls and provides one of highest peak efficiencies on the market at 96 percent, scalable charging power and dynamic power sharing.

“With its upgradability and dynamic charging, it is a big step forward to support the future of eMobility. Our customers can be sure to be prepared for future eventualities of eMobility, be it increasing number of required charging options or increasing charging speeds,” said Birgit Dargel, Global Head of Future Grids at Siemens Smart Infrastructure.

Read More


Whether manufacturing packaging machines or components for airliners, companies must be able to guarantee all metal parts will remain durable and dependable throughout the product’s lifecycle. Recognizing this challenge, LSP Technologies pioneered an effective method to increase the strength of metal parts: surface treatment with pulsed laser beams. One of their most recent laser peening systems relies on the flexibility of EtherCAT and PC-based control technology from Beckhoff to meet the most diverse customer requirements.

Read More

 

Selecting a panel meter for a particular application can be a daunting task, given the wide variety of products that are available today. There are many factors to consider when making a decision. Let’s look at a few of the major items.

Function

Panel meters can be categorized by type, size, style or other criteria. One way to begin the selection process is to look at the meter’s function – what measurement is this meter making? Some common functions are ammeter, voltmeter, frequency meter, power meter, energy meter, counter, timer, temperature meter, process meter, and controller.

Read More