Panel Builder US

January 6, 2021

Variations in the printing or marking method of barcodes and direct part marks (DPMs) - including poor ink distribution, incorrect thermal printer heat settings, or uneven pressure in surface abrasion - can hamper readability. Since no-reads can make production inefficient, it's important to understand the types of print/mark inconsistencies and their causes.

Here, each category of inconsistency will be defined and then some possible solutions discussed.

Types of barcode and mark printing issues

1. Contrast is the difference between the light and dark elements of a barcode, or between the code and its quiet zone (the blank area surrounding a barcode) and other perimeter elements. For example, if the dark elements and the light elements of a DPM are too close in value due to low pressure in the marking process, readability will be poor.

2. Axial non-uniformity refers to the amount of deviation along a symbol’s major axes. (For example, a symbol’s Y-axis could be much larger than its X-axis). This inconsistency of X- and Y-dimensions typically indicates unexpected movement of the substrate as the barcode is applied by a printer or direct part marking device.

3. Grid non-uniformity is the amount of deviation in a barcode’s bar or cell elements from the ideal grid of a theoretical “perfect symbol.” Printing or marking errors that cause grid non-uniformity (usually due to unexpected movement of the substrate during code application) will produce a code that appears skewed or distorted, which may be unreadable by standard decoding devices.

4. Modulation refers to the uniformity between light and dark elements of a barcode. If either set of elements does not have a consistent value, unreadability can result. Like low contrast, this issue is often due to inconsistent distribution of ink for printed codes or uneven abrasion for direct part marks.

5. Print growth is the deviation of symbol element size from the theoretically “perfect” element size for a particular symbol. When a symbol is printed, the ink may bleed when it comes in contact with the substrate, causing an overprint. If there isn’t enough ink or pressure applied by printing or marking equipment, the result may be an underprint.

6. A quiet zone is the area surrounding a barcode that must be kept free of text, marks or other obstacles. When a barcode has been printed outside of the designated quiet zone area and is overlapping with other elements on the substrate, no-reads can result. This issue could be due to misalignment or movement of the substrate in relation to the printing equipment.

7. The reflectance of light from a symbol’s light or dark elements is what lets a barcode reader distinguish symbol elements from the background, as well as light elements from dark elements. Low reflectance may increase the probability that a symbol element may be incorrectly identified as light or dark, causing a no-read when the barcode reader attempts to interpret incorrect element patterns. Low reflectance may be caused by inconsistent print distribution or marking pressure by the equipment.

What can you do about printing inconsistencies?

It’s important to regularly inspect and maintain printing and marking equipment to ensure the production of consistently high-quality barcodes and their correct application to parts. When using ink to print codes, be sure to verify the correct distance of the printhead, clean and unblock printheads and nozzles, and ensure correct speed and setup of the printing process.

If barcodes are produced by laser coding, correct focal distance and a continuous power supply to the equipment ensures high-contrast printing without losses in print distribution or speed. Avoid ribbon wrinkles, verify correct insertion of the ribbon into equipment, and use high-quality technologies to evenly apply barcodes and avoid missing elements.

What can you do about inconsistencies in DPM application?

Direct part marking is accomplished by a number of methods, such as electromechanical etch, laser etch, chemical etch (methods in which codes are “scratched” into the substrate) and dot peen (a percussive method in which the symbol is hammered into the substrate with a metal stylus).

The key to producing high-quality marks by direct abrasion is consistent pressure of the abrading component against the substrate. It’s important to verify the quality of the material used to create the abrasion and the amount of power supplied to the marking equipment to ensure that barcodes are applied uniformly and with consistent pressure.

Important Links Bar.jpg

https://automation.omron.com/en/us/blog/barcode-inconsistencies-blog

 

Editor's Pick: Featured Product News


 

Rittal is replacing its previous KS series with the new fibreglass enclosures AX and so completely redefining fibreglass enclosure technology. The development is based on Rittal’s technology for sheet steel and stainless-steel enclosures, which can be used to greatly simplify and speed up manufacturing processes in panel building and switchgear manufacturing. Now, for the first time, fibreglass enclosures also feature this system technology. This is a win-win situation for plant constructors:

Read More

 

 


 

Products for Panel Builders

  • Prev
Makita U.S.A., Inc. has recently announced their new 18V LXT Cordless 3/8” / 1/4” Sq. Drive ...
The SX5 Series of Safety Laser Scanners has expanded with master and remote models to provide ...
EAO has extended the robust and attractive Series 82 with an overmoulded option and M12 connector. ...
The compact compressor can be adjusted to the required cooling capacity with variable speed via a ...
The GA500 Industrial AC Microdrive is engineered to help you easily handle nearly any application. ...
Molex Off-the-Shelf (OTS) Super Sabre Cable Assemblies deliver a 34.0A current rating and offer a ...
Yokogawa Electric Corporation recently announced that it will begin providing OpreX Batch Solution ...
In TwinCAT, the MTP concept is built into the products TwinCAT MTP Runtime and TwinCAT MTP ...
Rockwell Automation has recently released a new line of IEC industrial relays that save energy and ...
SCHURTER’s proven power entry module, series DD11, provides a high level of functional integration ...

Article Feature - Monthly Industry Focus


JAE recently announced the launch of the MX72C / D Series, a squib connector for automotive SRS devices that conforms to the interface standard with omitted shorting bar (shunt-less), and is becoming popular in Europe and the United States.

Recent changes to automotive passenger safety requirements worldwide is serving as a catalyst to an increased level of collision safety performance, especially in Europe and the United States is expected to grow. In addition to the common SRS devices found in a vehicle, new applications such as knee, thorax and pedestrian airbags have begun to trend in an effort to ensure human safety.

Read More


News for Panel Builders

News for Panel Builders
  • Prev
TPC Wire & Cable (TPC), a portfolio company of Audax Private Equity, has recently announced ...
IndustLabs can engineer and manufacture at scale a wide range of different types of control panels. ...
ABB’s digital energy management and power systems to guarantee reliable uptime and to improve ...
As electrical engineering solution provider EPLAN launches its new partner network, automation ...
Rockwell Automation, Inc.  recently named Bobby Griffin to the newly created role of vice ...
Phoenix Contact teamed up with Belgian network operator Proximus to perform a successful test of ...
Three-phase asynchronous motors are the most widely used electric motors in industrial and ...
Johnson Controls is leading the charge on sustainable manufacturing with its continued commitment ...
Johnson Controls OpenBlue Healthy Buildings solutions are helping the Milwaukee Bucks reopen Fiserv ...

Siemens Smart Infrastructure released its new public fast charger Sicharge D for the IEC markets. It is suited for highway and urban fast charging stations, city parking as well as shopping malls and provides one of highest peak efficiencies on the market at 96 percent, scalable charging power and dynamic power sharing.

“With its upgradability and dynamic charging, it is a big step forward to support the future of eMobility. Our customers can be sure to be prepared for future eventualities of eMobility, be it increasing number of required charging options or increasing charging speeds,” said Birgit Dargel, Global Head of Future Grids at Siemens Smart Infrastructure.

Read More


Whether manufacturing packaging machines or components for airliners, companies must be able to guarantee all metal parts will remain durable and dependable throughout the product’s lifecycle. Recognizing this challenge, LSP Technologies pioneered an effective method to increase the strength of metal parts: surface treatment with pulsed laser beams. One of their most recent laser peening systems relies on the flexibility of EtherCAT and PC-based control technology from Beckhoff to meet the most diverse customer requirements.

Read More

 

Selecting a panel meter for a particular application can be a daunting task, given the wide variety of products that are available today. There are many factors to consider when making a decision. Let’s look at a few of the major items.

Function

Panel meters can be categorized by type, size, style or other criteria. One way to begin the selection process is to look at the meter’s function – what measurement is this meter making? Some common functions are ammeter, voltmeter, frequency meter, power meter, energy meter, counter, timer, temperature meter, process meter, and controller.

Read More