4 Types of Motor Duty Cycles Every Engineer Should Know

April 21, 2020

What Are Motor Duty Cycles?

When selecting a motor, it is important to consider the required duty cycle to ensure the motor can meet the needs of the application.  This blog post and the accompanying light board video will provide a basic introduction to motor duty cycles and a few of the most common types of duty cycles.

The International Electrotechnical Commission (IEC) defines eight classifications for duty cycle which are grouped by continuous, short term, or periodic cycles.  These cycles refer to the sequence and durations in time of all aspects of a typical operation, including starting, running with no load, running with full load, electric braking, and rest.  These operations are viewed by how they affect the motor temperature in order to determine if the selected motor is correct for the application, if increased cooling such as a forced ventilation fan is required, or if a whole new motor should be used.

{videobox}O-ODHlWzDj8{/videobox}

#1 Continuous Duty (S1)

The first, and simplest, type of motor duty cycle is continuous duty.  This is also referred to by its abbreviated name, S1 duty (Figure 1).  In this type of operation, the motor runs with a constant load for a long enough duration so that it reaches thermal equilibrium.  This also assumes the starting of the motor can be considered to have a negligible effect on the motor temperature.  An example of S1 duty would be a fan that is switched on and then let to run non-stop

#2 Short Time Duty (S2)

Motor-Duty-Cycles_Short-Time-Duty.jpg

The second type of motor duty cycle is short time duty.  Similar to continuous duty, this operation runs with a constant load.  Unlike continuous duty, it is shut off before it reaches thermal equilibrium.  The motor is then allowed to rest long enough for it to reach ambient temperature.  Short time duty is designated by S2 followed by the number of minutes in the cycle (S2 30 minutes).

Periodic Duty (S3-S8)

Periodic duty refers to the designations S3-S8.  These include cycles with and without rest that have starting, electric braking, and/or changing speeds/loads.  Throughout all of these designations, the various operations of the cycle are repeated over time and the motor is not allowed to reach thermal equilibrium.

#3 Intermittent Periodic Duty (S3)

Motor-Duty-Cycles_Intermittent-Periodic-duty-graph.jpg

Intermittent periodic duty is the simplest type of periodic duty.  This sequence of identical cycles each contain a period of constant load and a period at rest.  This is very similar to S2 duty, but differs because it never reaches ambient temperature during its rest period.  This duty cycle is abbreviated as S3 followed by the percentage of time under load (S3 xx%, where the % = ∆Tc/T).  An example of intermittent periodic duty could be a conveyor that runs at constant intervals with the same loading.

#4 Continuous Operation with Electric Braking (S7)

Motor-Duty-Cycles_Continuous-Operation-with-Electric-Braking.jpg

The final example of motor duty cycle is continuous operation with electric braking.  This cycle includes a sequence of starting, constant load, and electric braking.  Additionally, there is not time during the operation for rest.  This type of duty cycle is abbreviated as S7 followed by the moment of inertia of the motor and load (Jm and JL).

The other periodic duty cycles S4-S6 and S8-S9 as similar to S3 and S7, but can be done with or without rest, starting, braking, and loading.

Conclusion

When purchasing a motor, it is important to consider the required operation and declare the duty cycle.  This ensures the proper motor is selected for the application.

Important Links Bar.jpg

https://www.kebamerica.com/blog/4-types-of-motor-duty-cycles-every-engineer-should-know/

 

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.


Products for Panel Builders

  • Celduc: New SMQR Quad Series Solid State Relay

    Celduc: New SMQR Quad Series Solid State Relay

    Celduc’s Solid State Relays are designed for industrial applications where fast and long electrical life in switching is required. Celduc has recently launched a new range of Quad AC Output Solid State Relay. With this new SMQR Series you will get four independently controlled AC output Solid State Relays in an industry standard package. With the models… Read More…

  • Brady: M211 Portable Bluetooth Label Printer

    Brady: M211 Portable Bluetooth Label Printer

    Design. Preview. Print. All from your phone. The M211 portable Bluetooth label printer is a tough, compact labeler that belongs on any jobsite. Seamlessly design, preview and print labels right from Brady’s Express Labels Mobile app for iOS and Android. Create custom labels from your phone’s familiar keyboard via ultra strong BLE Bluetooth technology. Maximize… Read More…