|

Mitsubishi Electric Automation, Inc. Helps to Improve OEM’s Production Output by 300% with Implementation of Servo Motors and Amplifiers

October 9, 2024

Genesis Packaging Technologies moved from a customized to a standardized automation platform, which reduced lead and build times while increasing output by 300%.

Mitsubishi Electric Automation, Inc. prides itself on its servo motors and amplifiers portfolio, known for its high-performance capabilities, flexibility, and versatility for various applications.

When an OEM of vial capping equipment, Genesis Packaging Technologies, reached out to Distributor, Moxley Electronics, for a solution to upgrade their existing line of equipment, Moxley recommended Mitsubishi Electric for their motion control platform that could deliver both precision and performance. Genesis’s laboratory and high-speed production equipment were upgraded to standardize on off-the-shelf EtherNet/IP MR-J5 Servo Drives and Amplifiers from Mitsubishi Electric. The standardization resulted in half the lead times for their newest machine, and production output went from building 5-10 machines a year to building 30 or more a year. Another benefit of using the MR-J4 motion control platform was its compatibility with third-party devices, allowing the customer to continue using their PLC not manufactured by Mitsubishi Electric.

When asked about the collaboration with Mitsubishi Electric Automation regarding this solution success, Kevin Stofflet, Engineering Manager at Genesis Packaging Technologies, stated, “We standardized on the Mitsubishi Electric drive and the motor across our new machines, so we only have one supplier for all our servo needs. That means we only have to stock one motor and one drive.”

Important_Links_Bar.jpg

Learn More

Post Views: 331

Related Articles

PB 25 Rockwell newlogo 400

Top Food & Beverage Cybersecurity Challenges

The May 2021 ransomware attack on JBS Foods that knocked out the plant operations supplying roughly a fifth of the United States’ meat supply is an all too familiar story. Since September of 2021, the Federal Bureau of Investigation (FBI) has been alerting food producers, processors, and manufacturers via an industry-specific notice that criminals are carrying out focused ransomware attacks targeting companies in this sector.

 

 

 

Fault Managed Power Revolutionizes Power Distribution
|

Fault Managed Power Revolutionizes Power Distribution

Building infrastructure solutions are continually evolving. The effort to make buildings more efficient, more sustainable, and better optimized has led to a myriad of innovations over the years. In this sea of innovation, the emergence of Class 4 power solutions (including our own Panduit Fault Managed Power System) stands out as a true game-changer for building owners and managers. As companies look to the future, Class 4 power solutions are poised to transform the way critical systems are powered in buildings.

PBUS-45-UCEC-PostPandemic-400.jpg

Control Panel News – Post-Pandemic Lead Times

Ongoing supply chain issues continue to wreak havoc with control panel delivery times. With supply shortages, people couldn’t wait until the last minute to order parts and build their control panels. With turnarounds pushing six weeks or even longer, a lot more planning has become necessary. UCEC can be a resource to help you plan, so don’t be afraid to reach out and ask for whatever you need.

 

 

 

Electrical Service Upgrades Should Be a Priority for All Businesses

Electrical Service Upgrades Should Be a Priority for All Businesses

In the year of 2017, a report from the United States Fire Administration indicated that over 8,000 businesses experienced electrical fires. In total, the losses exceeded $430 million. While it is true that most businesses throughout the United States perform standard levels of upkeep in order to properly maintain their commercial property, it is also true that many neglect maintenance and servicing of their electrical systems until a problem develops.

 

 

 

DCS 6 Yokogawa logo 400

Yokogawa and InSphero Enter into Partnership Agreement

Yokogawa Electric Corporation recently announced that it had entered into a partnership agreement with InSphero AG, a pioneer in the development of 3D in vitro technologies for drug discovery and safety. The two companies aim to establish and advance methods for the use of high-content analysis (HCA) in drug discovery and safety assessment. They will jointly promote and support the use of high-value-added HCA solutions in drug discovery research that involves the use of 3D in vitro models.

 

 

 

What Design Features to Look for in a Standard Modular Enclosure
|

What Design Features to Look for in a Standard Modular Enclosure

The National Association of Manufacturers (NAM) identified the need to create growth and expand facilities as one of the top trends for manufacturers in 2023. However, the ability to create long-term, sustainable growth hinges on the efficiency and adaptability of your automation infrastructure. When it comes to large enclosures, the choice usually comes down to unibody construction versus a more modular approach. Designing around standard modular enclosures has a much higher ceiling in terms of unlocking new growth opportunities.

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect has recently added AchieVe FDM series 12mm tubular photoelectric sensors that offer a rugged metal construction, high IP67 protection ratings, and sensing distances up to 4 meters. These photoelectric sensors feature selectable light-on/dark-on operation, a 10 to 30 VDC operating voltage range, potentiometer or teach-in button sensitivity adjustment, and a fast 1kHz switching frequency. Highly… Read More…

  • METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s premium TECHNOMET-CONTROL HMI enclosures for displays, touch screens and panel PCs can now be conveniently mounted in any suitable indoor location using a new wall mounting kit (accessory). The new kit allows the enclosures to be mounted on walls, machines and other flat surfaces to suit the user’s required location for their HMI system.… Read More…