Find articles by Brand and Industry:
- Industry Focus: Food & Beverage, General Manufacturing, Industrial, Water & Waste Water
- Product Type: Displays/HMI
Housed in a NEMA 4X waterproof and corrosion-resistant stainless steel enclosure, the new 27” waterproof industrial-grade LCD monitor offers a brightness level of 300 nits.
Pro-face America announces the release of the new SP5000X eXtreme HMI Series. The rugged HMI is commonly used in hazardous conditions, including outdoor applications.
Read more: Pro-face America Launches Harsh Environment HMI...
Beckhoff enhances offerings of components for explosion protection up to Zone 0. The expansive product portfolio for explosion protection includes nearly the entire range of EtherCAT Terminals and Bus Terminals for the intended use in Zone 2 and 22.
C&K's new PNP3 Series sealed pushbutton switches for industrial and off-road transportation applications feature a low operating force. A no-cap option, further increases the versatility of this switch offering.
Read more: IP68 Sealed Pushbutton Switches Available with...
Roxtec single and multi-cable transits protect against harsh environmental conditions. The CF 16 AISI stainless steel cable transists are designed to provide IP69K, IP67 or IP66 ratings in a small package. The cable transits are ideal for modern connected machine builders, smart factories, and more.
Pepperl+Fuchs has launched a rugged LC20 loop detector that features a diagnostic tool and intuitive app. The new LC20 loop detector, combined with the induction loops installed in the ground, detects various vehicle combinations and quickly diagnoses and visualizes the data via a user-friendly app.
The PowerXL DA1 advanced variable frequency drive is ideal for demanding applications that are speed- and torque-dependent. Eaton’s PowerXL product family delivers outstanding performance regarding motor control and modularity.
FiberSource now offers Active-S Humidity Control Sheets, a maintenance-free alternative to desiccants, heaters, dehumidifiers, thermostats, hygrotherms, hygrostats, and corrosion inhibitors for preventing excess moisture in cabinets, enclosures, and cases. When humidity in the enclosure is high, the humidity control sheet absorbs the excess moisture, reducing humidity levels inside the cabinet. But when the cabinet becomes dry, the sheet “breathes out” the moisture, maintaining relative humidity at or under 60% in the cabinet.
Read more: FiberSource’s Active-S Humidity Control Sheets...
NKK Switch has enahcned its popular M Series with the introduction of a IP67 rated knurled toggle. The new toggle features a knurled, textured lever that enables a firm nonslip grip.
Laird Thermal Systems’ highly efficient thermoelectric assemblies (TEAs) significantly improve performance and lowers operating costs of applications in rugged outdoor environments. Designed for applications like outdoor kiosks, battery backup cabinets, enclosures, and electronic cabinets, the Outdoor Coolers run at nominal voltages at either 24 or 48 VDC and offer dependable cooling capacities ranging from 100 to 480 Watts.
Page 1 of 2
Editor's Pick: Featured Product News
Beckhoff: C60xx Ultra-Compact Industrial PCs
Extremely space-saving and flexible
The C60xx series of scalable ultra-compact Industrial PCs combines maximum computing power in what is currently the most compact format with a wide range of options for installation in the control cabinet. It is ideally suited for control, visualization and communication, for example into the cloud.
The latest Intel processors − in three different performance classes, from the Intel Atom with one core to the Intel Core i7 with eight cores – offer maximum scalability and power density with an optimal price-performance ratio.
Performance classes and application areas
The C601x series offers Intel Atom computing power for a wide range of automation and visualization tasks. Due to their impressive computing power in relation to their size, the PCs are mainly suited for use in Industrie 4.0 applications, for example as an IoT gateway.
The C603x series unites high-performance Intel Core-i processors with extremely compact housing dimensions. The processors from the 65 W class have only been used in the much larger ATX-based Industrial PCs up to now. The devices thus represent a new dimension in terms of power density. They are suitable above all for particularly complex automation and visualization tasks, but also for a wide range of other applications in the field of image processing, the handling of large volumes of data and in the IoT environment.
The C602x series is the link between the C601x and the C603x, and the fanless integration of Intel Core-i-U processors of the 15 W class opens up new application areas and options.
TE Connectivity's Mezalok Mezzanine Connector Gets an Upgrade With Increased Data Rate Support up to 32+ GB/S
TE Connectivity has recently upgraded its rugged, high-speed Mezalok mezzanine connector family to support the growing demand for higher data rates and improved processing power in military electronics. The upgraded connectors have increased data rate support up to 32+ Gb/s. The Mezalok connector family has been designed specifically for mezzanine cards in rugged applications and is standardized as the interconnect for XMC 2.0 (VITA 61). Rapidly evolving technologies in signal intelligence, radar, communications and surveillance are driving the need for more powerful embedded computing solutions.
Mezzanine cards are often used to provide additional functionality and processing capability within a small form factor. TE designed the Mezalok connector family to support these applications. Typical applications include application-specific high-speed input/output (I/O) protocols, graphics, memory and digital-signal processing.
“New designs in rugged embedded computing require higher speeds and high pin counts in order to pack more functionality into smaller plug-in modules,” said Jason Dorwart, product manager for TE’s Aerospace, Defense and Marine division. “TE recognizes this trend and is continuing to build on this platform to help solve customer needs, offering new options in stack height, pin density and higher speeds, giving the system designer a broader solution set to work with when needing a fast, rugged and reliable mezzanine connector for extreme environments.”
TE’s highly reliable Mezalok mezzanine connectors more than double the speed and durability of competing technology, making it one of the most viable options for today’s military and commercial aerospace applications.
Products for Panel Builders
Editor's Pick: Featured Article
5 Mechanical & Electrical Problems A Maintenance System Can “See” That You Can’t (But Need To)
Building systems, such as HVAC, consist of thousands of components that work together to keep occupants comfortable and safe. Preventative maintenance helps ensure all these pieces stay in good condition, through inspecting and checking for worn parts.
However, inspections can’t find every issue. Even with a detailed maintenance program in place, you may not uncover some problems until it’s too late. The solution? Using a building maintenance system to reveal hidden issues.
Here are five problems that a maintenance system can “see” that you can’t.
1. Dampers Not Opening/Closing All The Way
When dampers fail to open or close completely, it affects their operation but doesn’t necessarily cause a system malfunction. Unless you’re specifically checking dampers, you won’t find this problem without the help of a building automation maintenance system.
A maintenance system tracks conditions over time to look back at past readings—if they begin deviating from expected values it indicates a potential issue. For example, if normal operations require dampers to be 30% open and they’ve been trending closer to 50% to reach the same conditions, you know something’s off. Problematic dampers left unfixed will increase energy costs and eventually cause equipment damage.
2. Sensor Drift
Sensor accuracy shifts as time goes by, and readings become less and less reliable. Simply looking at a sensor won’t reveal that it needs recalibration because sensor drift happens slowly over time.
News for Panel Builders
