Panel Builder US

 

The AB-CO PURGE Model AP-01Z-02 Purge and Pressurization System is a Z-Type system designed specifically for small electrical enclosures with volumes up to 2 cubic feet (0.056 cubic meters). As a Z-Type purge and pressurization system, the Model AP-01Z-02 reduces the classification within the electrical enclosure used in a Class I, Division 2 (Groups A,B,C,D) and Class II, Division 2 (Groups F&G) hazardous environment from Division 2 to unclassified.

 

TE Connectivity P-ClampTE Connectivity (TE) P-Clamp provides a light, fast, and efficient solution to mounting cable harnesses. (10) TE P-Clamp sizes cover the full cable diameter range of (21) AS21919 P-Clamp sizes. Faster install times and lighter weight, give TE P-Clamps a lower applied cost than standard AS21919 P-Clamps.

Roxtec CF 16 AISIRoxtec single and multi-cable transits protect against harsh environmental conditions. The CF 16 AISI stainless steel cable transists are designed to provide IP69K, IP67 or IP66 ratings in a small package. The cable transits are ideal for modern connected machine builders, smart factories, and more.

 

AutomationDirect DLO Heavy Duty CableAutomationDirect has developed a heavy duty power cable that can be cut-to-length to meet application requirements. Suitable for use in both wet and dry environments, the DLO Heavy Duty Cable is extremely flexible with a tight bend radius that allows easy installations in tight spaces.

 

Pepperl+Fuchs introduced the latest addition to its market-leading portfolio of purge and pressurization solutions at this year's SPS fair in Nuremberg. The Bebco EPS® 6100 series was specially designed for use with large motors, drives, compressors, and enclosures in ATEX/IECEx Zone 1 hazardous locations. The largest purge and pressurization system available from Pepperl+Fuchs to this day, the automatic 6100 series system can purge enclosures that are larger than 12.2 m³ (450 ft³). This new system is ideally suited for applications in the chemical, petrochemical, and oil and gas industries.

 

FiberSource Active-S FiberSource now offers Active-S Humidity Control Sheets, a maintenance-free alternative to desiccants, heaters, dehumidifiers, thermostats, hygrotherms, hygrostats, and corrosion inhibitors for preventing excess moisture in cabinets, enclosures, and cases. When humidity in the enclosure is high, the humidity control sheet absorbs the excess moisture, reducing humidity levels inside the cabinet. But when the cabinet becomes dry, the sheet “breathes out” the moisture, maintaining relative humidity at or under 60% in the cabinet.

bfgnbf.jpg

Offering EMI/RFI shielding from the RF range through the microwave Ka Band, the Ka Shield™ equipment rack enclosure from Equipto Electronics protects communications and data up to 40GHz. With shielding effectiveness of over 75 dB at 40 GHz, the enclosure has been designed to protect the most sensitive equipment from any signal intrusions or leakage. 

APS APS BC-6964 battery chargerDesigned to operate in hazardous environments, the BC-6964 Battery Charger from Applied Power Systems provides seamless transition from a voltage source to current limit operation for optimum battery charging. 

Belden Octopus SwitchBelden expands the Hircschmann OCTOPUS family to include IP65/IP67 waterproof and dust-tight switches that allow fail-safe networks to be installed in a variety of application scenarios, even under the most difficult conditions.

 

 

UCC*-50GK Ultrasonic SensorPepperl+Fuchs has expanded its ultrasonic sensor family with a new, more modular model for increased design flexibility. The UCC*-50GK ultrasonic sensor simplifies integration, and can even be integrated into an application without a PLC and transfer data directly to the IoT cloud.

Products for Panel Builders

  • Prev
Higher amperage relay output modules and an 8-point input simulator module are now available from ...
Available immediately from ADVANCED Motion Controls are three new additions to the ...
Remee Wire & Cable, a high-integrity manufacturer of electronic wire and cable for reliable ...
KEB America recently introduced the new C6 HMI, a moisture and water-resistant stainless steel ...
B&R has added the powerful T80 operator terminal to its Power Panel T-Series. A ...
Bel Fuse-Circuit Protection, a Bel group company and global manufacturer of fuses, recently ...
So-called REST (Representational State Transfer) APIs are frequently offered by web servers in IoT ...
Wherever cables with or without connectors, conduits or pneumatic hoses have to be routed into ...
Phoenix Contact is now also supplying its modular ICS series DIN rail housings in an overall width ...

News for Panel Builders

News for Panel Builders
  • Prev
NSI Industries, LLC, a provider of electrical and control products, today announced the appointment ...
Through the website, Schmersal is showcasing more than 7000 safety and automation products, from ...
ifm is proud to announce that it has been certified by the Top Employers Institute for its ...
As you may be aware, on October 13, 2019, Pilz was hit with a cyberattack. As soon as Pilz became ...
How much do you ❤️ Hammond? We're looking for your photos of our products installed, ...
nVent Electric plc recently announced the acquisition of substantially all of the assets of WBT ...
The EPLAN Data Portal is an integral part of the EPLAN drawing platform, which enables users to ...
As part of its effort to help designers, engineers and maintenance repair operators better locate ...
On Tuesday, January 21st, employees, customers, community members, and local officials gathered to ...
Power management company Eaton recently announced it has agreed to acquire Power Distribution, Inc. ...