To submit an event for our calendar, please email owenhurst@panelbuilderus.com
Events Calendar
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
Editor's Pick: Featured Product News
Control Cabinet Cable Entry Systems From AutomationDirect
The KDL/D cable entry system allows cables to be installed through enclosures or other bulkhead surfaces, with the added benefit that pre-made, terminated cables can be installed without disassembling the connectors. The split-frame system enables the quick and simple installation of up to 48 cables in a single frame. Four frame sizes, starting at $16.00, fit standard cut-out dimensions and provide integrated strain relief. The KLD/D system’s robust multi-part frame design gives better mechanical stability while achieving a high degree of environmental protection.
The multi-part split-frame system clamps together with a grommet block and grommets to provide a high-density cable entry point with an IP65 environmental rating. Small and medium size grommets (from $6.00) accept cable diameters from 0.08 to 0.87 inches (2 to 22mm).
Products for Panel Builders
Editor's Pick: Featured Article
4 Types of Motor Duty Cycles Every Engineer Should Know
What Are Motor Duty Cycles?
When selecting a motor, it is important to consider the required duty cycle to ensure the motor can meet the needs of the application. This blog post and the accompanying light board video will provide a basic introduction to motor duty cycles and a few of the most common types of duty cycles.
The International Electrotechnical Commission (IEC) defines eight classifications for duty cycle which are grouped by continuous, short term, or periodic cycles. These cycles refer to the sequence and durations in time of all aspects of a typical operation, including starting, running with no load, running with full load, electric braking, and rest
Panel Building Tips
Thermoelectric Cooling for Outdoor Kiosks
Outdoor kiosks have grown in popularity in a wide variety of applications and sectors, including banking, entertainment, retail, showrooms, industrial and education. You see kiosks everywhere, from banks and airports, to theme parks and train stations. Often located outdoors, kiosks and the sensitive electronics they contain are subjected to extreme temperatures, from the cold of winter to the heat of summer. Ambient temperatures can exceed 40°C or below 10°C. Heat loads for the electronics themselves can range from 20 to more than 200 Watts. These extreme temperatures and heat loads can often exceed the operating temperature limits of the sensitive electronics inside, which in turn can affect their functionality and lifespan.
In addition, the demand for higher telecommunication speeds and computing power through 4G/5G networks and always-on broadband services places a huge demand on the kiosk infrastructure.
News for Panel Builders
