The 338 Series Optical Wavelength Meter from Bristol Instruments combines speed and affordability to address the most important requirements of optical transceiver manufacturers. The model 338 has a high measurement rate of 25 Hz that results in reduced testing times and greater production throughput. And, its affordable price point, along with a five-year warranty, provides the lowest cost of ownership compared with similar systems.
Bel Power Solutions, a Bel group company introduces 100W 4-pair, Power over Ethernet, NBASE-T / 802.3bz Magnetic Modules. The 100W Magnetic Modules are aimed at engineers who are developing products to be compliant with the NBASE-T / IEEE 802.3bz and 802.3bt standards, while optimizing performance and reliability. The 100W 4-pair PoE Magnetic Modules can transmit up to 100W of power, utilizing Ethernet cable that is compatible with the desired bandwidth.
The safe sensorless standstill monitor UG 6946 from the SAFEMASTER S series detects the standstill of 3-phase and 1-phase motors independent of the direction of rotation. This means sensors such as encoders or proximity switches are not required. Access to the danger zone of a system is only possible by the enabling signal of the standstill monitor after the drive has been switched off and run down.
Cinch Connectivity Solutions, a Bel group company, now offers a 2.92mm Quick Connect Adapter and High Frequency SMA Quick Connect Adapters, designed to adapt from a standard threaded jack to a Quick Connect Plug. These adapters are designed to allow for rapid test connections to devices using 2.92mm and SMA connectors, resulting in a more efficient testing process by reducing the time and effort required to connect and disconnect the test cable.
The Fluke PQ400 Electrical Measurement Window enables the connection of three phase measurement equipment to energized panels, without the need to open the panel door, or wear supplemental personal protective equipment (PPE). The Fluke PQ400 gives you access to the critical power quality and energy data you need, all while decreasing testing time and helping you to maintain safety.
In early November of 2020, Honeywell announced the release of Measurement IQ (MIQ) Optimize – an enterprise-wide solution for monitoring meters, gas chromatographs and other measurement assets. The new software solution collects and analyses diagnostic information from devices across different sites for a real-time overview of metering health.
The configurable safe small controllers PNOZmulti 2 are used in virtually every area of plant and mechanical engineering. PNOZmulti 2 can be used to monitor safety functions safely and to perform standard control functions economically. The configurable, safe small controllers PNOZmulti 2 have a modular design: select a base unit and then choose the required number of expansion modules to meet the needs of your application.
Mico Pro is the innovative current monitoring system from Murrelektronik for 12 and 24 VDC applications with patented tripping process. The modular system enables you to adapt systems precisely to suit specific applications – offering a favorable cost-benefit ratio while also being economical in their use of space. The patented tripping process assures optimum machine availability. An additional benefit: an integrated concept for potential distribution that significantly declutters the switch cabinet wiring.
If a machine or system is expected to produce potentially hazardous overtravel movements, a combination of safety interlock on the guard and standstill monitor in the switch cabinet can provide the requisite level of safety. The SSW303HV is the Schmersal Group’s latest sensorless standstill monitor, offering a significant improvement over its AZR and FWS series predecessors.
Electrical system breakdowns are a leading cause of equipment and business interruption losses. It’s a growing problem and the losses can be substantial. A common factor in determining the reliability and uptime of an electrical system is the condition and the availability of the power distribution equipment such as medium voltage and low voltage switchgear, transfer switches and MCCs used in the downstream.
Transducers measure, isolate, and convert electrical parameters into industry standard DC output signals and broadcast results via communication interface options such as RS232 and the Modbus digital protocol. These vibration resistant transducers protect against high voltage and overload. Integra transducers measure up to 50 electrical and power quality parameters and offer up to four user-programmable analogue outputs.
The Integra Ri3 dms is an accurate and cost effective solution for measurement and display of all major electrical and power quality parameters with easy programming and user friendly navigation in DIN 43880 enclosure. The product features a DIN-rail enclosure, backlit LCD display and user programmable CT ratios, all accessible via an intuitive user interface.
Quality engineered energy submeters provides a simple robust solution for power monitoring, power quality analysis, kWh metering, system integration, controlling power distribution systems & other speciality applications. The Acuvim II is a high-end multifunction power meter for monitoring and controlling power distribution systems. Plug-in modules expand the I/O capabilities.
Dura-Con / Cinch Connectivity Solutions Micro-D Connector Savers are designed to significantly reduce damage to already mounted Dura-Con Connectors during routine system tests. Dura-Con / Cinch Micro-D Connector Savers eliminate the numerous mating and unmating cycles experienced by connectors on test harnesses. Connector Savers are available in all-plastic or in a metal shell.
Siemens Smart Infrastructure recently launched its new PowerLink CM, a condition monitoring solution for high-voltage AC and DC transmission lines. To ensure reliable power supply, optimize grid utilization and prevent blackouts the device is designed to precisely locate faults in the transmission grid and continuously track line conditions. One single PowerLink CM device is sufficient to monitor line lengths of up to 500 km.
Red Lion’s PAX meter is the workhorse of their panel meter line-up. Models include both digital and analog inputs. From its sunlight readable display to the wide variety of field-installable options cards, the PAX meter will easily handle your application requirements. The PAX line offers a five or six digit display available with a red sunlight readable red display, or green for indoor applications.
