Switches / Indicators / Relays / Solenoids

PB-55-Noark-Ex9RE-400.jpg
| | | |

Noark: Ex9RE Electronic Thermal Overload Relay

NOARK Electric Ex9RE electronic thermal overload relays are designed to provide dependable and accurate protection for motors if an overload or phase failure occurs. It also offers jam, stall and current unbalance protection. The Ex9RE is available with three different power supply voltages: 24 Vac/ Vdc, 110/120 Vac and 220/240 Vac. with current ranges from 0.1A to 40A.

 

 

 

PBUS-37-Burkert-70117012Solenoids-400.jpg
| | | |

Burkert: Solenoid Valve Types 7011 and 7012

Burkert’s compact and powerful solenoid valve types 7011 and 7012 are now available with the circuit function “normally open”, the plug form C as well as the approval DVGW EN 161 for fuel gases or as encapsulated variant for the use in potentially explosive atmospheres (ATEX, IECEx). More and more compact and at the same time powerful valves are required in potentially explosive atmospheres or when combustible gases are used.

 

 

 

PBUS-36-TTI-OMRONG8PM-400.jpg
| | |

OMRON G8PM High Power PCB Relay Available at TTI

TTI, Inc. is now stocking the G8PM Relay from OMRON. The High Power G8PM Relay is suited for 12VDC motor and resistive control applications and can support a 60A fuse. Its small size and heat resistance enable usage in the engine compartment. It has a temperature range of -40°C to +125°C and is pin-in-paste compliant. Typical applications include motor and resistive application control, headlights, main power, EPS and DC/DC converters.

 

 

 

PBUS-36-steute-WirelessSwitchgear-400.jpg
| | | |

steute: Wireless Switchgear for Two-Component Injection Moulding

Wireless, not cabled: according to this principle, wireless switches and sensors from steute guarantee safe, reliable and cable-free signal transmission in a wide range of applications. One interesting area for this solution is plastic injection moulding, especially multi-component processes which often involve machines with rotary plates. These plates enable the main part of the construction element to be moulded first and then – after rotating the plate by 90 or 180° – injection of the second part.

 

 

 

PBUS-35-Mennekes-CDSControlSwitch-400.jpg
| |

CDS Motor Disconnect With Control Switch For Safety and Space Savings

MENNEKES CDS curved-top disconnect switches offer an option to add a three-position selector switch or other control and push-button devices. Save valuable space and cost by reducing parts while enhancing safety for maintenance staff. Stocked in TEST–OFF–RUN, this model incorporates the 30A CDS enclosure and control switch, eliminating the cost and labor associated with installing a second box.

 

 

 

PB-53-BR-X90SafetyRelay-400.jpg
| | |

B&R Automation: More Safety for Mobile Machinery

Mobile machines are becoming increasingly autonomous. They require controllers that are not only compact, but also safe. B&R has expanded its X90 control system with an option board that allows floating-ground connection of external safety devices, making mobile machines even safer. Mobile controllers with safe, floating outputs have previously not been available on the market.