Product News

PBUS-28-Fuji-7500WXSeries-400.jpg
| | |

Fuji Electric: Meeting Rising Demand for Data Centers – Launch of the 7500WX Series, a High-Capacity Uninterruptible Power Supply System

With the development of cloud information systems and e-commerce, more data centers are being constructed around the world. Data centers must supply power continuously in order to protect, maintain, and operate servers that store important information and to provide Internet connection lines. By combining the equipment necessary to create a data center, Fuji Electric is able to offer multiple integrated services.

 

 

 

PBUS-30-WAGO-MountingAdapters-400.jpg
| |

WAGO: Secure and Flexible Mounting

Secure flying leads using WAGO’s new mounting adapters for the MCS MAXI 6 and 16 PCB Connection Systems with levers. A flexible yet secure mount? It sounds contradictory, but it’s not. WAGO’s new mounting adapters for the MCS MAXI 6 and 16 PCB Connection Systems with levers prove that security and flexibility can co-exist. As industry-firsts, these mounting adapters allow flying leads with cross-sections up to 25 mm2 to be easily secured to a DIN-35 rail or panel.

 

 

 

PBUS-30-Hammond-Type12LayInWireway-400.jpg
| | |

Hammond Manufacturing: Type 12 Lay-In Wireway

Introducing the Type 12 Lay-In Wireway from Hammond Manufacturing, designed to enclose and protect electrical wiring from dirt, dust, oil and water. All sections and fittings of the wireway are completely open on each side to allow wires and cables to be placed into the wireway without ‘pulling through’. The Type-12 has UL 870 Type 1 and CSA Type 1 standards, unless marked, and complies with NEMA Type 12 and IEC 60529, IP54 standards.

 

 

 

PBUS-26-HARTING-HanL32B-400.jpg
| | | |

HARTING: Han L32 B Offers Optimal Use Of Installation Space

Using an L32 B connector allows users to replace two size 16 B interfaces — saving over 40% of installation space. This makes it possible to transmit power, signals and data with fewer interfaces and fewer components. It also cuts the time required to assemble interfaces. The resulting lower weight also benefits a number of other applications, e.g. in robotics. The solution not only saves space, it also makes a contribution to lower consumption – and thus stands for sustainable product design.

 

 

 

Do Not Touch: A New Generation of Touchless Switches
| | | | | |

Do Not Touch: A New Generation of Touchless Switches

A new generation of switches for touchless switching has been developed for switching without touching. Switching without contaminating the surface with potentially harmful germs, viruses or bacteria. How do these switches work and what are they capable of?

MC-9-PSAMCMotionControllerP1RXRemote-400.jpg
| | |

PS-AMC Motion Controller and P1-RX Remote I/O Module from AutomationDirect

AutomationDirect has added PS-AMC motion controllers designed to work seamlessly with select Productivity PLCs to provide accurate, coordinated, plug-and-play motion control. These controllers are capable of up to 4 coordinated axes of motion per controller (PS-AMC4) with differential encoder feedback for each axis and a maximum switching frequency of 1MHz. Up to 24 general-purpose high-speed inputs and 12 general-purpose high-speed outputs are also included.

 

 

 

PB-48-Flir-NeutrinoSX8-400.jpg
| |

Teledyne FLIR Introduces Neutrino SX8 Mid-Wavelength Infrared Camera Module and Four Neutrino IS Series Models with Integrated Continuous Zoom Lenses

Teledyne FLIR, part of Teledyne Technologies Incorporated (NYSE:TDY), recently introduced the Neutrino SX8 mid-wavelength infrared (MWIR) camera module and four additional Neutrino IS Series models designed for integrated solutions requiring HD MWIR imagery with size, weight, power, and cost (SWaP+C) constraints for commercial, industrial, defense original equipment manufacturers (OEM), and system integrators.

 

 

 

PBUS-30-CK-ELSealedTactileSwitch-400.jpg
| |

C&K’s New Sealed Tactile Switch – El Series

C&K, a major manufacturer of high-quality electromechanical switches, has recently developed a versatile sealed tactile switch which will fit a wide variety of applications across markets. The EL tactile switch combines common heights and actuation forces, to target similar products in the marketplace, while providing a longer lifecycle than competitors at 200,000 cycles.

 

 

 

PBUS-30-Banner-Q45Sensors-400.jpg
| | |

Banner Engineering: D-Cell Photoelectric Q45 Sensor Delivers Four Years Battery Life to Self-Contained, Wireless Sensor Family

The Q45 line of photoelectric sensors is now available in a D-cell battery version, extending its maintenance-free service interval to four years. This doubles the battery life of existing versions with smaller batteries. The Q45 sensor line is a family of wireless, self-contained units for coordinating multiple machines in part-counting, and OEE applications. Each model combines a sensor, wireless node, and an internal battery in a single device.

 

 

 

PBUS-30-Schmersal-RSS260SafetySensor-400.jpg
| | |

Schmersal: RSS260 Safety Sensor With New Cost-Saving Features

(Wuppertal) The Schmersal Group has further developed its compact RSS260 safety sensor and equipped it with new software – the sensor now offers four additional, optionally selectable functions: – Feedback loop monitoring – Automatic restart / manual restart – Reset – Emergency stop monitoring. On the F0/F1 version, the RSS260 assumes the tasks of a safety relay module, i.e. monitoring of the movable safety guard as well as of the contactors directly actuated by the sensor outputs.

 

 

 

PBUS-30-Bel-TypeNCoaxConnectors-400.jpg
| |

High Power, Low Loss Type N Connectors, Operating up to 4 GHz

(Waseca, MN) Cinch Connectivity Solutions, a Bel group company, recently announced the expansion of the Type N Connectors with four straight cabled, crimp type configurations operating to 4 GHz. Type N Connectors are typically used where high power and high-performance requirements are both required. These connectors have a rugged brass construction and nickel finish, intended to support larger, low loss cable types.

 

 

 

PB-48-Allied-EatonPowerXLDM1-400.jpg
| |

Allied Electronics & Automation Now Offering Eaton’s New PowerXL DM1 Micro Variable Frequency Drive

(FORT WORTH, Tex.) Allied Electronics & Automation will soon begin offering Eaton’s new line of PowerXL DM1 micro variable frequency drives (VFD) for purchase online. The VFDs are engineered for today’s demanding commercial and machinery OEM applications. With an energy efficiency algorithm, high short-circuit current rating and robust design, the DM1 offers customers increased efficiency, safety and reliability, and features that improve integration and ease of use.