Product News

icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 
| |

icotek: Expansion of the KEL-DPZ-KX/KL Cable Entry Plate Series 

KEL-DPZ cable entry plates are designed to route and seal a large number cables without connectors, hoses or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space. The KEL-DPZ products are a cost and time saving alternative to traditional cable glands. The KEL-DPZ-KX/KL (IP65) size was created especially for Rittal KL/KX terminal boxes. It was designed for routing up to 72 cables through the pre-cut standard cut-out. The self-tapping screws required for assembly are included in the scope of delivery.

Pilz: PNOZ m ES 16DI PNOZmulti 2 Small Controller Input Module
| |

Pilz: PNOZ m ES 16DI PNOZmulti 2 Small Controller Input Module

Have you selected the appropriate base unit for your application? Various expansion modules can be docked to a PNOZmulti 2 base unit, depending on the requirement: For example: I/O modules, motion monitoring modules and link modules. To monitor pushbuttons and other digital sensors, you can use the input module PNOZ m ES 16DI for standard applications. Configurable in the software tool PNOZmulti Configurator from Version 11.3, 16 digital inputs are available for the connection of pushbuttons and other digital sensors.

AutomationDirect: WAGO ECO2 Series Power Supplies
| | | | |

AutomationDirect: WAGO ECO2 Series Power Supplies

AutomationDirect has recently added WAGO Eco2 series power supplies that offer performance and value, featuring high efficiency and a compact, space-saving design, making them ideal for space-limited applications. These economical power supplies provide reliable performance and long service life for a variety of applications such as industrial automation, building management systems, machine control, and robotics.

Banner Engineering: Q2X Miniature Photoelectric Sensor
| | | |

Banner Engineering: Q2X Miniature Photoelectric Sensor

Banner announces two new modes to the Q2X series of miniature photoelectric sensors: Laser Measurement and the Fixed-Field. The Q2X Laser Measurement sensor’s powerful beam can measure farther with the industry’s longest sensing range for a sensor in a compact housing, while the Q2X Fixed-Field sensor simplifies installation with no configurations or setup required.

Emerson: New PACSystems IPC 2010 Compact PC Built to Connect Industrial Floor to Cloud
| | | |

Emerson: New PACSystems IPC 2010 Compact PC Built to Connect Industrial Floor to Cloud

Emerson has recently announced the new PACSystems IPC 2010 Compact Industrial PC (IPC), a rugged industrial computer designed to handle a wide range of machine and discrete part manufacturing automation applications. The new solution is designed to serve manufacturing sites and OEM machine builders who need a ruggedized, compact, durable IPC to cost-effectively support their Industrial Internet of Things (IIoT) and other digital transformation initiatives.

OKW: MOTEC Compact Desktop/Portable Instrument Enclosures, Now With Sloping Front
| | |

OKW: MOTEC Compact Desktop/Portable Instrument Enclosures, Now With Sloping Front

OKW’s MOTEC desktop/portable electronic instrument enclosures are now available with a sloping front for more ergonomic viewing and operation. MOTEC is ideal for measurement and control, feedback control, peripheral devices and interfaces, switchboxes, modems, laboratory equipment, medical and wellness electronics. These stylish compact enclosures are now available with a sloping plastic control panel (accessory) that is recessed to accommodate a membrane keypad. The alternative is a flat aluminum front/rear panel (accessory).

AutomationDirect: Additional Wera Screwdriving Tools, Wrenches, Tool Sets, and More
| |

AutomationDirect: Additional Wera Screwdriving Tools, Wrenches, Tool Sets, and More

AutomationDirect has added more quality Wera tool choices to their great selection of industrial tools. Wera is a well-known manufacturer of quality, ergonomic, and safety-oriented tools. The new additions include Kraftform Plus standard hex tip screwdrivers and slotted terminal block tools, Kraftform Micro precision screwdrivers, Zyklop Mini ratcheting screwdrivers with internal multi-bit sets, Kraftform Kompakt t-handles, Hex-Plus hex and Torx key sets, and Joker self-adjusting VDE-insulated spanner wrenches.

Banner Engineering: AC Voltage Sensor – Continuously Monitor Voltage to Gain Insights on Plant and Equipment Performance
| | | |

Banner Engineering: AC Voltage Sensor – Continuously Monitor Voltage to Gain Insights on Plant and Equipment Performance

Get a more comprehensive view of equipment and overall plant health while improving the accuracy of power calculations with Banner’s new AC Voltage Sensor. Sensor data is easily accessed via the Modbus RTU interface and is pre-scaled to simplify the commissioning process. Monitoring the power consumption of equipment is further simplified when used with Banner’s Asset Monitoring Gateway with SNAP ID and AC current sensors; together, they provide a turn-key power monitoring solution without any programming necessary to get started. The AC Voltage Sensor also works great within Banner’s Snap Signal condition monitoring ecosystem.

WAGO: 811 Series 811-1316 2-Conductor Fuse Holders
| | |

WAGO: 811 Series 811-1316 2-Conductor Fuse Holders

WAGO’s DIN-Rail mount 811 series fuse holders provide users with maintenance-free, vibration-proof, and corrosion-resistant connection using Class CC & 10 x 38 mm fuses. This new addition has a max voltage of 1,500 V DC, and UL 4248 certified, making it perfect product for high voltage applications seen in motor control, power distribution and the solar industry.

Rockwell Automation: ASEM 6300 Industrial Computers and Monitors Provide Protection and Visibility
| | | | |

Rockwell Automation: ASEM 6300 Industrial Computers and Monitors Provide Protection and Visibility

ASEM 6300 Industrial PCs are available in box and panel form and allow for greater customization. Innovation with FactoryTalk Optix software and seamless deployment to HMI solutions is available withthe ASEM 6300 device that best fits customer needs. ASEM 6300 Industrial PCs are one of the solutions in the new FactoryTalk Optix portfolio. The FactoryTalk Optix portfolio allows users to choose their own technology mix, where for the first time, Rockwell Automation customers can use visualization software to design HMI applications that can natively work with both Rockwell Automation and third-party controllers and display a choice of hardware from either Rockwell Automation or a third-party.

Wieland: SELOS + FASIS DIN Rail Terminal Block Assemblies
| |

Wieland: SELOS + FASIS DIN Rail Terminal Block Assemblies

SELOS + FASIS: Fully built terminal block assemblies with no minimum order quantity – Simplify your purchasing and save valuable time by letting Wieland build your terminal block assembly. Request a quote to get started, and the Wieland application engineering team will contact you, get the details of your project, then start designing it in an e-plan compatible format. Once you approve the design, they get to building. There is no minimum order quantity – whether the batch size is 1 or 1,000, Wieland will deliver the exact quantity you need – starting from just 1 piece.

Beckhoff: C6043 | Ultra-Compact Industrial PC
| |

Beckhoff: C6043 | Ultra-Compact Industrial PC

The C6043 extends the series of ultra-compact industrial PCs to include a high-performance device with a built-in slot for powerful graphics cards. With the latest Intel Core processors and highly parallelizing NVIDIA graphics processors, the PC becomes the perfect central control unit for ultra-sophisticated applications. These include applications with high demands on 3D graphics or deeply integrated Vision and AI program blocks with minimal cycle times. The Beckhoff TwinCAT 3 control software is capable of mapping this as a fully integrated solution – without any additional software or interfaces.

Balluff: BNI IO-Link Sensor/Actuator Hubs
| |

Balluff: BNI IO-Link Sensor/Actuator Hubs

With their rugged housings, Balluff’s BNI IO-Link sensor/actuator hub series are ideal for use in harsh industrial environments. The I/O blocks are based on M12 or M8 plug connections, making them easy and economical to install and maintain. The port-specific single-channel monitoring detects short circuit and overloads, as well as a cable break at the port. This degree of selective diagnosis is unique among I/O blocks. Highest functionality with the best flexibility offers our different variants of BNI IO-Link sensor/actuator hub series. Different units allow you to meet your specific demands and requirements.

IDEC: FC6A MicroSmart PLC
| | | |

IDEC: FC6A MicroSmart PLC

The MicroSmart FC6A series is available in two types of CPUs: Plus and All-in-One. The Plus type has a dual RJ45 Ethernet port, embedded web server functions and the capability to expand up to 2060 I/O, while the All-in-One type has an embedded serial port and RJ45 Ethernet port capable of expanding up to 520 I/O. The next generation IDEC MicroSmart FC6A Plus PLC stretches performance beyond micro PLC limits. With its 2,060 I/O capacity, this PLC can control large machines or entire small-scale manufacturing facilities, providing more capabilities for even the most demanding applications.