Combining industrial hardware connections with the processing power of a Raspberry Pi Compute Module 3+, the BB-400 Industrial Edge Controller gives you the possibilities of open source software. Ideal for retrofitting existing equipment or building into a new panel. The BB-400 Industrial Edge Controller combines Brainboxes proven IO and serial connectivity with a range of…
The Panelicity®Series 36 is a 1/2 DIN panel controller from Classic Automation. This powerful controller in a small package features four different pre-defined operator displays, alarms, trends, and standard industrial control strategy templates. It simplifies new installations and provides a migration path for upgrades of older, obsolete panel controllers. In addition to the Moore 352/353 and…
EXAIR’s new 316 Stainless Steel ATEX Cabinet Cooler Systems are the latest solution for protecting sensitive electronics in ATEX classified areas. This low cost and reliable product is UL tested, CE compliant, and meets the stringent requirements for use upon classified purged and pressurized electrical enclosures within Zones 2 and 22. With cooling capacities up to 5,600 Btu/Hr., it’s an ideal answer for protecting electrical enclosures with problematic overheating in areas with explosive atmospheres, both indoors and outdoors.
Dwyer is proud to announce the release of the industrial differential pressure transmitter, Series IDPT. These transmitters feature a rugged housing and highly stable accuracy for a long service life in most industrial applications, including: semiconductor, pharmaceutical, laboratories, fume hoods, HVAC pressure, critical measurement, and high purity. The industrial differential pressure transmitter, Series IDPT, supports accuracies of either 0.25% or 0.50% in either unidirectional or bidirectional ranges.
LUTZE is expanding its DRIVEFLEX VFD cable offering to include a 2kV option for the most electrically demanding applications. The new A219 series expands upon the existing A220 1kV series, offering improved electrical values for 2kV applications. Like all DRIVEFLEX cables the new A219 series was designed with flexibility in mind. With a 7.5 OD bending radius, the flexible design of the A219 series saves time and money during installation by improving ease of stripping and handling. The 3 symmetrical ground design reduces stray currents in the motor shaft and bearings, extending the lifetime of the motor.
Introducing the KBH holder from icotek. Hook-and-loop tape holders serve as holders for hook-and-loop cable ties, which can be mounted quickly and easily in a variety of ways. These holders can be used in combination with hook-and-loop cable ties KLKB and hook-and-loop tape KLB. The KBH can be installed very quickly: the KBH-R with a 90° twist lock on profiles from Bosch Rexroth, MiniTec, item, MayTec, 80/20 and Rittal and the KBH-S with universal screw installation. There are also self-adhesive versions (KBH-KS) as well as versions for mounting on C-rails and top hat rails.
New space-saving RAILTEC B flat-top enclosures feature closed connection sides and a generously dimensioned control panel for displays, operating elements and interfaces. These new enclosures are ideal for universal applications such as installation housings and individual rail mounted electronics equipment. Typical applications will include remote meters for condition monitoring, smart meters for electricity measurement, technical equipment for building automation, smart home systems and much more.
Introducing the E3X-ZV and E3X-MZV Series – In today’s fast-paced industrial landscape, efficiency and reliability are paramount. Manufacturers are constantly seeking innovative solutions to optimize their processes and minimize downtime. OMRON has recently unveiled its latest Fiber Optic Amplifier which addresses critical market problems, and improves the way industrial sensing is approached. This article will delve into the big picture impact of this product release, focusing on the solutions it offers and the effects it can have on various industries.
The AX8820 universal regenerative unit is used to feed regenerative energy back into the supply grid. It is compatible with the AX8000 multi-axis servo system, AX5000 digital compact servo drives, and third-party devices. Sinusoidal energy recovery prevents the typical network distortions seen with block-shaped recovery. For effective energy management, the regenerative energy is initially stored in the DC link. The recovery into the supply network does not begin until shortly before the overvoltage threshold of the connected devices is reached.
Industrial electronic enclosures manufacturer ROLEC now offers two premium ranges of IP-rated plastic housings – technoPLUS and technoDISC. Pole-mountable technoPLUS is ideal for outdoor locations, IIoT, measurement and hubs, while technoDISC is perfect for instrumentation, measurement and marine electronics. (Its distinctive round styling suits settings such as pipework.) Both ranges offer ‘lid closed’ installation to protect the seal and electronics in harsh environments. The lid is recessed to accommodate a membrane keypad, front plate or product label.
May 2, 2024 As the demand for safe and efficient power solutions for equipment grows, Schurter is committed to addressing the impact of power loss as it relates to Power Entry Modules (PEMs). This new White Paper emphasizes the necessity of carefully addressing power dissipation and temperature deratings for all PEM related components to ensure…
Pfannenberg launches the PA1-R and PA L1-R, the ultimate signaling solutions for light duty applications. These products deliver high performance in an economical package, ensuring a safe and reliable signaling solution for audible (PA1-R) and combined audible, visual (PA L1-R) needs. The PA 1-R and the PA L1-R are the go-to choice for automation, material handling, and machine building applications where status and indication lights and sounds are critical safety measures needed to notify staff about current or imminent events.
If different electrical components are combined in an appliance inlet to form a power entry module, the individual power losses and temperature deratings of all components involved must be carefully taken into account in order to ensure long-term safe operation. Power entry modules (PEMs) consist of a combination of different components for the safe power supply of devices. In addition to the IEC appliance inlet connector, mains switches, fuseholders or circuit breakers and filters can be integrated.
AutomationDirect had added more Stego enclosure heaters to their Enclosure Thermal Management lineup. These new 120-240 VAC/VDC enclosure heaters include small, flat versions that distribute heat evenly within compact enclosures and are available with 8W or 10W heating capacities. Also added are compact loop heaters that feature a patented loop body design for increased natural convection airflow, reduced thermal stress on the heater, and better heat transfer.
The S4B Series Heavy-Duty Type 4 Safety Light Curtains add cascading functionality, simplifying installation by reducing wiring while the auto cascade feature automatically recognizes connected curtains. Specially designed color-coded cordsets minimize the risk of installation errors and allow easy replacement if a component is damaged. Two resolution options, 14-millimeter and 30-millimeter, along with fast response times, deliver greater protection against safety hazards.
The EG24 is a retroreflective edge measurement sensor designed for fast measurement. Its resolution of less than 10 microns precisely detects the position of materials while the 2 kHz measurement frequency rapidly measures those positions. Together, this combination of high precision and quick response maximizes process control, improves downstream yield, and minimizes waste.
