The MINI-DATA-BOX will convince you with its compact size and attention to detail. It is suitable for a variety of indoor and outdoor applications. Designer corners play gently with the light on the surface and lend the enclosure a new lightness.
Now available and designed for aerial, pedestal, and underground (handhole, manhole) environments, the new line includes three enclosures (144-, 288-, and 576-fiber) and two splice trays (24- and 72-fiber). “Designed for the outside plant network, the HyperDropFOSC series is a proven fiber management enclosure with a reliable sealing system,” explained Charles Hoskins, V.P. of Product Development. “Cable seals employ heat-shrink sleeves and hot-melt adhesive installed with a hot-air gun.”
The new 14-strong flame-retardant ABS IP54 1556 family, rated UL94-V0, is inspired by Hammond Manufacturing’s recently launched IP68 polycarbonate 1557 series. It follows the same modern rounded corners and top face styling and introduces rectangular versions to complement the square format versions derived from the 1557 series. IP54 sealed for general purpose indoor use, the ABS material gives a lower price point than the polycarbonate used in the 1557, which is designed for installation outdoors and in aggressive environments.
Polycase is excited to announce the extension of the WQ Series with the addition of a new size, the WQ-51. This new size measures 10.24 x 6.30 x 5.12 inches and is UL & cUL Listed (file no. E194432), NEMA 4X rated, and designed for outdoor applications. The WQ Series is known for its durability, and the WQ-51 is no exception. It features a fiberglass-reinforced polycarbonate base and polycarbonate cover (available in clear or gray), with stainless steel latches and a continuous gasket that meets IP65, IP66, and IP67 specifications.
OKW has recently launched robust new SOLID-BOX plastic enclosures for desktop and wall-mount electronics in challenging industrial and outdoor locations. With IK 08 impact protection, these IP 66/IP 67 sealed enclosures are ideal for a wide range of applications including plant and machine construction, HVAC, IoT/IIoT, smart factory/Industry 4.0, gateways, data loggers, ICT, electrical installations, measurement and control, agriculture and farming, sensor systems and safety engineering.
Introducing the ESP Series Eclipse Swing Panel from Hammond Manufacturing, a hinged panel which allows access to internally mounted equipment and can be hinged from either side. The ESP Series panel is made of 12 gauge steel construction, and comes equipped with slotted quarter turn latches to provide closure, and can even convert into a dead front panel by adding optional locking quarter turn latches (part number EQTRL). This panel also comes complete with 4 depth adjustment brackets.
Deep-Hinged Window Kits provide protection, visibility and easy access to displays, equipment and components installed behind the viewing area. Window kits are conveniently sized to allow direct mounting in the usable door area of any enclosure with a suitably sized mounting surface.
Due to overwhelming product demand, Fibox Enclosures has added three new sizes to the ARCA-IEC series!
Driven by innovation and market demand. The ARCA -IEC is the ideal and cost-effective alternative to stainless steel NEMA cabinets or fiberglass enclosures. These NEMA 4X hinged electrical enclosures are a real game-changer. WIth three new sizes offering you more solutions, the ARCA-IEC is the first choice for today’s manufacturers.
Introducing the 1418 N4 AL Series Type 4X aluminum wallmount enclosures from Hammond Manufacturing, designed for use as instrument enclosures, electric, hydraulic and pneumatic control housings, electrical junction boxes and terminal wiring enclosures. These enclosures provide protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion may be a problem.
Diecast aluminium enclosures are much better at dealing with radio frequency interference (RFI) and electromagnetic interference (EMI) than their plastic counterparts. Aluminium enclosures can provide some degree of inherent RFI/EMI shielding due to the conductive properties of the metal. But RFI/EMI can still affect the equipment. The shielding effectiveness of a metal enclosure depends on various factors.
Discover IBOCO DINFIX Mounting Clips. Dinfix mounting clips permit the smooth mounting of metal rails on the G1 mounting rail, thus allowing the construction of supporting frames for switchgear and wiring duct. What’s more, this product offers the possibility of installing onto the parallel rail G1, switchgear of a certain size and weight that are not predisposed for snap-on assembly on Omega 3/3A/3B. Once they are mounted, the Dinfix form a strong mounting plane at the level of the upper flange of the rail G1.
Introducing the 1590Z series Type 4X/6P diecast aluminum enclosures from Hammond Manufacturing. These rugged electronic instrument enclosures are made of a diecast aluminum alloy (tough, yet easy to machine), and feature a two piece “tongue and groove” construction with a replaceable one-piece silicone rubber gasket which provides protection against access of dust and water. The gasket supplied is loose inside the enclosure, not pre-installed, and has a temperature rating of -40C to +150C.
Designed to meet the needs of the most demanding environments, the LX platform has over 750 cable management, mounting, and airflow accessories. From Core to Edge and Multi-Cloud data centers, the LX provides a scalable, custom foundation to build your server, network, storage, or converged infrastructure. Benefits include a flexible number of accessories and configurations, and an efficient tool-less feature.
OKW has added a new slimline S size to its CONNECT range of handheld plastic enclosures for wired electronics. Versatile CONNECT is ideal for data systems engineering, networks, building services technology, safety engineering, IoT/ IIoT sensors, medical devices, measurement and control. CONNECT enclosures comprise two sections – one flat and recessed for a membrane keypad, the other curved and tactile. Rounded corners add further ergonomic comfort.
Introducing the C3SC Series Type 3/12/4 mild steel junction box, which is designed for use as a wiring box, junction box, terminal or pull box in indoor or outdoor applications where subject to windblown dust or rain. The standards that the junction box series complies with include UL 508A, cULus per CSA C22.2 No 94 and NEMA – all type 3, 4 and 12 -and IEC 60526, IP66.
ROLEC’s advanced HMI enclosures now include multiPANEL, profiPANEL and profiPANEL STANDARD – giving industrial electronics designers more choice. Elegant multiPANEL is best suited to small-volume applications requiring advanced functionality and cutting-edge aesthetics. Versatile profiPANEL is for higher-volume applications, notably machine building. Both models enable virtually borderless, flush-fit installation of a front plate or glass. They are manufactured from aluminum profiles, enabling the specification of custom sizes from 5.91” x 5.91” to 31.50” x 31.50”.
