AutomationDirect has added new cable entry system options to their Murrplastik product line. Murrplastik cable entry systems easily allow installation of non-terminated or pre-made /terminated cables through an enclosure or other bulkhead surface.
Automotive- and industrial-grade board-to-board conenctor offers a reliable, repeatable and versatile solution that can be scaled up in line with specific customer requirements.
AutomationDirect has added new LUTZE DRIVEFLEX and MOTIONFLEX variable frequency drive cables which provide supreme protection against electromagnetic interference (EMI). These cables are available in 18 to 8 AWG sizes and include four black conductors with a green/yellow ground conductor of the same gauge. Each conductor is labeled for easy identification and is covered in a cross-linked Polyethylene (XLPE) insulation (type XHHW-2).
The ix Industrial in-line jack connector enables manufacturers of PROFINET-compliant devices to create smaller, more compact end devices while simplifying the mounting and wiring of equipment.
Mitsubishi Electric Automation, Inc. has recently announced the release of the NZ2FT Series slice distributed I/O solution. NZ2FT Series is a modular distributed I/O system that operates currently as a remote station for EtherNet/IP, Profibus DP, and Modbus TCP device-level networks. It offers a scalable architecture that accepts a wide range of mix-and-match I/O configurations.
LEMO is thrilled to announce the expansion of its field-proven High-speed data transfer portfolio with the release of USB 3.1 and Single Pair Ethernet connectors, available as of November 15th, 2022. LEMO is completing its existing USB 2.0 compliant portfolio with a new range of USB 3.1 connectors providing data transfer speed up to 10 Gb/s. LEMO is also extending its Ethernet compliant portfolio that includes 1000 Base-T4 & 10G Base-T4 compliant solutions.
Mouser Electronics, Inc. is now stocking M12 rail value version connectors from TE Connectivity. TE’s M12 rail value version connectors are a cost-effective series of M12 connectors, including A-coded 8-position and D-coded 4-position male and female options. These connectors comply with rail application standards (EN 45545 and IEC 61373), and the shielding design enables signal and high-speed data transmission in harsh environments.
Würth Elektronik expands its WR-TBL range of terminal block connectors following the wire-protection principle and in the 10-mm pitch.
binder develops robust and economical connectivity solutions for use in Single-Pair Ethernet (SPE). The miniaturized industrial connectors of the 808 series are equipped with screw locking. They support the transmission of data and electrical power in future-proof automation solutions according to the SPE standard. Thanks to the established and compact M8 design, the connectors can be beneficially integrated into standard sensor technology housings.
PCB terminal block with lever technology from WAGO allows quick and easy wiring for cross-sections from 26 to 14 AWG.
On June 29, 2021, the PROFINET User Organization (PNO) published the PROFINET Cabling and Interconnection Technology – Guideline for PROFINET Version 5.0 , a new set of rules for PROFINET-compliant cabling in industrial equipment, systems, and plants. The ix Industrial mating face for Ethernet transmission represents a key new component in the SPC “Specific Passive Components” section.
AutomationDirect has added more control and signal cables from Quabbin. These signal cables are available in shielded or unshielded versions, with conductor sizes from 24AWG to 16AWG, and with various conductor counts ranging from 2 to 25 conductors depending on cable size. Twisted pair or twisted triad options are also available. Individual conductors are stranded tinned copper with color-coded insulation for easy identification; all cables include a PVC chrome gray jacket.
A multi-fibre push on (MPO) TV connector released by Amphenol Socapex brings robust performance and high density capability for optical links in harsh environments.
CUI Devices’ Interconnect Group recently announced the addition of M8 connector types to its line of circular connectors. The CDM8 family offers a range of male or female jack versions with contact position options of 3, 4, 5, 6, or 8 pins. These M8 connectors are A coded to support 1 Gbit Ethernet or B coded for Profibus, while carrying IP67 ratings to deal with harsh environments found in industrial and factory automation applications.
The Sunclix connectors with crimp connection for automated assembly processes from Phoenix Contact enable the easy and reliable cabling of photovoltaic panels. The device connector with Unlock system is a new addition. This allows the connector to be conveniently unlocked without using a special tool and is particularly suitable for cabling inverters and string combiner boxes.
Now available from Mouser, Weidmuller Klippon® Connect AITB Terminal Blocks and Accessories are meet the specific requirements and safety regulations for wiring in building installations.
