Connectors / Cables / Terminal Blocks

binder: 570 Series Easy Locking Cable Connector
| |

binder: 570 Series Easy Locking Cable Connector

binder announces the 570 Series Easy Locking Connector (ELC) for medical applications. Reliable function, safety in use, biocompatibility, and patient protection are key criteria in medical device engineering. Technical malfunctions, unstable parameters, incorrect use by medical staff or patients may cause serious complications here. In this environment, connectors are subject to the highest demands in terms of contact reliability and signal integrity, resilience of connection, and simple as well as intuitive usability. In addition, biocompatibility and a protection degree appropriate for medical devices, including protection against contact and resistance to cleaning agents or disinfectants, are mandatory.

Fischer Connectors: Single Pair Ethernet and USB 3.2 Protocols Enhance IIoT Connectivity with Ultra-Rugged Solutions
| |

Fischer Connectors: Single Pair Ethernet and USB 3.2 Protocols Enhance IIoT Connectivity with Ultra-Rugged Solutions

With the increase in sensor density, actuators and controllers in Industry 4.0 and IIoT operational settings, high power levels and massive amounts of data must be securely and efficiently managed through ultra-fast transmission lines with cables running over long distances. Miniature connectors and cables are needed to interconnect smaller and smaller devices and sensors in areas that are sometimes confined and hard to access. And connectivity must be ruggedized to resist shock, vibration, extreme temperatures, water and corrosion when exposed to demanding environmental and chemical conditions, both indoors and outdoors.

Icotek: TE Thread Extension for Cable Glands and Cable Entry Plates, M32 / M50
| | |

Icotek: TE Thread Extension for Cable Glands and Cable Entry Plates, M32 / M50

The icotek cable glands and cable entry plates with metric thread are screwed with a locknut during assembly. If the thread lengths are not sufficient, for example when mounting on sandwich panels or thick concrete walls, icotek offers a practical solution: the icotek TE thread extension. The icotek TE thread extension is available in two sizes (M32, M50) and in three lengths (35 mm, 60 mm, 120 mm) and represents a real innovation in the field of cable management. The different lengths can be flexibly combined or shortened at the designated points.

AutomationDirect: Atlas 300V Type AWM Wire
| |

AutomationDirect: Atlas 300V Type AWM Wire

AutomationDirect has added 300V Atlas Type AWM (appliance wire material) wire that is commonly used for appliance wiring, control cabinets, and machine tool applications. This new wire meets the National Electrical Code (NEC) and NFPA Standard 79 requirements and is made in the USA. Atlas Type AWM wire consist of a tinned copper single conductor covered with a colored polyvinyl chloride (PVC) outer jacket and is available in sizes ranging from 26AWG to 16AWG.

X2X+
| |

B&R Automation: X2X+ Backplane Bus – Four Times More Performance

B&R now offers the X2X+ backplane bus as an option, increasing the performance of the X20 system by a factor of four. And because all existing X20 I/O modules are already compatible with X2X+, all it takes to build more powerful machines are bus modules. The advantages of this new bus are particularly apparent in applications that involve many I/O modules or high data volume but where short cycle times are imperative.

binder: M12 Connectors with Comprehensive Corrosion Protection
| | | | |

binder: M12 Connectors with Comprehensive Corrosion Protection

binder offers M5, M8, and M12 products for sensor cabling that feature threaded locking rings – and other design parts – made of stainless steel. Unlike conventional connectors, with nickel-plated locking rings and housing parts made of die-cast zinc or brass, they are suitable for use under conditions that explicitly require media resistance. Connectors in stainless-steel design withstand corrosive environmental influences, such as contact with chemicals or aggressive detergents.

WAGO: POWER CAGE CLAMP Terminal Blocks
| | | | | | |

WAGO: POWER CAGE CLAMP Terminal Blocks

The POWER CAGE CLAMP provides the proper clamping force for conductors up to 35, 50, 95 and 185 mm2 (2, 2/0, 4/0 AWG and 350 kcmil). WAGO’s high-current, rail-mount terminal blocks are ideal for energy-intensive applications in machinery and equipment manufacturing, as well as energy production. These terminal blocks are also approved for Ex e applications.

IDEC BTBH-H
| |

IDEC: BTBH-H easy-stack Terminal Blocks Provide Flexible Wire Termination Option

IDEC Corporation announces the new BTBH-H easy-stack product line of surface mount terminal blocks in a compact form factor with multiple amp ratings. These terminal blocks can be easily stacked together or ordered preassembled to meet the needs of any commercial or industrial application. BTBH-H blocks are available in four different amp ratings—10A, 15A, 30A, and 50A—and can be ordered as individual components, or as complete assemblies by amp rating for 2 to 30 poles.

AutomationDirect: 10Gbps Cat6a Ethernet Cables from Murrelektronik
| |

AutomationDirect: 10Gbps Cat6a Ethernet Cables from Murrelektronik

AutomationDirect now offers Cat6a industrial Ethernet cables from Murrelektronik. These shielded cables include an M12 X-coded connection on one end and an RJ45 connection on the other. The X-coded designation is commonly used with industrial vision systems. These high-flex industrial Ethernet cables are available in lengths up to 5m with transmission speed capability up to 10Gbps. These cables have a TPE (thermoplastic elastomer) jacket that is flame-retardant and chemical resistant.

LAPP Launches SKINTOP MINI Small-Diameter Cable Glands at ATX West 2023
| | | |

LAPP Launches SKINTOP MINI Small-Diameter Cable Glands at ATX West 2023

The extended SKINTOP MINI range includes two- to seven-millimeter diameter glands, allowing system designers to obtain protective, secure seals for their small-diameter cables while reducing cable density in their networked devices. LAPP’s SKINTOP MINI cable glands are ideal for the medical device, pharmaceutical and automotive manufacturing industries.

Siemens: The SIRIUS Modular System
| |

Siemens: The SIRIUS Modular System

The SIRIUS modular system with its components for the switching, starting, protection and monitoring of motors and industrial systems stands for the fast, flexible and space-saving construction of control cabinets. The SIRIUS modular system in sizes S00 to S3 up to 55 kW/400 V (AC-3: 110 A) has been completely revised with respect to both the main and the control circuits.

Weidmuller: PLC 5 Migration Adapter
| |

Weidmuller: PLC 5 Migration Adapter

Weidmüller’s universal conversion/migration platform will substantially reduce the time and expense of updating your legacy systems to any new PLC or DCS system. With increasing plant complexity, the obsolescence of certain PLCs and the relentless growth in demand for I /O signlas, many installations or plants are having to replace existing controllers with new ones, without modifying existing field cabling.

HELUKABEL: HELUTHERM 145 UL/CSA 600V
| | | |

HELUKABEL: HELUTHERM 145 UL/CSA 600V

Introducing the HELUTHERM 145 UL/CSA 600V wire cable, with temperature resistant single core for the internal wiring of lighting fixtures, heaters, electrical machinery, switching systems and distributors in industrial equipment as well as plant and machinery construction; suitable for laying in tubes, on and under plaster as well as closed installation ducts. Not suitable for direct laying in cable ladders and cable trays.

Allied Electronics & Automation Offers Phoenix Contact’s New XTV Terminal Blocks With Push-X Direct Connection Technology
| | |

Allied Electronics & Automation Offers Phoenix Contact’s New XTV Terminal Blocks With Push-X Direct Connection Technology

Allied Electronics & Automation is proud to offer Phoenix Contact’s new XTV terminal blocks with Push-X connection technology. The new XTV terminal blocks are the first products on the market to incorporate Phoenix Contact’s breakthrough Push-X direct connection technology, which enables easy, flexible, and virtually tool-free wiring and rewiring with minimal force, reduces installation times for all conductor types and cross sections, and paves the way for automated wiring.

WAGO: Inline Splicing Connector With Lever
| |

WAGO: Inline Splicing Connector With Lever

Introducing a new inline splicing connector with lever from WAGO that is easy to use – you just pull the lever up, insert a conductor and push the lever back down, allowing you to easily terminate conductors from 20 to 12 AWG. These splicing connectors allow for tool-free connection and disconnection thanks to convenient lever technology. You can choose between fixed-position installation and multi-pole installation with an adapter, and will be able to connect solid, stranded and fine-stranded conductors together.