As manufacturing processes become more integrated, the need for higher bandwidth and faster transmission of data is increasing. Improving production output and efficiency depends on industrial communication to connect the platform to manufacturing operations, and to provide data links within an industrial infrastructure. Industrial Ethernet (IE) cables can provide the data speeds that enable manufacturing networks to run at optimum levels.
binder has announced an M16 X – coded connector capable of handling the data speeds demanded by today’s sensor-based automated production facilities. Data transmission figures are an impressive 10Gbits/s. With the benefits of rugged design and excellent environmental resistance, M16 connectors have become widely used for sensors for both indoor and outdoor use where there is a need for a higher pin count than is offered by M8 and M12 connectors.
Industrial automation manufacturer and industrial internet of things (IIoT) developer Opto 22 recently announced groov RIO, a family of intelligent, distributed input/output (I/O) for IIoT and automation applications. groov RIO represents a first-in-class solution for its ability to quickly connect traditional wired switches and sensors directly to Ethernet networks, software applications, and cloud platforms without intermediary control or communication hardware, such as PLCs, PACs, or PCs.
The angle adapter is used if components and bars are installed in difficult-to-access parts of the control cabinet and facilitates the wiring of terminals in the lower and upper area of the cabinet. Thanks to the angle adapter, devices and hat rails can be tilted forward easily and therefore guarantee improved visibility and access to the terminals.
The new bus couplers by LÜTZE not only operate the electronic LCOS load monitoring, but also the LOCC-Box Net components that have been successful for many years. PROFINET-IO, EtherCAT and Ethernet IP are available as compatible bus interfaces. Remote diagnosis via TCP/IP is possible round the clock via a separate Ethernet interface.
AS-Interface helps you achieve many different types of motor control applications. The advantages of ASi are particularly evident in conveyor applications: reduced wiring, easy installation, high flexibility and low costs. Bihl+Wiedemann is now extending its wide range of drive solutions – with the ASi motor module for Interroll EC5000 AI.
Binder USA, has extended its Series 770 NCC product line with the introduction of a female panel-mount connector. The connector is mounted from the back side of the panel and is IP67-sealed when unmated.
Since its release in 2017, the ix Industrial™ has been used in a variety of industrial markets such as factory automation, robotics and machine vision. By working together with key interconnect technology partners, the ix Industrial connector continues to meet the demands of Industry 4.0 Ethernet connectivity.
LÜTZE has launched new edge protection for its AirSTREAM and AirSTREAM Compact wiring systems. Positioned on the RG 035 rail module, the edge protection ensures higher level of safety when mounting and operating control cabinets.
Balluff’s line of connectivity solutions complements entire line of Balluff’s automation components portfolio and more. Our connectivity portfolio assures reliable operations that everyone has come to expect from Balluff with over 90 years of automation experience. Our solutions are tailored to wide variety of industries and applications including welding, stamping, food, and automation. Many combinations of solutions are available and are presented below to facilitate connectivity designs.
Roxtec HD transits are designed for applications with high cable density and high demands. One cut-out for a Roxtec HD (high density) transit can accommodate up to 41 armored or non-armored cables, drastically reducing the amount of space required when compared to 41 cable glands. Use them in terminal boxes, cabinets, enclosures and remote I/O panels to improve space efficiency and cost-effectiveness.
With the LFC cable shield clamp the cable shield is directly contacted at the C-rail. Your existing cable clamp can still be used for strain relief. The shield clamps SKL / MSKL are easy to use and effective in earthing single cable shields.
Rittalnow offers a special adapter that retrofits comprehensive communications capabilities to ensure that customers can integrate existing Blue e cooling units intocondition monitoring and IoT systems. Smart manufacturing is driven by the rise of technology; digital retrofit may be the most economical solution when a company’s equipment lacks adequate communication capabilities.
The SDS-3008 smart Ethernet switch is the ideal product for IA engineers and automation machine builders to make their networks compatible with the vision of Industry 4.0. By breathing life into machines and control cabinets, the smart switch simplifies daily tasks with its easy configuration and easy installation. In addition, it is monitorable and is easy to maintain throughout the entire product life cycle.
Multi-conductor flexible control cable from AutomationDirect is now available in 20 AWG unshielded models with 3 to 25 conductors including ground. Existing gauge sizes are available from 18 AWG to 10 AWG with 3 to 41 unshielded or shielded conductors including ground wire.
Ready for compact installations, a new model completes WAGO’s series of current transformers with voltage taps. In addition to the 50 mm2 (1/0 AWG) and 95 mm2 (4/0 AWG) versions, a current transformer with voltage tap for WAGO’s 185 mm2 (350 kcmil) through terminal block is now also available, making it perfect for measuring energy in small spaces.
