Connectors / Cables / Terminal Blocks

TE Connectivity Adds XRC, SRC and ML-XT Connectors and XRC Terminals to Portfolio

TE Connectivity Adds XRC, SRC and ML-XT Connectors and XRC Terminals to Portfolio

TE Connectivity has added Extra Rugged Circular connectors (XRC), Sealed Rectangular Connectors (SRC), ML-XT connectors, and XRC terminals to its portfolio of connectivity solutions. The connector products, which were formerly produced by Molex, are perfect for harsh environment applications.

 

 

 

BECKHOFF: EP6090-0000 – Display Box With Navigation Switch and Operating Hours Counter

BECKHOFF: EP6090-0000 – Display Box With Navigation Switch and Operating Hours Counter

The EP6090-0000 display box has an illuminated, low-reflection LC display with two lines of 16 characters. It can be used, for example, for displaying status messages or diagnostic information. A non-resettable operating hours counter is integrated and can be displayed and also read out via the controller.

 

 

 

Moxa: Go Small with Big Gains

Moxa: Go Small with Big Gains

Moxa has recently unveiled the EDS-2000-EL, with extra small switches to free up valuable space inside your machines and cabinets, allowing you to accomodate more devices for growing network demands. The EDS-2000-EL switches allow you to enhance data flow efficiency simply by flipping the DIP switches to enable QoS and BSP, which reduces the chances of data loss and increased operating costs for your applications.

 

 

 

Save Plenty of Money on Wiring by Using ASi Profile Cables

Save Plenty of Money on Wiring by Using ASi Profile Cables

Do you want to significantly reduce your wiring costs? Then use our ASi solutions and the 2-core ASi cable, which transmits power and data simultaneously. The cost advantage over round cable solutions with conventional M12 or 7/8″ connectors can be as high as 68 percent, check out more details on our cost comparison.

 

 

 

Cat5e Industrial Ethernet Cable from AutomationDirect

Cat5e Industrial Ethernet Cable from AutomationDirect

Quabbin DataMax Extreme Industrial Ethernet cable jackets were developed to survive the many industrial hazards that commercial jackets will not. Quabbin Cat5e Industrial Ethernet cable has a UL PLTC rating allowing it to be installed in a cable tray without the need for conduit. With its 22 AWG conductors it works well in power over Ethernet (POE) applications.

 

 

 

Durability And Ruggedness Of Expanded Beam Optics Using Springless Mating And Crimpless Cable Retention

Durability And Ruggedness Of Expanded Beam Optics Using Springless Mating And Crimpless Cable Retention

TE Connectivity (TE) is releasing its EB16 expanded beam optical pin and socket termini in new single mode and multimode variations. Both variations are based on an updated design that includes springless mating and crimpless cable retention. EB16 termini are built on TE’s PRO BEAM expanded beam connector technology, which expands and collimates the optical signal into a beam size well beyond its original size to help provide easier optical alignment, low sensitivity to contamination and consistent performance over thermal changes.

 

 

 

AutomationDirect Adds VNTC Tray Cable

AutomationDirect Adds VNTC Tray Cable

VNTC (Vinyl Nylon Tray Cable) 600 Volt Type TC-ER control cables from AutomationDirect are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial and where superior electrical properties are desired. VNTC cable is available in 18 AWG to 10 AWG with 3 to 24 unshielded copper conductors. Cables are cut to length in 1-foot increments with a 20-foot minimum.

 

 

 

WAGO PCB Terminal Blocks for Power Electronics

WAGO PCB Terminal Blocks for Power Electronics

WAGO has expanded its line of PCB terminal blocks to help engineers address the trend of electronic miniaturization, which requires that both power and signal levels be integrated onto PCBs. This trend has changed connection technology requirements by increasing power density. leading WAGO to offer its 2606 and 2626 Series PCB Terminal Blocks with 12.5 mm (0.492″) pin spacing. Additionally, its 2616 and 2636 Series PCB Terminal Blocks are now available with 15 mm (0.59″) pin spacing.

 

 

 

ifm: Male Cordsets for Industrial Automation

ifm: Male Cordsets for Industrial Automation

Cable plugs are frequently used for connecting sensors and actuators with connection terminals to splitter boxes or modules in automation technology. Even when fastened by hand, a perfect lasting seal of splitter and module connections is guaranteed. They offer high protection against moisture ingress and high material resistance to aggressive liquids.

 

 

 

Phoenix Contact: Unshielded Board-To-Board Connectors

Phoenix Contact: Unshielded Board-To-Board Connectors

Phoenix Contact’s FINEPITCH board-to-board connector series now includes unshielded options in a 0.8-mm pitch. The unshielded version gives design engineers more flexibility in applications without EMI concerns. The FINEPITCH series comes in multiple orientations, stack heights, and number of positions. The variety of connection options makes it easier to position PCBs at the appropriate angles and distances from each other, even in very compact devices.