Connectors / Cables / Terminal Blocks

Weidmuller’s D SERIES DRI/DRM Relays

Weidmuller’s D SERIES DRI/DRM Relays

Weidmuller Inc.’s D-SERIES offers economical relays for the separation of input and output signals in industrial automation. The D-SERIES is designed for industrial applications with a wide range of relay pinning types. With up to 28 connection points per socket, they have a considerable influence on the wiring time during installation. Weidmueller’s D-Series sockets with PUSH IN terminals significantly reduce the wiring time- up to 75%.

 

 

 

PSSuniversal 2 – I/O Modules for Your Remote I/O System

PSSuniversal 2 – I/O Modules for Your Remote I/O System

A selection of I/O modules for safety-related and non-safety-related digital signal processing is available for the remote I/O system PSSuniversal 2. You can configure the system to fit your requirements, with a flexible mix of safety and standard functions. With PSSuniversal 2 it is very simple to adapt the system retrospectively. The configuration is performed in our software tool PASconfig.

 

 

 

Pilz Expands Remote I/O System PSSuniversal 2 – for More Openness in the Periphery

Pilz Expands Remote I/O System PSSuniversal 2 – for More Openness in the Periphery

Pilz expands its remote I/O system PSSuniversal 2 by a head module with EtherNet/IP interface. This means that PSSuniversal 2 offers the necessary openness for smooth communication in various control environments on an Ethernet basis. In the remote I/O system PSSuniversal 2 there is already a head module available with PROFINET PROFIsafe interface, in addition to the new EtherNet/IP head module with CIP safety.

 

 

 

HARTING: Innovative Push Pull Standard for M12 Connectors – Across Manufacturers

HARTING: Innovative Push Pull Standard for M12 Connectors – Across Manufacturers

Eight well-known manufacturers established on the market for M12 connectors ­– Phoenix Contact, HARTING, Molex, Murrelektronik, Binder, CONEC, ESCHA and Weidmüller – have come together to establish a standard for the push-pull locking mechanism of M12 connectors on the market. Together, we are pursuing the one goal of ensuring compatibility across manufacturers.

 

 

 

TE Connectivity Adds XRC, SRC and ML-XT Connectors and XRC Terminals to Portfolio

TE Connectivity Adds XRC, SRC and ML-XT Connectors and XRC Terminals to Portfolio

TE Connectivity has added Extra Rugged Circular connectors (XRC), Sealed Rectangular Connectors (SRC), ML-XT connectors, and XRC terminals to its portfolio of connectivity solutions. The connector products, which were formerly produced by Molex, are perfect for harsh environment applications.

 

 

 

BECKHOFF: EP6090-0000 – Display Box With Navigation Switch and Operating Hours Counter

BECKHOFF: EP6090-0000 – Display Box With Navigation Switch and Operating Hours Counter

The EP6090-0000 display box has an illuminated, low-reflection LC display with two lines of 16 characters. It can be used, for example, for displaying status messages or diagnostic information. A non-resettable operating hours counter is integrated and can be displayed and also read out via the controller.

 

 

 

Moxa: Go Small with Big Gains

Moxa: Go Small with Big Gains

Moxa has recently unveiled the EDS-2000-EL, with extra small switches to free up valuable space inside your machines and cabinets, allowing you to accomodate more devices for growing network demands. The EDS-2000-EL switches allow you to enhance data flow efficiency simply by flipping the DIP switches to enable QoS and BSP, which reduces the chances of data loss and increased operating costs for your applications.

 

 

 

Save Plenty of Money on Wiring by Using ASi Profile Cables

Save Plenty of Money on Wiring by Using ASi Profile Cables

Do you want to significantly reduce your wiring costs? Then use our ASi solutions and the 2-core ASi cable, which transmits power and data simultaneously. The cost advantage over round cable solutions with conventional M12 or 7/8″ connectors can be as high as 68 percent, check out more details on our cost comparison.

 

 

 

Cat5e Industrial Ethernet Cable from AutomationDirect

Cat5e Industrial Ethernet Cable from AutomationDirect

Quabbin DataMax Extreme Industrial Ethernet cable jackets were developed to survive the many industrial hazards that commercial jackets will not. Quabbin Cat5e Industrial Ethernet cable has a UL PLTC rating allowing it to be installed in a cable tray without the need for conduit. With its 22 AWG conductors it works well in power over Ethernet (POE) applications.

 

 

 

Durability And Ruggedness Of Expanded Beam Optics Using Springless Mating And Crimpless Cable Retention

Durability And Ruggedness Of Expanded Beam Optics Using Springless Mating And Crimpless Cable Retention

TE Connectivity (TE) is releasing its EB16 expanded beam optical pin and socket termini in new single mode and multimode variations. Both variations are based on an updated design that includes springless mating and crimpless cable retention. EB16 termini are built on TE’s PRO BEAM expanded beam connector technology, which expands and collimates the optical signal into a beam size well beyond its original size to help provide easier optical alignment, low sensitivity to contamination and consistent performance over thermal changes.

 

 

 

AutomationDirect Adds VNTC Tray Cable

AutomationDirect Adds VNTC Tray Cable

VNTC (Vinyl Nylon Tray Cable) 600 Volt Type TC-ER control cables from AutomationDirect are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial and where superior electrical properties are desired. VNTC cable is available in 18 AWG to 10 AWG with 3 to 24 unshielded copper conductors. Cables are cut to length in 1-foot increments with a 20-foot minimum.