Connectors / Cables / Terminal Blocks

icotek: EMC-KEL-DS – Split EMC Cable Entry Frames for Shielding Cables With Connectors / IP55
| |

icotek: EMC-KEL-DS – Split EMC Cable Entry Frames for Shielding Cables With Connectors / IP55

The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface. The front cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (EMC-KT). The EMC-KEL-DS frames match exactly the cut-out dimensions for 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.

 

 

 

icotek: IMAS-CONNECT – Adapter Grommets for Keystone Jacks, Pushpull Connectivity and Circular Connectors
| | |

icotek: IMAS-CONNECT – Adapter Grommets for Keystone Jacks, Pushpull Connectivity and Circular Connectors

The new modular adapter system IMAS-CONNECT is a modular designed grommet system for mounting circular connectors, Keystone jacks, hose fittings, pressure compensation elements and much more. By utilising the modular adapter system, the cable entry frame becomes a hybrid system. Pre-terminated and standard cables or hoses can be routed and at the same time the system serves as an interface for connectors.

 

 

 

Weidmuller: RockStar ModuPlug
| |

Weidmuller: RockStar ModuPlug

More for less: RockStar ModuPlug sets new standards. The modular connector system solves space problems by offering increased functionality with a reduced installation space, which in turn also helps keep the weight down. And all this with more convenient installation. Simply more of what you need and less of what you can do without.

 

 

 

Phoenix Contact: Installation Power Distribution (IPD) System
| |

Phoenix Contact: Installation Power Distribution (IPD) System

Phoenix Contact Installation Power Distribution (IPD) System efficiently and reliably connects push-in terminations through a bulkhead or device enclosure without special tooling. By using panel feed-throughs, devices no longer need to be opened to connect cables. The IPD system combines the bulkhead-mounted base and exterior hood under a single part number.

 

 

 

Remee Wire & Cable Introduces New Vigilance Access Control Cables
| |

Remee Wire & Cable Introduces New Vigilance Access Control Cables

Remee Wire & Cable, a high-integrity manufacturer of electronic wire and cable for reliable performance, has recently added three new Access Control Cables to their line of Vigilance Security, Alarm and Control Cables. These composite cables feature a new low capacitance shielded cable and shielded plenum and riser-rated cables for outdoor use.

 

 

 

Control Cabinet Accessories Acc. to NEMA Protection for North America
| |

Control Cabinet Accessories Acc. to NEMA Protection for North America

LÜTZE supplies certified control cabinet products that comply with the UL 50E standard for use in the North American market. These also include the LÜTZE USB and RJ45 panel connectors, as well as the CABLEFIX opening systems for cables. International companies that supply electrical operating equipment require international approvals. The UL and cUL norms for the US American and Canadian markets are known. Less well-known are the ‘IP-Norms’, i.e. the North American protection classes for casings that are summarized in the UL rating types for indoor and outdoor use.

 

 

 

Stewart Connector Expands the M12 Harsh Environment Offering to Include M12 X-Code to RJ45 Cable Assemblies
| | | |

Stewart Connector Expands the M12 Harsh Environment Offering to Include M12 X-Code to RJ45 Cable Assemblies

Stewart Connector, a Bel group company and manufacturer of high-speed connectors used in data communication applications, recently added M12 X-Code to RJ45 cable assemblies to their offering of M12 harsh environment solutions. M12 X- Code cable assemblies are the ideal solution for Ethernet connectivity up to 10 Gbps in factory and industrial applications.

 

 

 

Cinch Connectivity Solutions Announces the Johnson 1.85mm 2.4mm 2.92mm Low Profile End Launch Connectors, Up to 67GHz

Cinch Connectivity Solutions Announces the Johnson 1.85mm 2.4mm 2.92mm Low Profile End Launch Connectors, Up to 67GHz

Cinch Connectivity Solutions recently announced the Johnson 1.85mm, 2.4mm and 2.92mm Screw-on Low Profile End Launch Connectors. These end launch connectors are easy to mount and to remove from PC Boards, work with various board thicknesses and reducing the footprint requirements without sacrificing performance, resulting in design convenience.

 

 

 

AutomationDirect Adds 22-Gauge Machine Tool Wire
| |

AutomationDirect Adds 22-Gauge Machine Tool Wire

Insulation type MTW machine tool wire is now available in 22-gauge from AutomationDirect. Existing MTW wire sizes are 20 AWG to 10 AWG. The 22 AWG wire offers an 8% smaller diameter with a 3 amp 600-volt rating which is needed for many types of terminal block connections that cannot accept larger wire. MTW wire is designed and approved for use in industrial and commercial equipment.

 

 

 

Increased Touch Protection for Easily Accessible Areas
| | | | | | | |

Increased Touch Protection for Easily Accessible Areas

Small, compact and now touch-proof: All connectors in WAGO’s WINSTA MINI Pluggable Connection System are now available with IP40 protection. WAGO’s compact installation connectors, which impress with their small size and tool-free actuation, are ready for duty in highly accessible areas, including shops, trade fair construction or even furniture making.

 

 

 

TOPJOB S Double-Deck Terminal Blocks With Easy Vertical Conductor Entries
| |

TOPJOB S Double-Deck Terminal Blocks With Easy Vertical Conductor Entries

Control cabinets are important for the trouble-free operation of machinery, equipment and building systems. They must accommodate as many components as possible in a compact space. WAGO’s TOPJOB S Rail-Mount Terminal Blocks have a long-standing reputation for ensuring safe and maintenance-free system operation in a wide variety of industrial applications and building installations.

 

 

 

Phoenix Contact: Protection for Safety-Related Systems
| |

Phoenix Contact: Protection for Safety-Related Systems

Safety-related systems, such as signaling systems in the railway industry, require reliable lightning and surge protection. The product requirements are increasingly changing with the advent of digitalization. Deutsche Bahn directive 819.0808 also lays the foundation for the infrastructure of the future.

 

 

 

Cinch Connectivity Solutions Announces Johnson RG-174 BNC Cable Assembly Expansion
|

Cinch Connectivity Solutions Announces Johnson RG-174 BNC Cable Assembly Expansion

Cinch Connectivity Solutions, a Bel group company, recently announced the latest release of BNC RG-174 cable assemblies to the Johnson cable assembly portfolio. This expansion includes the addition of BNC to BNC, BNC to SMA and BNC to SMB interfaces available in multiple lengths up to 10 feet in English and 2 meters in Metric.

 

 

 

Weidmuller: New AAP 11 & 12 Control Voltage Distribution Terminal Block for Space Saving Requirements
| | | | |

Weidmuller: New AAP 11 & 12 Control Voltage Distribution Terminal Block for Space Saving Requirements

Weidmuller has recently introduced a new terminal block offering to provide an alternate solution managing control voltage distribution for Machinery/Controls equipment within the Process and Power Generation Industries. The AAP 11&12 double output control voltage terminal series is designed to reduce cabinet space, when compared to traditional terminal setups by 30-40% and is ideally suited for applications where there is limited panel space.

 

 

 

ASi-5 Digital Module With 16 I/Os: Maximum Flexibility & Channel-Specific Diagnostics
| | | |

ASi-5 Digital Module With 16 I/Os: Maximum Flexibility & Channel-Specific Diagnostics

Gain maximum flexibility in your application with the new self-configuring 16 I/O digital module by Bihl+Wiedemann (BWU4230). The 16 digital signals of the ASi-5 slave can be distributed as required – e.g. to 12 proximity sensors and 4 valves in an application with packaging technology. The IP67 module is ideally suited for high I/O densities.

 

 

 

New Allen-Bradley FLEX 5000 HART I/O Saves Design and Maintenance Time
| | | |

New Allen-Bradley FLEX 5000 HART I/O Saves Design and Maintenance Time

Design and controls engineers can now more easily access, configure and manage HART devices using the new Allen-Bradley FLEX 5000 highly integrated HART I/O modules. The simplified programming experience, available with the Studio 5000 Logix Designer application, can help simplify design, maintenance and operational productivity.