Connectors / Cables / Terminal Blocks

Cinch Connectivity Solutions Announces the Expansion of Johnson UMC to SMA Adapters (Between Series), Operating Up to 6 GHz
| | | |

Cinch Connectivity Solutions Announces the Expansion of Johnson UMC to SMA Adapters (Between Series), Operating Up to 6 GHz

Cinch Connectivity Solutions recently announced their expansion of UMC to SMA Adapters. These adapters support conversion between UMC and the popular SMA interfaces, with both a Jack-Plug and Plug-Jack version. Cinch Connectivity Solutions’ Johnson series of UMC to SMA Adapters complement the UMC family offering of a PCB-mounted connector and more than 75 cable assemblies, available in low profile and ultra-low-profile mating heights of 2.5mm and 2.0mm, in standard fixed lengths between 50mm and 500mm.

 

 

 

Belden: MarineTuff Offshore and Marine Cable Solutions
| | |

Belden: MarineTuff Offshore and Marine Cable Solutions

The demand for enhanced security and high quality data, audio, and video is increasing in the offshore environment. Therefore, the quality and reliability of your fiber optic cables is of increasing importance. MarineTuff fiber products offer quality data, audio, and video functions for offshore structures. For instance, in the event of an electromagnetic surge, fiber guarantees 100% of your communication and the network infrastructure remains available.

 

 

 

Cinch Connectivity Solutions Introduces Midwest Microwave Qualified Parts for Space (QPS) Attenuators
| |

Cinch Connectivity Solutions Introduces Midwest Microwave Qualified Parts for Space (QPS) Attenuators

Cinch Connectivity Solutions recently introduced its new Midwest Microwave line of space-qualified QPS coaxial attenuators.  QPS Attenuators are specifically designed for signal processing and communications applications in satellite payload and ground testing equipment used in both the traditional GEO, as well as the rapidly growing LEO space markets.

 

 

 

Stewart Connector Announces Custom Fiber Flex Assembly Design and Manufacturing
| |

Stewart Connector Announces Custom Fiber Flex Assembly Design and Manufacturing

Stewart Connector recently announced that it has Fiber Flex cable assembly capabilities, in their Glen Rock, PA facility. This capability supports the company’s growth in commercial applications where complex routing, minimal space, critical airflow is required. Fiber Flex assemblies provide a superior solution compared to individual cabling for fiber routing and management of PCB card level and back-plane applications.

 

 

 

Sager Electronics: Molex Mini-Fit Family of Power Connectors
| |

Sager Electronics: Molex Mini-Fit Family of Power Connectors

A wide range of OEMs require high-current, high-density power connectors that also support design flexibility. To meet these needs, the Molex Mini-Fit Family of Power Connects (Mini-Fit Jr., Mini-Fit Plus, Mini-Fit Blind-Mate Interface (BMI) and Mini-Fit TPA2 Connectors) offer polarized housings with isolated terminals, positive locks and low-engagement forces.

 

 

 

AutomationDirect: Instrumentation & PLTC Cables
| | | | | |

AutomationDirect: Instrumentation & PLTC Cables

AutomationDirect offers 300V UL Instrumentation Cable available with 16 AWG, 18 AWG or 20 AWG conductors in 1, 2, 4, or 8 twisted pairs with an overall shield or in 2, 4, or 8 individually shielded twisted pairs with an overall shield. The overall shielded cables have an aluminum/polyester foil shield with 100% coverage and a tinned copper continuous drain wire for protection against external electrical noise interference.

 

 

 

Mouser: TE Connectivity 2.5mm Sealed Signal Double Lock Connectors
| | |

Mouser: TE Connectivity 2.5mm Sealed Signal Double Lock Connectors

TE Connectivity 2.5mm Sealed Signal Double Lock Connectors offer secondary locking safety combined with IP67 rated sealing protection. A space-saving 2.5mm centerline provides a compact design solution and robust seals enable reliable performance in water-related or high humidity environments. Contacts are on a miniature 2.5mm centerline spacing and accept 26AWG to 20AWG wire.

 

 

 

Allied Electronics & Automation: HARTING’s T1 Industrial for Single Pair Ethernet
| |

Allied Electronics & Automation: HARTING’s T1 Industrial for Single Pair Ethernet

Single Pair Ethernet is the future of industrial Ethernet connectivity. HARTING understood this in 2015 when design began of a connectivity solution that would serve as the industrial and heavy industrial standard for Single Pair Ethernet. HARTING took the best parts of Ethernet technology already available, analyzed and removed the pain points of the current industrial Ethernet connectivity, and innovated the T1 Industrial.

 

 

 

Stewart Connector Introduces a DIN Rail RJ45 Mounting Module
| |

Stewart Connector Introduces a DIN Rail RJ45 Mounting Module

Stewart Connector, a Bel group company and world-wide manufacturer of high-speed connectors used in data communication applications, recently released a DIN Rail RJ45 Mounting Module, most commonly used in industrial networking applications. Stewart Connector’s DIN Rail RJ45 Mounting Module is designed for easy tool-less mounting and RJ45 jack installation.

 

 

 

NCC Connectors Suit Applications With Restricted Space and Offer High Protection Levels When Connected and Disconnected
| | |

NCC Connectors Suit Applications With Restricted Space and Offer High Protection Levels When Connected and Disconnected

The newly developed products target the growing need for suitable, reliable circular connectors in many applications including lighting and test and measurement instrumentation. The Series 670 are 5-pin subminiature connectors with a bayonet closure and a cable bushing from 3.5 to 5.0mm. The flange-type socket is provided with soldered and dip-soldered contacts.

 

 

 

Bel Magnetic Solutions Expands the Vertical Mount MagJack ICM Series
| | | |

Bel Magnetic Solutions Expands the Vertical Mount MagJack ICM Series

Bel Magnetic Solutions, a Bel group company, recently expanded the Vertical Mount MagJack ICM series to include 1GBASE-T, 2.5GBASE-T, 5GBASE-T and 10GBASE-T with 60W PoE options. These Vertical Mount ICMs are ideally suited for 5G cellular equipment, single-board motherboards, industrial PCs, printers, daughter cards, industrial controllers, and any applications requiring a vertical mount Ethernet connector, where board space is a premium.

 

 

 

Easily Connect Ethernet Devices and Gain Advantages of IO-Link
| |

Easily Connect Ethernet Devices and Gain Advantages of IO-Link

Balluff’s new CC-Link IE Field Basic network block with IO-Link makes it easy to connect Ethernet devices while providing the benefits of IO-Link. With 100 Megabit Ethernet, it delivers optimal performance in applications with low automation levels, where the gigabit speed of the CC-Link IE Field Master is not needed, such as bar loading magazines. It uses the Seamless Message Protocol (SLMP) for transparent communications to enable seamless connectivity within all levels of manufacturing.

 

 

 

PBUS 14 Panduit logo 400
| | |

Panduit: Single Pair Ethernet Delivers New Opportunities in Industrial Connectivity

Panduit will be introducing a new line of Single Pair Ethernet connectivity at Rockwell Automation Fair 2020. Single Pair Ethernet (SPE) is a newly standardized communication technology that extends 2- and 4- pair ethernet to devices for both industrial control and building automation. It provides an evolution in device connectivity by standardizing how devices can integrate into existing software platforms without gateways.

 

 

 

Wieland Electric Complies With All EUROMAPs for Connectors in Polymer Machines
| |

Wieland Electric Complies With All EUROMAPs for Connectors in Polymer Machines

Standardized interfaces offer many advantages and allow, among other things, a flexible adaptation of production facilities to new requirements. This also applies to plastics and rubber processing machines. Here EUROMAP, the umbrella organization of European plastics and rubber machine manufacturers, has defined standards for interface requirements, including 16 Euromap recommendations for the heavy-duty connector sector.