Connectors / Cables / Terminal Blocks

PB-52-Automation-ThermocoupleCables-400.jpg
| |

More Cut-to-Length Type J and Type K Thermocouple Extension Wire from AutomationDirect

AutomationDirect has added more choices to their selection of cut-to-length Type J and Type K thermocouple extension wire. Thermocouple extension wire helps maintain signal integrity when thermocouple signals are required to travel long distances to reach operating instrumentation or PLC input cards. The new wire additions include 20AWG and 16AWG sizes with two conductors in shielded or unshielded versions jacketed with extruded PVC and extruded FEP Teflon insulation.

 

 

 

PBUS-34-binder-NCCSeries670-400.jpg
| | | |

Subminiature Connectors Meet the Highest Demands on Protection and Flexibility

The compact and highly flexible circular connectors of binder’s 670 series withstand demanding protection requirements. Rated as particularly innovative among more than 100 products, they have now received a prestigious award. Form factor, protection degree, signal integrity – these are key features of binder’s NCC series 670 (Not Connected Closed). Thanks to a special design feature, the extremely flexible, space-saving subminiature connectors can achieve IP54 protection when unmated and IP67 when mated.

 

 

 

PB-52-Beckhoff-StepperMotorIOTerminal-400.jpg
| | | |

Beckhoff Announces Compact, Cost-effective Stepper Motor I/O Terminal

With the new EL7062 dual-channel EtherCAT Terminal, Beckhoff enables the direct connection of two stepper motors in the medium power range of up to 3 A and for a voltage range of 8–48 V. With flexible parameterization and minimized channel costs, the flexible motion interface is ideal as a low-cost drive for a wide range of stepper motor applications. In an extremely compact form factor, the 24-mm-wide EL7062 EtherCAT Terminal contains two stepper motor output stages, two digital inputs for limit switches, etc.

 

 

 

PBUS-34-nVent-XLTraceCables-400.jpg
| |

nVent RAYCHEM Next Generation XL-Trace Edge Heating Cable Launches

nVent Electric plc, a global provider of electrical connection and protection solutions, recently launched the nVent RAYCHEM XL-Trace Edge self-regulating heating cable for commercial pipe freeze and grease waste flow maintenance applications. This commercial-grade freeze protection heat tracing cable can run at the highest published maximum operating and exposure temperatures in North America.

 

 

 

PBUS-34-CUI-HDMIConnectors-400.jpg
| | |

CUI Devices Introduces HDMI Connectors Line to Connectors Portfolio

CUI Devices’ Interconnect Group recently announced the addition of HDMI connectors to its connectors product portfolio. Available in Type A and mini receptacle or plug versions, CUI Devices’ HDMI connectors all conform to the latest HDMI 2.1 standard. The models offer surface mount, mid mount SMT, or through hole mounting styles with horizontal, vertical, or vertical/right-angle orientations, giving engineers several options for their audio/video design needs.

 

 

 

PBUS-33-LUTZE-SUPERFLEX-400.jpg
| | |

Higher Power Loads Without Changing the Cable Cross-Section

The 90 °C control cables with a PUR jacket for 300 V and 1000 V rated voltage, are new products in the LÜTZE portfolio. Also, the servo motor cables that were optimized for use in Siemens and Bosch-Rexroth systems are also specified for a higher temperature range. The new LÜTZE SUPERFLEX cables have two specific benefits. They not only allow the use of higher-quality materials and a higher power load capacity without changing the cross-section…

 

 

 

PB-51-Harting-RJIndustrialMultiFeature-400.jpg
| |

A Smart Infrastructure Charting the Course to the IIoT

Digitalisation is advancing uniformly networked corporate processes in development, production and sales. Presenting appropriate and expedient infrastructure solutions for easy access to the IIoT, HARTING is factoring in the current trends and developments shaping the industrial transformation. Connector innovations such as the RJ Industrial MultiFeature, preLink RJ45 as well as the T1 Industrial interface for Single Pair Ethernet according to IEC 63171-6 in M12 and M8 housings are playing a special role.

 

 

 

PBUS-33-binder-763ACodedM12Connector-400.jpg
| | | |

binder: M12 Signal Connector With Square Flange

binder, a major supplier of industrial circular connectors, offers various A-coded M12 connectors as part of its 763 product series, which are equipped with a square flange housing for assembly. A special feature is the positionability of the A-coding, which supports variable cable installation. Industry-standard, standardized M12 round connectors with A-coding according to DIN EN 61076-2-101 are an established part of sensor and actuator technology in typical factory automation and robotics applications.

 

 

 

DCS-30-Phoenix-RJ45Cables-400.jpg
| |

Phoenix Contact: RJ45 Patch Cables for Industrial Applications

The Phoenix Contact portfolio now includes the new RJ45 patch cables for industrial applications. The RJ45 INDUSTRIAL patch cable series enables data speeds of up to 10 Gbps in accordance with CAT5 and CAT6A and is particularly suitable for Industrial Ethernet and PROFINET environments. The connectors with a uniform look and feel feature high-quality overmolding and a protected locking clip to ensure robustness.

 

 

 

PBUS-32-IBOCO-DINBLOCK-400.jpg
| |

Iboco: Mounting Blocks

Introducing IBOCO’s Mounting Blocks line. This product is used to fix wire duct to rail. ZP1 mounting inserts are used for fixation and are provided with IBOCO Mounting block. ZP1 can also be bought separately if needed for other application. IBOCO currently provides Dinblock only for mounting rails OMEGA 3 type. This product has been specifically designed to connect wire duct to rail thanks to ZP1 mounting inserts.