The KEL-FG-ER cable transit frame from icotek is designed ffor installation of cables with connectors and conduits at an angle of 90° to the cabinet, enclosure or machine wall.
Linx Technologies has introduced series of BNC RF connectors combine superior performance with quick connect/disconnect.
CUI Devices’ Interconnect Group recently announced the addition of circular connectors to its connectors product portfolio. Available in M12 connector types, CUI Devices’ CDM12 family offers a range of male or female versions with contact position options of 3, 4, 5, 8, and 12 pins. As A-coded devices that support 1 Gbit Ethernet, all M12 connector models carry IP67 ratings to deal with harsh environments found in industrial and factory automation applications.
Bolstering performance resiliency in extremely harsh environments, the Molex Squba sealed wire-to-wire connector s ystem has a UL approved, IP68-seal rating to withstand the ingress of dust and moisture. These connectors also offer seal caps to provide optimal protection and guidance.
binder recently announced the launch of a short version of the 423 series: circular connectors in the M16 form factor with a length of approximately 47 mm. These are available as 2-pin to 19-pin variants and meet IP67 requirements when mated. The product launch concerns short, shieldable cable plugs and sockets, each with cable clamp, in both solder and crimp versions.
HELUKABEL recently announced its MULTIFLEX 512-PUR UL/CSA and its shielded variant (MULTIFLEX 512-C-PUR UL/CSA) are now certified according to the internationally recognized Norwegian Electrotechnical Committee (NEK) standard TS 606, which defines the requirements for halogen-free cables that are resistant to drilling mud. This approval is found primarily in applications associated with the oil and gas industry.
Modular Multifunctional Gate Box (MGB) from EUCHNER is fully customizabe to optomize system performance.
New Murrelektronik data cables are high-flex shielded Ethernet Cat5e cables offering various connector styles, including D-coded M12 to M12, M12 to RJ45, RJ45 to RJ45, and M12 to pigtail. These cables are flame-retardant and chemical resistant with a tough TPE (thermoplastic elastomer) jacket for typical industrial applications. A selection of RJ45 IDC field wireable connectors and adapters have also been added to provide custom terminations for specific applications.
Hirose Electric has announced that the ix Industrial™ connector series has been specified as a new standard interface connector for Ethernet applications by PROFINET (Process Field Network).
The new PTVFIX distribution blocks from Phoenix Contact are a combination of the PTFIX distribution block system and the PTV series with vertical conductor connection. The lateral Push-in connection features great advantages, in particular where space is limited. The small size and the modular compatibility of the distribution block system is also an advantage.
New Cat5e RJ45 feedthrough connector and plug carrier from Cliff Electronics has protection to IP65 for rugged applications.
binder now offers connectors with D-coding in the M8 form factor as part of its 818 product series. The products are ideal for Industrial Ethernet applications with communication protocols such as EtherCAT, EtherNet/IP or PROFINET according to IEEE 802.3 via twisted-pair cables of the Cat-5e category. Accordingly, the 4-pin connectors enable the network connection of actuators and sensors of particularly small size with data rates of up to 100 Mbit/s.
With the new AL200S PROFIsafe IO-Link module from ifm electronic, it is now possible to operate standard safety sensors and actuators via IO-Link.
IP66 / IP68 hygienic multi-membrane cable entry plates from icotek available with metric threads M32 – M63.
Allied Electronics & Automation supplies HARTING’s award-winning Han 1A connector series, which is widely acclaimed for the space savings, time savings, and versatility granted by its miniature, modular, rectangular form factor with power, signal, and data capabilities and snap-in mating technology. Han 1A connectors require up to 30% less space than HARTING’s next smallest modular industrial connector, the Han 3A, and are made of robust, chemical-resistant plastic.
CUI Devices’ Interconnect Group recently announced the expansion of its line of pluggable terminal blocks with the addition of 17 new series and over 300 new SKUs. These highly economical models boast industry-best lead times and feature 2 to 24 pole counts as well as new pitch options of 3.5 mm, 5 mm, and 7.62 mm. Ideal for a variety of industrial control, automation, and test equipment applications, the TBP family of pluggable terminal blocks offers plug and receptacle connector types, etc.
