Power Distribution & Energy

PBUS-26-Yokogawa-TDLS8200Spectrometer-400.jpg
| | | |

Yokogawa Adds TDLS8200 Probe Type Tunable Diode Laser Spectrometer to Its OpreX Analyzer Lineup

Yokogawa Electric Corporation have recently announced that it has developed the TDLS8200 probe type tunable diode laser spectrometer and will release it for sale on May 6 as part of its OpreX™ Analyzer family. While featuring the same low installation cost, high measurement stability, and high reliability of the preceding TDLS8100, the TDLS8200 will be able to simultaneously measure oxygen, carbon monoxide, and methane gas concentrations directly and at high speed.

 

 

 

PBUS-26-Yokogawa-WT5000PowerAnalyzer-400.jpg
| | | | |

Yokogawa Test & Measurement Releases High Accuracy Current Sensor Element for Use With the WT5000 Precision Power Analyzer

Yokogawa Test & Measurement Corporation recently announced that it has developed the 760903 current sensor element for use with the company’s world-class power measurement solution, the WT5000 precision power analyzer. The 760903 current sensor element includes a number of new features that simplify the setup and use of external current sensors. This new product will go on sale on April 6.

 

 

 

PBUS-25-Klein-ConduitBenders-400.jpg
| | | |

Klein Tools Launches Line of Conduit Benders with New Patent-Pending Technology

Klein Tools, for professionals since 1857, recently introduced a new line of conduit benders, available in both heavy-duty cast iron and easy-to-handle reinforced aluminum, both featuring new patent pending Angle Setters that create a hard stop resulting in fast and accurate bends. “Klein Tools has always been an innovator in terms of designing tools, and this new line up of conduit benders is no exception to that,” says Dan Pearson, senior product manager at Klein Tools.

 

 

 

PBUS-25-Roxtec-ECTestStick-400.jpg
| | | |

Presenting the Roxtec EC Test Stick

The new Roxtec electrical continuity test stick enables you to check the electrical performance of cable transit installations using Roxtec BG or ES sealing modules. Just attach it to the cable shield or armor during installation to ensure a measuring point outside each sealing module. Then use any electrical continuity tester to measure the resistance between the cable shield or armor and the frame to get a quick indication of the electrical performance of the system.

 

 

 

PBUS-25-Cembre-HydraulicCrimpingTool-400.jpg
| | |

Cembre “Bilinear” Cordless Hydraulic Crimping Tool B500ND

B500ND is the first of a new generation of hand-held cordless tools, characterised by a “Bilinear” mechanical design. Equipped with a Smart Release system which automatically retracts the ram at the end of the operating cycle. B500ND is suitable for crimping electrical connectors onto conductor cross sections up to 600 MCM and uses the die sets common to all Cembre 6 tons tools and heads.

 

 

 

PBUS-25-Stahlin-DeadFrontPanel-400.jpg
| |

“No-Limits” Patented Panel Management System From Stahlin Enclosures Enables Innovative Use of Dead-Front Swing Panels

Marketplace innovation from Stahlin Enclosures has been highlighted by nearly 60 years of innovation. One of many examples is the availability of their Dead-Front Panels. These panels, used in conjunction with corner mounting posts, mount at the front of the enclosure. They are hinged on one side, secured to the other, and provide a larger working surface area when compared to the variable height swing panel.

 

 

 

PBUS-25-AlliedM-HMICOverKit-400.jpg
| | | |

Allied Moulded Products Have Expanded Their Electrical Enclosure Accessories With New HMI Cover Kits – AMHMI86 and AMHMI66

As of mid-October in 2020, Allied Moulded Products, Inc. had expanded its line of premium enclosure accessories with two additional size HMI cover kits AMHMI86 (8″ x 6″) and AMHMI66 (6” x 6”). HMI cover kits are designed to provide protection for instruments or electronics requiring routine attention or detail. The cover kit features a strong and rigid design, mounting securely to the outside (flat surface) of any enclosure, and makes accessibility to electronic components easy.

 

 

 

PBUS-25-Hammond-RackCabinet-400.jpg
| | | | |

Hammond Manufacturing: Swing-Out Sectional Floor/ Wall Mount Rack Cabinet

Hammond Manufacturing’s Swing-Out Sectional Floor/ Wall Mount Rack Cabinet HWF Series with 500lb capacity is available in 3 heights. Each one features optional doors that install in minutes and are available in vented, tinted window and solid. The top of the rear section includes a 3U cutout for optional rack mount fans or accessory mounting, and the main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.

 

 

 

PBUS-25-Automation-SaginawEnclosures-400.jpg
| | | |

Saginaw Enclosures from AutomationDirect

Saginaw has been serving the electrical industry since 1963, specializing in manufacturing top-quality carbon steel, galvanized steel, and stainless steel electrical enclosures built to accurate dimensions. AutomationDirect is proud to add Saginaw’s standard stock of enclosures, including freestanding, floor-mount, wall-mount, disconnect, modular, operator system, pushbutton, junction box, and wire trough enclosures, to our already extensive line of quality enclosures.

 

 

 

PBUS-25-TE-RaychemRSTI-400.jpg
| | |

Raychem RSTI-VS Separable Connector With Voltage Sensor

TE Connectivity has launched its Raychem smart RSTI-VS separable connector with voltage sensor, which can be used for grid monitoring and advanced earth fault and short circuit detection in IEC markets. Together with grid monitoring devices such as Kries’ IKI-50, distribution network operators can deploy condition monitoring, advanced fault detection and failure prediction in their networks.

 

 

 

PBUS-25-Phoenix-SUNCLIX-400.jpg
| | | | |

Phoenix Contact: New Connectors for Photovoltaics

New connectors as well as cable-based string fuses extend the SUNCLIX product series for photovoltaic systems from Phoenix Contact. The device connectors are particularly suitable for cabling inverters and string combiner boxes. The fast screw connection saves you time and money during installation. A patented Unlock system enables smaller actual dimensions as well as convenient release without the need for a special tool.

 

 

 

PBUS-25-SCHURTER-UMTHSurfaceMountFuse-400.jpg
| | | | | |

SCHURTER: UMT-H Surface Mount Fuse Is Petite and Powerful up to 50 A

SCHURTER’s prominent UMT-H surface mount ceramic fuse family now includes 40 A and 50 A current ratings with an impressive breaking capacity rating of 500 A at 125 VAC / 72 VDC. The series provides unprecedented overcurrent and short circuit protection performance in a package size of 5.3 x 16 mm. The UMT-H was originally developed to provide a smaller alternative to through-hole mounted 5 x 20 mm cartridge fuses, commonly used for primary circuit protection.

 

 

 

PBUS-25-Southco-M5MagneticDoorCatches-400.jpg
| | | | | |

Attractive New M5 Magnetic Catches From SOUTHCO Hold Panels and Doors in Place

SOUTHCO has recently introduced the latest product in its successful line of magnetic catches, with a new version that combines strength and style. Constructed of corrosion resistant stainless steel, the M5 Magnetic Catch combines a highly polished finish with the holding power of rare earth magnets to provide a robust and attractive solution for keeping doors and panels open or closed.

 

 

 

PBUS-25-Phoenix-EnergyStorageConnectors-400.jpg
| | | | | |

Phoenix Contact: Connectors for Energy Storage

With the new plug-in battery connections, Phoenix Contact provides you with a time-saving and safe connection technology for energy storage systems. The range includes connectors for busbar connection and battery pole connectors for applications of up to 1,500 V. Connectors for connecting to the busbar simplify the installation of plug-in systems in energy storage systems. The connectors with reverse-polarity protection are plugged onto the rear side of a storage system, eliminating the need for wiring work.

 

 

 

PBUS-25-Klein-KleinKurve-400.jpg
| | |

Klein Tools Introduces Wire Stripper/Cutter with Comfort Grip and Updated Lock

Klein Tools recently introduced the Klein-Kurve Wire Stripper/Cutter, a durable stamped wire stripper with six stripping holes and shear blades for cutting, plus a comfortable grip and updated lock. “In designing this wire stripper/cutter, Klein Tools engineers looked to make a tool that both solved a problem faced by trade professionals and was also comfortable and easy to use,” says Dan Pearson, senior product manager at Klein Tools.

 

 

 

PBUS-25-Klein-GFCIReceptacleTester-400.jpg
| | | |

Klein Tools Launches GFCI Receptacle Tester with LCD

Klein Tools recently introduced the GFCI Receptacle Tester with LCD, to detect common wiring problems, display voltage and inspect GFCI’s including time to trip breaker. “The RT250 was designed with unique features to make testing electrical outlets safer and easier,” said Sabrina Kalsi, product manager at Klein Tools.