USDK656 is a modern signal & power slip ring system, using Mersen premium carbon brush grades to transmit signal, data and power. Mersen premium carbon grades are based on tribological experience with low wear rate, which translates to less dusting, reliable data transfer, power and extended life of the component.
The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface. The front cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (EMC-KT). The EMC-KEL-DS frames match exactly the cut-out dimensions for 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.
Yokogawa Electric Corporation has recently developed the Collaborative Information Server (CI Server) and will be releasing it to the market in January 2021 as part of the OpreX Control and Safety System family. The solution will integrate the handling of all kinds of data from plant facilities and systems to enable the optimized management of production activities across an entire enterprise, and provide the environment needed to remotely monitor and control operations from any location.
Phoenix Contact’s new BOXTRAB surge protective device (SPD) combines protection for power, data, and signal within the same enclosure. In the process industries, instrumentation requires both power and signal/data control lines. Equipment users often protect these circuits with two dedicated surge protectors: one for power and one for signal. BOXTRAB provides an all-inclusive suppression system comprising independently configured protection arrays within a single enclosure to safeguard both the instrument’s power and signal lines.
The new electrician’s scissors from Phoenix Contact’s Cutfox series have durable micro-serrated blades, so they can deliver high cutting performance. The new scissors are suitable for cutting copper (flexible), aluminum (flexible), glass, and Kevlar fibers, plastic, and braided shield.
Recently, Panel Builder US had the opportunity to speak with Bitronics, a NovaTech company, that is focused on delivering power measurement, process control, and substation automation.
Enclosures are widely used to house electrical or electronic equipment along with switches, knobs and displays while providing a safe installation that prevents electrical shock to equipment users and protects the contents from the environment. Today’s enclosures are designed with features and materials that allow safe and protective use in hazardous areas, but also designed to be pleasing to the eye.
CARLO GAVAZZI has recently launched the RM1D Series, a comprehensive family of DC switching solid state relays. The RM1D Series is designed for applications that demand critical response times, rapid cycling, and high reliability. They are ideal for use in transportation, off-grid and renewable energy systems that run off batteries, as well as DC heaters, solenoids, valves, fans, and other equipment that requires DC switching.
The EJxxxx EtherCAT plug-in modules are electronically based on the well-known EtherCAT I/O system and their design allows them to be directly attached to a circuit board. The circuit board is an application-specific signal distribution board that distributes signals and power supply to individual application-specific plug connectors in order to connect the controller to further machine modules.
WAGO adds two new switches that are tailored to substation automation to its growing product range. The 852-1505/000-001 Switches are designed for “Power over ETHERNET” (PoE), which provides power supply and data transfer together through just one ETHERNET cable. This streamlined wiring configuration offers significant potential savings for installation and operating costs while taking up significantly less space.
A new high-current variant joins WAGO’s line of 3-phase power measurement modules. The new 750 Series Module measures DC and AC currents via external shunts up to 20,000 A, augmenting the upper-range of WAGO’s energy measurement technology portfolio.
UCS series universal electronics housings from Phoenix Contact are now also available with ready-made cutouts for the 7 inch touch displays of Raspberry Pi boards, as well as all the standard connections for the mini computers. The polycarbonate housings provide a functional package for the B2 and B3 Raspberry Pi models.
The CRIMPFOX VARIO 4S crimping tool from Phoenix Contact ensures reliable processing of insulated, uninsulated, and TWIN ferrules. The integrated pressure lock guarantees a complete and process-reliable crimping cycle and, when necessary, can be released without using a special tool.
TTI, Inc., a distributor of electronic components, was pleased to recently introduce a suite of Application Programming Interfaces (APIs), making it possible for engineering and procurement customers to access inventory, pricing information, and place orders in real time.
In industrial IoT, all the components of a production environment are interconnected via a digital infrastructure and must therefore be capable of communicating with each other – the power supplies included. This why Weidmüller’s PROtop devices also feature the topGUARD load monitoring system and a plug-in communication interface. topGUARD is a modular electronic load output system comprising a feed-in module and several connected output modules.
