Industry

Emerson: New Energy Manager Solution Reduces Energy Costs, Carbon Emissions for Manufacturers
| | | | |

Emerson: New Energy Manager Solution Reduces Energy Costs, Carbon Emissions for Manufacturers

Emerson has launched its new Energy Manager solution, a pre-engineered hardware and software offering designed to simplify industrial electricity monitoring with quick setup and intuitive operation. Ready out of the box, the Energy Manager solution monitors asset energy use in real time, allowing manufacturers to gain deeper insight into energy consumption and operating costs, lowering carbon dioxide (CO2) emissions and maximize energy and operational efficiency.

Pilz: IndustrialPI – The Flexible and Versatile Industrial PC That Adapts to All Your Needs
| | | |

Pilz: IndustrialPI – The Flexible and Versatile Industrial PC That Adapts to All Your Needs

With the IndustrialPI industrial PC, Pilz supports you in the implementation of the most varied applications in industrial automation. Thanks to its modular design, the open, Linux-based operating system and integrated interfaces, IndustrialPI is a true all-rounder. IndustrialPI is versatile, whether purely as an industrial PC, industrial controller (soft PLC) or as an IIoT gateway for your data. It is thus ideally equipped to implement your IIoT, automation and motion projects in industrial automation environments.

Rittal Enables AI With Modular Cooling Distribution Unit (CDU) Capable of 1 Megawatt (MW) Cooling
| | |

Rittal Enables AI With Modular Cooling Distribution Unit (CDU) Capable of 1 Megawatt (MW) Cooling

In close cooperation with hyperscalers and server OEMs, Rittal has developed a modular cooling distribution unit (CDU) that delivers a cooling capacity of over 1 MW. It was the centerpiece exhibit at Rittal’s booth A24 at the 2024 OCP Global Summit on October 15-17. The CDU uses direct liquid cooling based on water – and is thus an example for new IT infrastructure technologies that are enablers for AI applications.

AutomationDirect: LS Electric XMC EtherCAT Motion Controllers and EtherCAT Bus Coupler
| | | | | |

AutomationDirect: LS Electric XMC EtherCAT Motion Controllers and EtherCAT Bus Coupler

AutomationDirect has added the powerful LS Electric XMC motion controller to provide full EtherCAT master motion control. With a blindingly fast processor (scan times as low as 5ns) and built-in support for 8 or 16 axes of EtherCAT-based motion control (depending on the model), the XMC controller can handle virtually any motion control application.  These brick-style controllers feature 8 discrete inputs, 16 discrete outputs, 2 analog inputs, and 2 analog outputs. Utilize the new EtherCAT bus coupler with the diverse LS XGB PLC I/O modules to expand the XMC controller I/O capability.

AutomationDirect: Schmersal 250 Series Heavy-Duty Limit Switches
| | | |

AutomationDirect: Schmersal 250 Series Heavy-Duty Limit Switches

AutomationDirect has added new Schmersal 250 series heavy-duty limit switches featuring rugged cast iron housings for the harshest environments. The selection includes models with side rotary levers with metal or plastic rollers, metal belt alignment rollers, and high-temperature models with metal rollers. The belt alignment switches prevent costly equipment damage by providing warning, alarm, or auto-align signals when a conveyor belt drifts too far to one side and activates the switch.

Banner Engineering: R50C Motor Driven Roller (MDR) Controller – Compact Plug-and-Play Motor Driven Roller Control
| | | | | | |

Banner Engineering: R50C Motor Driven Roller (MDR) Controller – Compact Plug-and-Play Motor Driven Roller Control

The R50C MDR Controller helps keep control of conveyors and other equipment in one system and gives system designers more efficient control of motor driven rollers using a PLC. Modbus communication, two configurable I/O channels, and a 0–18 volt analog output provide precision MDR control for a variety of conveyor systems, as the R50C is compatible with many different types of MDRs with integrated controls. Standard A-coded M12 connectors for sharing signals, and L-coded M12 pass-through connections for daisy chaining up to 16 amps of motor power, simplify installation of multiple motor driven roller controllers on a conveyor.

Beckhoff Integrates Dynamic Weighing into Standard TwinCAT Automation Software
| | | | | |

Beckhoff Integrates Dynamic Weighing into Standard TwinCAT Automation Software

The TwinCAT 3 Weighing Library from Beckhoff adds a fast, precise scale for weight measurement directly into a standard machine control environment. This new PLC package, which supports manual and automatic triggering, is highly effective when implemented with measurement I/O modules from Beckhoff, particularly the ELM35xx and EL3356 EtherCAT Terminals. Equipped with high-performance signal filtering, this solution accelerates process sequences in wide-ranging applications. This eliminates the need for many standalone, single-purpose measurement and sensing solutions that would require additional engineering time and effort to integrate with the automation and controls equipment.

AutomationDirect: CITO StackFlow Series Modular Process Valves & Manifolds
| | | | | |

AutomationDirect: CITO StackFlow Series Modular Process Valves & Manifolds

AutomationDirect has added the CITO StackFlow series of modular process valves. This system of high-flow, robust components can stack together to form a valve bank assembly. Each module includes common inlets at each end and an outlet discharge at the bottom. Manual and solenoid valves are available, as well as distribution blocks that can all be included in the same assembly. Port adapters are sold separately, allowing multiple threaded connection options to the inlet or outlet port. Flow control outlet port adapters allow fine-tuning fluid flow out of the discharge.

AutomationDirect: Additional Murrelektronik Field Wireable Connector Options
| |

AutomationDirect: Additional Murrelektronik Field Wireable Connector Options

AutomationDirect has added M12 field wireable connectors with additional cable size options from Murrelektronik. New 5-pin A-coded connectors are available for 4-8mm/26-18 AWG cable sizes, in axial or 90° male or female connector styles. New D-coded connectors offer 4-pin configurations for 4-8mm/26-18 AWG cable sizes, in axial or 90° male connector styles. The L-coded connector additions are 5-pin for 9-13mm/16-14 AWG cable sizes with axial male or female connector options.

Pfannenberg Highlights Compact Packaged CCE Chillers for Efficient and Reliable Cooling
| | | | | | |

Pfannenberg Highlights Compact Packaged CCE Chillers for Efficient and Reliable Cooling

Pfannenberg, Inc. highlights its line of high-efficiency Compact Packaged (CCE) Chillers for a range of commercial and industrial applications. These compact chillers are an ideal centralized and cost-effective solution for use in machine tools, lasers, process control systems, and other applications where precise temperature control and reliability are critical.

OnFILTER: New Line of DIN Rail Mounted EMI Filters
| |

OnFILTER: New Line of DIN Rail Mounted EMI Filters

OnFILTER, a California-based company, presents its complete line of DIN rail EMI filters suitable for UL508-A electrical panels.  Filters cover wide range of applications: AC, DC, ground, motion control (servo/VFD/steppers), power line communication (PLC), and 4…20mA data, helping to improve error-free uninterrupted operation. Patented filters offer high performance in small packages.

SCHURTER OGN Adapter
| |

SCHURTER: New OGN Adapter Replaces Two Products at Once

The SCHURTER OGN fuse holder, which is available in THT, SMT and THR technology, offers a variety of different covers in addition to a dedicated plugging aid. Until now. SCHURTER has launched a new OGN adapter that fulfills both functions at the same time.  The currently available OGN plugging aid is a very useful tool…

Russelectric
| | | | |

Russelectric: System Control Upgrades for Critical Power Equipment 

Russelectric, A Siemens Business, has announced the availability of system control upgrades for critical power equipment to enhance reliability, operational control, and ease-of-maintenance. These upgrades are a cost-effective alternative to equipment replacement. By upgrading, customers can experience improved performance and capabilities, updated systems with the latest technology, and a prolonged lifespan for their mission-critical equipment.  Additionally, maintenance…

CRYSTAL industrial panel PCs
| | |

Cincoze: Industrial Panel PCs Offer Comprehensive HMI Solution

The CRYSTAL product line from Cincoze is designed for HMI applications in harsh environments. The CRYSTAL product line includes three series: industrial panel PCs for harsh indoor environments, sunlight readable panel PCs for outdoor high-brightness conditions, and open frame industrial panel PCs for seamless integration with machines. Industrial-grade rugged protection and international standards compliance, along…

GracePort® Round Panel Interface Connectors
| | | | |

Grace Technologies: Expanded GracePort Product Line to Include Circular Interface Connector

The GracePort ThruViewTM 360 enables non arc flash certified personnel to safely and securely access PLCs, VFDs and industrial networks, bypassing the need to open industrial control panel doors. Its 4″ round panel interface housing simplifies installation with a standard knockout punch, cutting setup time to under 10 minutes. UL listed for compatibility with existing…

Leviton 400 Amp Load Center
| | |

Leviton: 400 Amp Load Center to Meet Increasing Residential Electrical Needs

Leviton recently announced the launch of its first-ever 400 Amp Meter Main Load Center, along with a 300 Amp model. This innovative addition to Leviton’s product line is designed to meet the growing demand for larger electrical service in large-scale residential applications, highly electrified homes, and future-proofing installations. With this new offering, Leviton continues to…