Industry

Hammond Manufacturing: DTI Series Semi-Recessed Indoor Air Conditioner for Clean Enclosure Cooling
| |

Hammond Manufacturing: DTI Series Semi-Recessed Indoor Air Conditioner for Clean Enclosure Cooling

Introducing the DTI Series semi-recessed indoor air conditioners from Hammond Manufacturing, designed for recessed mounting on any enclosure surface where high capacity system cooling is required. Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air, and optimum air circulation is achieved with maximum clearance distance between the warm inlet and cold outlet for reduced hot spot locations. A condenser with 3 mm fin spacing provides highly effective protection against strongly contaminated and aggressive ambient air.

Siemens: SINAMICS G120XE Enclosed Drive Series for Industrial Pump, Fan and Compressor Use in Harsh Environments, Heavy-Duty Positioning
| | | | | |

Siemens: SINAMICS G120XE Enclosed Drive Series for Industrial Pump, Fan and Compressor Use in Harsh Environments, Heavy-Duty Positioning

Recently, Siemens announced the immediate availability of a new enclosed drive system, the SINAMICS G120XE, designed specifically for the demands of industrial pump, fan and compressor applications in a wide variety of markets.  Built around the popular SINAMICS G120X infrastructure drive, this new enclosed system is ideal for fast design and commissioning in industries such as oil-and-gas/petrochemical, water/wastewater, power plants, industrial climate control, refrigeration and chillers in harsh environments.

Littelfuse: 54100 and 54140 Miniature TMR Sensors with Enhanced Sensitivity and Power Efficiency
| | | |

Littelfuse: 54100 and 54140 Miniature TMR Sensors with Enhanced Sensitivity and Power Efficiency

Littelfuse, Inc. has recently announced the release of its highly anticipated 54100 and 54140 miniature Tunnel Magneto-Resistance (TMR) effect sensors. These sensors offer unmatched sensitivity and power efficiency, revolutionizing the magnetic sensing industry. The key differentiator of the 54100/54140 sensors is their remarkable sensitivity and 100x improvement in power efficiency compared to Hall Effect sensors. These sensors offer activation in the x-y plane instead of the traditional z-axis, providing enhanced functionality.

Phoenix Contact: ESSENTIAL POWER – Power Supplies with Basic Functionality
| | | | |

Phoenix Contact: ESSENTIAL POWER – Power Supplies with Basic Functionality

The ESSENTIAL POWER line from Phoenix Contact offers basic 24 V power functionality for controlled commercial environments. The ESSENTIAL power supplies are designed for basic, cost-sensitive applications, such as building automation, vending machines, test and simulation, and solar cell production. The ESSENTIAL power supplies are listed to UL 61010, are CE approved, and meet the IEC 61588-2-16 safety transformer standard. The power supplies have a wide temperature range and a flexible wide-range input.

Hammond Manufacturing: EB-RACK Series Water Chillers
| |

Hammond Manufacturing: EB-RACK Series Water Chillers

Introducing the EB-RACK Series water chillers from Hammond Manufacturing, designed to provide recirculated coolant for most industrial applications air/water heat exchangers, process cooling, machine hydraulics or motor cooling. Standards for the EB-RACK Series include CCE Series – UL 508-A, CE, and EB50-160 WT Series – UL 508-A CE.

751-9401
| | | | | |

WAGO: 751-9401 Compact Controller 100

The controller 751-9401 (Compact Controller 100) is an automation device that can perform the control tasks of a PLC. It is suitable for mounting on a DIN rail and stands out on account of its various interfaces. Among other things, the controller has integrated digital and analog inputs and outputs and a serial onboard interface in accordance with EIA-485/RS-485. This controller can be used for applications in mechanical and systems engineering, in the processing industry, in building and energy technology.

AutomationDirect: ProductivityOpen P1AM-200 CPU & Productivity1000 TTL I/O Modules
| | |

AutomationDirect: ProductivityOpen P1AM-200 CPU & Productivity1000 TTL I/O Modules

AutomationDirect has recently added three new additions to the ProductivityOpen and Productivity1000 lines of controllers: the ProductivityOpen P1AM-200 open-source CPU, and the P1-08ND-TTL and P1-08TD-TTL DC I/O modules. The P1AM-200 CPU can be programmed in C++ using the Arduino IDE or in CircuitPython using any text editor, while the new I/O modules are 3.3 to 5 VDC input and 5 VDC output versions with 8 points per module.

Klein Tools: New Multi-Tester Combines Core Electrical Products into One Model
| |

Klein Tools: New Multi-Tester Combines Core Electrical Products into One Model

Klein Tools introduces the Digital Multi-Tester DMM with Receptacle Tester, combining core electrical products into one convenient model. “Trade professionals need tools that are versatile, and serve a variety of needs on the jobsite,” says Amy Hart, senior product manager at Klein Tools. “Our new Digital Multi-Tester is a first-of-its-kind tool that combines multiple core electrical products into one convenient tool.”

Bourns: Model 1260 Series DIN-Rail Pluggable Surge Protective Devices Designed for High-risk Electrical Service Entrance and Branch Panels
| | |

Bourns: Model 1260 Series DIN-Rail Pluggable Surge Protective Devices Designed for High-risk Electrical Service Entrance and Branch Panels

Bourns, Inc. has recently announced its new Model 1260 Series Surge Protective Devices (SPDs). These AC hybrid SPDs are designed with an advanced MG (MOV + GDT technology) architecture that delivers enhanced reliability and safety protection due to the architecture’s no leakage or follow-on current features. Bourns developed its latest series of hybrid SPDs as an optimum protection solution for electrical service entrances, branch panels, heavy industrial systems, EV charging stations or virtually any power circuit in installations without Lightning Protection Systems (LPS)/lightning rods.

Bel-Fuse: Expanded Line of 3PH Series Three Phase Transformers for Industrial and Medical Applications Now Available
| | | |

Bel-Fuse: Expanded Line of 3PH Series Three Phase Transformers for Industrial and Medical Applications Now Available

Bel Fuse Inc has recently announced that its Signal Transformer division released the expansion to their 3PH Series of Three Phase Dry Type Transformers targeted for use in medical, industrial, lighting, electric vehicle charging and green energy applications. Adaptable to multiple requirements, these rugged isolation transformers are designed and permanently configured for a 3 phase DELTA input and a WYE output. A value-added electrostatic shield (ESS) between input/output windings attenuates line noise by preventing feed-through of undesirable signals and serves as a safety feature in the event of single fault conditions.

Weidmuller USA: New RailAssembler and RailLaser Solutions Bring Automated Cabinet Building Closer to Customers
| | | | | |

Weidmuller USA: New RailAssembler and RailLaser Solutions Bring Automated Cabinet Building Closer to Customers

Weidmuller USA has recently announced the full operation of its Automated RailAssembler and RailLaser machines for a faster, more efficient way to assemble and mark terminal rails. “We’re proud to offer our customers in North America the next level for automated terminal rail assembly and marking. It’s a game-changer for panel builders in every industry sector,” said Carlus Hicks, Director Cabinet Products Division with Weidmuller USA.

5 Things to Know About the VX SE Floormount Enclosure System
| | | | | | |

5 Things to Know About the VX SE Floormount Enclosure System

As the landscape of modern manufacturing continues to change and evolve, today’s manufacturers need increased industrial enclosure versatility, particularly when it comes to floormount enclosures. Recent trends, like retrofitting for warehouse automation and the need to reduce your automation footprint, are pushing manufacturers to source enclosures that offer high levels of protection and durability without sacrificing flexibility or ease of integration. The new Rittal VX SE Floormount enclosure system fits the bill.

SCHURTER: DG11/DG12 Series Classic Power Entry Module with Circuit Breaker Gets Even Better
| | | | | | |

SCHURTER: DG11/DG12 Series Classic Power Entry Module with Circuit Breaker Gets Even Better

SCHURTER series DG11 and DG12 with and without mains filter features a first-of-its-kind ingress protection solution for IEC inlets, consisting of a seal gasket between the connector and mating V-Lock power cord. The blue colored latch of the V-Lock power cord and blue inlay of the appliance inlet indicate that the two have been equipped to provide an IP54 rating under load. The unit is screw mounted and rated IP67 between the power entry module and the panel.

Balluff: CIP Safety Block Offers IP67 Protection to Connect Safety PLC and Safety Nodes
| | | |

Balluff: CIP Safety Block Offers IP67 Protection to Connect Safety PLC and Safety Nodes

Balluff’s new CIP Safety I/O module safely connects sensors and actuators to industrial controllers, even in harsh environments. Its IP67 protection rating means it can be mounted directly on the machine, like Balluff’s IO-Link and standard I/O modules, to easily connect safety devices without spending the time and effort on traditional wiring terminations.

Schneider Electric: Modicon M241 Micro PLC
| | | |

Schneider Electric: Modicon M241 Micro PLC

The Modicon M241 is a Micro PLC designed to handle more advanced machine automation with a mixture of hardwired I/O and automation bus/communications with devices such as drives, motion, remote I/O and HMIs. The M241 has generous offer of Serial, Ethernet and CANopen communication ports in addition to USB and SD provisions. It’s available with either 24 or 40 I/O points and is expandable with TM3 I/O modules to handle up to a few hundred I/O points.

BR Series M8 & M12 Receptacles
| |

Banner: BR Series M8 & M12 Receptacles – Simplify Control Panel Connections

Panel builders have new tools for bringing power and signals back into protected areas with Banner’s M8 and M12 receptacles. These receptacles let users easily connect devices to a panel while maintaining a waterproof IP67 rating. Maintenance is also simplified: if a cable is damaged between a field device and the control panel, simply swap the damaged cable for a new one—no rewiring is needed in the panel. The slim profile leaves no bulky threads sticking out, allowing an easier fit into tight panels.