Oil & Gas

PBUS-26-Pepperl-SRSeriesEnclosures-400.jpg
| | |

New Stainless Steel Enclosure Series Tops Off the Ex e Solution Portfolio from Pepperl+Fuchs

Pepperl+Fuchs has now reinforced its position as a supplier of Ex-equipment with the introduction of the SR series. The new stainless steel enclosure series joins the GR series, made of glass fiber-reinforced plastic, in the range of the process automation specialist. The new series tops off a portfolio of highly flexible and cost-effective control and distribution solutions in type of protection Ex e (Increased Safety).

 

 

 

PBUS-26-Yokogawa-TDLS8200Spectrometer-400.jpg
| | | |

Yokogawa Adds TDLS8200 Probe Type Tunable Diode Laser Spectrometer to Its OpreX Analyzer Lineup

Yokogawa Electric Corporation have recently announced that it has developed the TDLS8200 probe type tunable diode laser spectrometer and will release it for sale on May 6 as part of its OpreX™ Analyzer family. While featuring the same low installation cost, high measurement stability, and high reliability of the preceding TDLS8100, the TDLS8200 will be able to simultaneously measure oxygen, carbon monoxide, and methane gas concentrations directly and at high speed.

 

 

 

PBUS-26-Acromag-NewEthernetRemote-400.jpg
| | |

Acromag’s New Ethernet Remote I/O Modules Support I/O Expansion of up to 64 Channels With a Mix of Signal Types on a Single IP Address

Acromag’s new BusWorks NT series remote I/O modules provide an Ethernet interface for analog, discrete and temperature signals. NTE Ethernet I/O models have dual RJ45 ports and a webserver with Modbus TCP/IP communication to monitor or control the internal I/O channels. An integrated DIN rail bus allows connection of up to three NTX expansion I/O modules.

 

 

 

MC-4-Automation-IDEMNonContactSwitches-400.jpg
| | | | |

IDEM Stand-Alone Non-Contact Switches from AutomationDirect

New IDEM non-contact magnetic coded switches use force-guided contacts and have an internal monitoring system so that they are stand-alone, not requiring the use of a separate safety relay. The wide 14mm sensing range provides a high tolerance to misalignment. Models are available that support automatic reset or manual reset, as well as a selectable auto/manual reset.

 

 

 

PBUS-25-Rockwell-PowerFlex755T-400.jpg
| | | |

Rockwell Automation Improves Security, Performance and Commissioning with PowerFlex 755T AC Drive Enhancements

Industries such as pulp and paper, automotive, tire and rubber, metals and water/wastewater may benefit from corrosive gas protection, which is now standard on Allen-Bradley PowerFlex 755TL, TR and TM drives. These drives have been tested to one of the most severe corrosive environment test protocols that combines industry leading, 30-day exposure in mixed flow gas testing per ASTM B845 Method K with proprietary tests for industries with sources of gaseous sulfur compounds.

 

 

 

PBUS-25-Southco-M5MagneticDoorCatches-400.jpg
| | | | | |

Attractive New M5 Magnetic Catches From SOUTHCO Hold Panels and Doors in Place

SOUTHCO has recently introduced the latest product in its successful line of magnetic catches, with a new version that combines strength and style. Constructed of corrosion resistant stainless steel, the M5 Magnetic Catch combines a highly polished finish with the holding power of rare earth magnets to provide a robust and attractive solution for keeping doors and panels open or closed.

 

 

 

PB-43-BR-PowerPanelC80-400.jpg
| | | | | |

B&R Automation: Switch It on and Get Started

The new Power Panel C80 offers the combined advantages of a powerful controller and a modern operator terminal in a single HMI device. The C80 installation is compatible with B&R Automation Panels. Machine builders thus have full flexibility when using the new panel and can scale their machine to meet changing performance and cost requirements. With its low installation depth, the C80 multi-touch HMI is suitable for particularly compact machines where space in the control cabinet is limited.

 

 

 

PBUS-25-Renown-iAlertSensor-400.jpg
| | | |

Renown Electric: i-Alert Monitoring Solution Sensors

The health of industrial machinery may be determined by measuring the equipment’s vibration signature.  If a gear, fan, or other essential component is out of alignment or otherwise functioning incorrectly, the vibrations of the machine will change. Monitoring vibrations can help to proactively identify problems before they substantially impact operations. Vibration analysis typically happens as part of a regularly scheduled maintenance cycle with data being compared monthly, quarterly, or annually.

 

 

 

PBUS-25-Emerson-Rosemount4390Transmitter-400.jpg
| |

Emerson Launches a Complete Suite of Digital Solutions for Operators Monitoring Corrosion and Erosion

Emerson recently introduced a complete corrosion and erosion monitoring portfolio with digital capabilities and full integration with the Plantweb digital ecosystem through the new Rosemount 4390 series of corrosion and erosion wireless transmitters and Plantweb Insight Non-Intrusive Corrosion application. The monitoring portfolio turns existing offline corrosion probes into online tools to monitor for the risk of corrosion or erosion in oil and gas processing.

 

 

 

PBUS-25-Phoenix-PTCB-400.jpg
| | | | |

Phoenix Contact: PTCB – Now with Class I, Div. 2 approval

The PTCB circuit breakers from Phoenix Contact are now approved for use in Class I, Division 2 hazardous locations. The entire family is Listed to UL 508 and Recognized to UL 2367. With the new approvals, the narrow circuit breakers meet the stringent requirements for installation in potentially explosive areas in North America. The PTCB family is ideal for 24 V DC applications that require high density and effective protected power distribution to multiple common loads.

 

 

 

PBUS-25-ABB-ReliaGear-400.jpg
| | | |

ABB’s New ReliaGear LV MCC Is the Next Level in Motor Control Centers

ABB has recently announced the release of ReliaGear LV MCC. The low voltage motor control center is built for simplicity and durability. Designed for safety, this low-voltage MCC was created to meet customer needs across a wide range of applications with a focus on smart MCC solutions. ReliaGear LV MCC is UL/cUL 845 listed and available globally in all ANSI markets where NEMA standards are prevalent and/or required.

 

 

 

DCS 6 Yokogawa logo 400
| | | |

Yokogawa to Begin Offering OpreX Batch Solution with Enhanced Portfolio for Batch Plants

Yokogawa Electric Corporation recently announced that it will begin providing OpreX Batch Solution on March 17. This solution for batch manufacturing applications eliminates the overlap between process control system (PCS) and manufacturing execution system (MES) related work and helps to enhance efficiency through all phases of the plant lifecycle, from design and engineering to actual operation, modification, and expansion.

 

 

 

OKW’s TOPTEC Plastic Enclosures – Now In 28 Permutations
| | | | | |

OKW’s TOPTEC Plastic Enclosures – Now In 28 Permutations

OKW’s TOPTEC plastic enclosures for PCBs with protruding connectors and interfaces are now available in 28 different permutations. TOPTEC is ideal for applications including monitoring, signalling and control systems; medical and wellness devices; laboratory technology; computer peripherals and IoT/IIoT. Installations are faster because pre-assembled PCBs fitted with protruding connectors or interfaces can be mounted directly into the case – with no need to wire them in afterwards.

 

 

 

Honeywell Introduces New Enterprise Software to Help Gas Distributors Transform Metering Operations
| | |

Honeywell Introduces New Enterprise Software to Help Gas Distributors Transform Metering Operations

In early November of 2020, Honeywell announced the release of Measurement IQ (MIQ) Optimize – an enterprise-wide solution for monitoring meters, gas chromatographs and other measurement assets. The new software solution collects and analyses diagnostic information from devices across different sites for a real-time overview of metering health.

 

 

 

Yokogawa Releases CENTUM VP R6.08 Integrated Production Control System
| | | | | | | | |

Yokogawa Releases CENTUM VP R6.08 Integrated Production Control System

On January 20, 2021, Yokogawa Electric Corporation announced that it would be releasing CENTUM VP R6.08, an enhanced version of the CENTUM VP integrated production control system for industrial plants, and released it two days later on January 22. CENTUM VP is a core product in the OpreX Control and Safety System solutions family. This release delivers enhancements that drastically reduce the amount of work needed to upgrade a control system’s CPU module, including a newly developed utility kit and standards certification for individual CPU modules.