Oil & Gas

FiberSource Active-S
| | | | | | | | | |

FiberSource’s Active-S Humidity Control Sheets Protect Sensitive Equipment

FiberSource now offers Active-S Humidity Control Sheets, a maintenance-free alternative to desiccants, heaters, dehumidifiers, thermostats, hygrotherms, hygrostats, and corrosion inhibitors for preventing excess moisture in cabinets, enclosures, and cases. When humidity in the enclosure is high, the humidity control sheet absorbs the excess moisture, reducing humidity levels inside the cabinet. But when the cabinet becomes dry, the sheet “breathes out” the moisture, maintaining relative humidity at or under 60% in the cabinet.

Weidmuller IO-Link Master Module and Configurator
| | | | | | | | | |

Weidmuller IO-Link Master Module and Configurator

 

Using the IO-Link communication system to connect intelligent sensors and actuators to the controller significantly reduces the amount of time required. Sensors can connect quickly and without any errors using a pre-assembled cable, for example, while automated commissioning is also made possible by means of downloading parameter sets.

 

 

Schneider Electric’s Intelligent Enclosures Streamline Process Automation and Safety System Engineering
| | | | | | | | | | |

Schneider Electric’s Intelligent Enclosures Streamline Process Automation and Safety System Engineering

 

Schneider Electric has revealed the newest generation of its intelligent enclosures for EcoStruxure™ Triconex® safety and EcoStruxure Foxboro® distributed control systems.

 

 

Common Misapplications of Components in Industrial Control Panels
| | | | | | | | | |

Common Misapplications of Components in Industrial Control Panels

 

Each component in an industrial control panel must be properly applied for safe and reliable operation. The application requirements for each component are often quite complex and unique to the component, resulting in erroneous interpretation, leading to improper use of the component. We will review some of the most common misapplications of components within the panel. UL 508 switches Listed as a “manual motor controller” are designed to be used for the on/off or manual motor controller function to meet NEC requirements in Article 430, Part VII.

 

B&R products speak OPC UA over TSN
| | | | | | | | | | | | | |

B&R products speak OPC UA over TSN

 

B&R is among the first manufacturers to launch a comprehensive portfolio for communication using the open, real-time capable OPC UA over TSN protocol. With high-performance X20 PLCs, bus controllers, industrial PCs and a TSN machine switch, B&R enables fully standardized networks for modular, adaptive machines. Truly economical batch-size-one production is now a reality.

 

 

AutomationDirect DLO Heavy Duty Cable
| | | | | | | | |

Heavy Duty Power Cable from AutomationDirect

AutomationDirect has developed a heavy duty power cable that can be cut-to-length to meet application requirements. Suitable for use in both wet and dry environments, the DLO Heavy Duty Cable is extremely flexible with a tight bend radius that allows easy installations in tight spaces.

Mitsubishi Electric WXGA TFT-LCD module
| | | | | | |

Mitsubishi Electric Launches 12.1-inch WXGA Color TFT-LCD Modules

Mitsubishi Electric has developed a 12.1-inch wide extended graphics array (WXGA) color TFT-LCD Module designed for use in harsh outdoor environments. The high-resolution (WXGA) screen featues a super-wide viewing angle of 176 degrees and is capable of handling dense text and images.

WATCONNECT Series C1
| | | | | | | | | |

Watlow’s Control Panels Incorporate Thermal Components in a Small and Simple Package

Watlow’s WATCONNECT® SERIES C1 Control Panels incorporate high-quality thermal components in a small and simple package. The SERIES C1 is a single-phase, non-hazardous location control panel that can be quickly configured for one or two loops.

bfgnbf.jpg
| | | | | | |

Equipto Electronics Equipment Rack Enclosure Protects Data up to 40Ghz

Offering EMI/RFI shielding from the RF range through the microwave Ka Band, the Ka Shield™ equipment rack enclosure from Equipto Electronics protects communications and data up to 40GHz. With shielding effectiveness of over 75 dB at 40 GHz, the enclosure has been designed to protect the most sensitive equipment from any signal intrusions or leakage. 

Turck Improves Programming Environment for I/O Devices with ARGEE 3
| | | | | |

Turck Improves Programming Environment for I/O Devices with ARGEE 3

TURCK has launched the ARGEE 3 programming environment for its I/O devices to improve the user experience. The enhanced ARGEE programming environment is used to program logic functions inside its multiprotocol I/O devices, making them field logic controllers (FLCs). The ARGEE environment is accessible via an HTML5-compatible web browser, which eliminates the need for complex third-party software or any licensing common with PLCs.

AB-CO PURGE AP-01Z-02 Z-Type System Designed Specifically for Small Electrical Enclosures
| | | |

AB-CO PURGE AP-01Z-02 Z-Type System Designed Specifically for Small Electrical Enclosures

 

The AB-CO PURGE Model AP-01Z-02 Purge and Pressurization System is a Z-Type system designed specifically for small electrical enclosures with volumes up to 2 cubic feet (0.056 cubic meters). As a Z-Type purge and pressurization system, the Model AP-01Z-02 reduces the classification within the electrical enclosure used in a Class I, Division 2 (Groups A,B,C,D) and Class II, Division 2 (Groups F&G) hazardous environment from Division 2 to unclassified.