Designed to operate in hazardous environments, the BC-6964 Battery Charger from Applied Power Systems provides seamless transition from a voltage source to current limit operation for optimum battery charging.
The Hammond Power Solutions Titan X encapsulated transformers is optimized for hazardous and harsh locations. It complies with IEC standards and is certified for IECEx Equipment Scheme, also meeting the ATEX Equipment Directive.
TE Connectivity (TE) P-Clamp provides a light, fast, and efficient solution to mounting cable harnesses. (10) TE P-Clamp sizes cover the full cable diameter range of (21) AS21919 P-Clamp sizes. Faster install times and lighter weight, give TE P-Clamps a lower applied cost than standard AS21919 P-Clamps.
NKK Switch has enahcned its popular M Series with the introduction of a IP67 rated knurled toggle. The new toggle features a knurled, textured lever that enables a firm nonslip grip.
Belden expands the Hircschmann OCTOPUS family to include IP65/IP67 waterproof and dust-tight switches that allow fail-safe networks to be installed in a variety of application scenarios, even under the most difficult conditions.
Roxtec single and multi-cable transits protect against harsh environmental conditions. The CF 16 AISI stainless steel cable transists are designed to provide IP69K, IP67 or IP66 ratings in a small package. The cable transits are ideal for modern connected machine builders, smart factories, and more.
Pepperl+Fuchs introduced the latest addition to its market-leading portfolio of purge and pressurization solutions at this year’s SPS fair in Nuremberg. The Bebco EPS® 6100 series was specially designed for use with large motors, drives, compressors, and enclosures in ATEX/IECEx Zone 1 hazardous locations. The largest purge and pressurization system available from Pepperl+Fuchs to this day, the automatic 6100 series system can purge enclosures that are larger than 12.2 m³ (450 ft³). This new system is ideally suited for applications in the chemical, petrochemical, and oil and gas industries.
Pepperl+Fuchs has expanded its ultrasonic sensor family with a new, more modular model for increased design flexibility. The UCC*-50GK ultrasonic sensor simplifies integration, and can even be integrated into an application without a PLC and transfer data directly to the IoT cloud.
FiberSource now offers Active-S Humidity Control Sheets, a maintenance-free alternative to desiccants, heaters, dehumidifiers, thermostats, hygrotherms, hygrostats, and corrosion inhibitors for preventing excess moisture in cabinets, enclosures, and cases. When humidity in the enclosure is high, the humidity control sheet absorbs the excess moisture, reducing humidity levels inside the cabinet. But when the cabinet becomes dry, the sheet “breathes out” the moisture, maintaining relative humidity at or under 60% in the cabinet.
B&R is among the first manufacturers to launch a comprehensive portfolio for communication using the open, real-time capable OPC UA over TSN protocol. With high-performance X20 PLCs, bus controllers, industrial PCs and a TSN machine switch, B&R enables fully standardized networks for modular, adaptive machines. Truly economical batch-size-one production is now a reality.
AutomationDirect has developed a heavy duty power cable that can be cut-to-length to meet application requirements. Suitable for use in both wet and dry environments, the DLO Heavy Duty Cable is extremely flexible with a tight bend radius that allows easy installations in tight spaces.
Offering EMI/RFI shielding from the RF range through the microwave Ka Band, the Ka Shield™ equipment rack enclosure from Equipto Electronics protects communications and data up to 40GHz. With shielding effectiveness of over 75 dB at 40 GHz, the enclosure has been designed to protect the most sensitive equipment from any signal intrusions or leakage.
The AB-CO PURGE Model AP-01Z-02 Purge and Pressurization System is a Z-Type system designed specifically for small electrical enclosures with volumes up to 2 cubic feet (0.056 cubic meters). As a Z-Type purge and pressurization system, the Model AP-01Z-02 reduces the classification within the electrical enclosure used in a Class I, Division 2 (Groups A,B,C,D) and Class II, Division 2 (Groups F&G) hazardous environment from Division 2 to unclassified.
Orion Fans has expanded its DC axial fan product family with the addition of nine new IP68-rated series. Offering protection from dust and water, the IP68-rated DC fans are designed for a wide range of harsh environment applications.
Laird Thermal Systems’ highly efficient thermoelectric assemblies (TEAs) significantly improve performance and lowers operating costs of applications in rugged outdoor environments. Designed for applications like outdoor kiosks, battery backup cabinets, enclosures, and electronic cabinets, the Outdoor Coolers run at nominal voltages at either 24 or 48 VDC and offer dependable cooling capacities ranging from 100 to 480 Watts.
