LÜTZE presents four new OCT combined supply cables for use in drag chains manufactured to the Beckhoff Standard. In addition to the LÜTZE prefabricated cables with a conductor gauge of 1.0 mm2 available to date, there are now three further cables available with conductor gauges of 1.5 mm2, 2.5 mm2 and 4 mm2 for the types ZK4500 and the new ZK4800. The LÜTZE OCT hybrid cables include engine supply, brake and digital feedback.
AutomationDirect has added Quabbin commercial Ethernet and data cables to provide more choices for your wiring/cabling needs. The new 26 and 24 AWG commercial Ethernet cables are available in Cat5e/6/6a/6e types, in shielded and unshielded versions, and they are suitable for applications from 10 Base-T to 1000 Base-T (Gigabit Ethernet). These cables feature a round, smooth design for added flexibility that allows easy manipulation between devices during installation and routing.
The 4mm shrouded sockets which can mate with both safety shrouded and unshrouded plugs, and are suitable for a wide range of applications including industrial, medical, music industry, instrumentation, and more.
Bidirectional and regenerative programmable DC power series includes over 180 new models offering a greater range of power from 0 – 600 W to 0 – 30 kW.
Motors in conveyor systems need to be switched off safely, but the wiring and energy distribution involved is usually very complex, involving bulky cable trays, and complex distribution boxes. As a result, Wieland Electric has developed a new motor starter that reduces the complexity of installation and improves the safety of conveyor systems. The podis MS 5HP is a compact, robust and user-friendly drive component with an integrated STO (Safe Torque Off) function.
Allied Electronics & Automation now offers Banner Engineering’s Snap Signal portfolio of modular, brand agnostic, plug-and-play IIoT solutions, including the new Snap Signal DXMR90 industrial controller. Banner’s Snap Signal solutions are designed to leverage machine data from automation islands scattered throughout the factory floor, convert disparate data signals from both condition monitoring and process monitoring solutions into a unified protocol and transmit that insightful diagnostic data to a dedicated PLC or SCADA control system for local processing or an edge device used to monitor equipment conditions in the cloud.
With the PDP67 modules, Pilz offers solutions for decentralised applications directly in the field. Protection type IP67 means that the modules are resistant to dirt and water. The decentralised modules optimise installation and wiring work. They save time, money and space in the control cabinet. As they are integrated into dirt and water-repellent IP67 housings, the PDP67 modules reliably ensure safety even in rugged industrial environments.
Introducing Hammond Manufacturing’s hole plugs, designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water, with a standard pushbutton size of 30.5mm and a mini pushbutton size of 22.5mm. These hole plugs come in two variations; steel and stainless steel. Steel hole plugs are available in 12 sizes, while the stainless steel are available in 8 sizes.
The new Industrial Gateway Communications Device by Weidmuller is a solution for interference-free data transmission over long distances. It is a single solution for connecting multiple devices, across multiple protocols. In systems where the installed base includes Industrial Ethernet and/or serial protocols, establishing communication across devices is critical and upgrading the equipment isn’t always feasible.
The compact Littelfuse Industrial Shock Block SB5000 protects workers from electrical shock and is a 208 V Class A ground-fault circuit interrupter (GFCI). This allows commercial kitchens, construction sites, and other non-dwelling units with wet areas to meet NEC 210.8(B) now for their three-phase loads up to 60 A. This personnel protection device is also designed to meet the requirements for special-purpose Class C and D GFCIs defined by UL 943C for industrial facilities.
The TX CableNet is “Simply. Perfection”. The new IT rack is Rittal’s future-proof solution for all users who expect “best in class” functionality and total quality, i.e. a network rack which satisfies all requirements by covering all the bases. Rittal combines years of experience with extensive working knowledge of network infrastructures in this truly exceptional solution.
Allied Electronics & Automation supplies hardware for Phoenix Contact’s new PLCnext Edge Gateway software, a state-of-the-art IIoT edge computing solution designed for data collection in demanding industrial and manufacturing environments. The new PLCnext Edge Gateway software is the latest addition to Phoenix Contact’s PLCnext Technology platform and enables industrial automation and control customers to transmit data from any industrial system to any cloud without having to invest capital to adapt legacy infrastructure.
AutomationDirect has added Gladiator GCB series molded case circuit breakers to their lineup of circuit protection devices. Gladiator MCCBs are designed to reliably protect circuits and equipment from thermal overloads, short circuits, and ground faults. Available in two or three-pole configurations, these high-performance circuit breakers are offered in seven frame sizes up to 1200A with a selection of trip units and up to a 100kA interrupting capacity.
AutomationDirect has added WAGO Pro2 power supplies to their growing lineup of performance power products. These high-efficiency power supplies reduce losses, save cabinet space, and increase energy savings. With TopBoost, PowerBoost, and parameterizable overload behavior, WAGO Pro2 power supplies protect equipment and provide intelligent current and switching modes.
New 8-Inch touch panel display can control up to six Acuity laser sensors and display their distance readings.
