Healthcare

SCHURTER: DG11/DG12 Series Classic Power Entry Module with Circuit Breaker Gets Even Better
| | | | | | |

SCHURTER: DG11/DG12 Series Classic Power Entry Module with Circuit Breaker Gets Even Better

SCHURTER series DG11 and DG12 with and without mains filter features a first-of-its-kind ingress protection solution for IEC inlets, consisting of a seal gasket between the connector and mating V-Lock power cord. The blue colored latch of the V-Lock power cord and blue inlay of the appliance inlet indicate that the two have been equipped to provide an IP54 rating under load. The unit is screw mounted and rated IP67 between the power entry module and the panel.

Fischer: Core First Mate Last Break Connectors Ensure Electrical Safety and Mechanical Reliability for Medical Devices
| |

Fischer: Core First Mate Last Break Connectors Ensure Electrical Safety and Mechanical Reliability for Medical Devices

Fischer Connectors has released new First Mate Last Break connectors in its low-voltage multipole Fischer Core Series, to offer outstanding levels of electrical safety, mechanical reliability and ease of use for operators of medical devices in compliance with IEC 60601-1. As its name denotes, First Mate Last Break (FMLB) ensures the permanent ground presence of an electrical system through a longer pin in the plug that “mates first and breaks last” with the system’s receptacle to avoid risky electrical safety conditions.

EAO: Series 82 with Cable Connection
| | | | | | | | |

EAO: Series 82 with Cable Connection

EAO has extended the robust Series 82 with a new product variant with vibration-resistant cable connections. It is common to expose pushbuttons and indicators to extremely harsh operating conditions. For example in the food and beverage industry, where alkaline cleaning agents and corrosion severely affect HMIs. In addition, external factors in the form of hard-to-remove dirt, fine dust, along with severe vibrations and blunt impacts also require HMIs to offer a very high level of resistance.

Hammond Manufacturing: 1486 Series Type 4/12 Wiring Trough
| | |

Hammond Manufacturing: 1486 Series Type 4/12 Wiring Trough

Introducing the 1486 series Type 4/12 wiring trough from Hammond Manufacturing, which is designed to enclose and protect multiple wiring junctions from dirt, dust, oil and water. This wiring trough complies with standards UL 870 and CSA for types 1, 12 and 4, as well as NEMA type 12 and 4, and IEC 60529 and IP66. This product is formed with 12 gauge steel, with smooth continuously welded seams, and has a butt-hinged cover that is secured with easily operated stainless steel screw clamps.

RS Adds 3 New Quality-Centric Component Suppliers
| | | | | |

RS Adds 3 New Quality-Centric Component Suppliers

RS, a trading brand of RS Group plc is adding three new quality-centric component suppliers to its line card of more than 700 trusted suppliers. Adam Tech offers a wide range of electromechanical components, cable assemblies, and custom component solutions designed, engineered, and manufactured to deliver the highest quality at the best possible price. Switch Components,…

Littelfuse: Negative Temperature Coefficient (NTC) Thermistors 
| | | | | | |

Littelfuse: Negative Temperature Coefficient (NTC) Thermistors 

September 7, 2023 Littelfuse has developed a negative temperature coefficient (NTC) thermistor series to detect and measure heat or thermal energy and convert it into an electrical signal to monitor applications. The new, in-stock supply, with an easy-to-use temperature sensor part selector, offers fast delivery to meet customer needs. These thermistors are used in a variety of applications…

Soft-Touch Lacquers
| | |

OKW: New Transparent Soft-Touch Lacquer Offers Huge Range Of Color Options

OKW has launched a new transparent soft-touch lacquer – enabling designers to specify a ‘velvet’ finish for its plastic enclosures and tuning knobs in any color. The new lacquer is ideal for a wide range of OKW enclosures and potentiometer knobs, notably those used for handheld and wearable electronics. OKW’s soft-touch lacquer was originally available only in a black finish that can be applied directly to the primer. But the new transparent lacquer allows any color beneath it to shine through – offering electronics designers a huge choice of options.

Bel Fuse: MEPG300/MEPG500 AC-DC Switching Power Supplies – New Efficient GaN Power Technology Extension
| |

Bel Fuse: MEPG300/MEPG500 AC-DC Switching Power Supplies – New Efficient GaN Power Technology Extension

Bel Fuse Inc has recently announced the expansion of the EOS Power Series with the addition of MEPG300 and MEPG500 devices, designed specifically for medical applications and based on new, efficient Gallium Nitride (GaN) technology. The MEPG300 and MEPG500 are convection-cooled units, eliminating the need for fan maintenance and removing unnecessary audible/ambient noise and vibration, which can be unsuitable for a variety of medical applications.

IDEC: New RC Series PCB Relays – Industrial-Grade Power Handling in a Low-Profile Form Factor
| | | | |

IDEC: New RC Series PCB Relays – Industrial-Grade Power Handling in a Low-Profile Form Factor

IDEC Corporation has recently announced the release of their new RC Series printed circuit board (PCB) relays, with features supporting a wide range of industrial-grade applications. These relays come in several low-profile configurations, provide high-capacity power switching, and perform reliably even in challenging environments. The RC Series replaces and upgrades the proven RJxV Series PCB mount relays.

Fibox Partners with Jameco Electronics to Introduce High-Quality Indoor and Outdoor Enclosures
| | | | | |

Fibox Partners with Jameco Electronics to Introduce High-Quality Indoor and Outdoor Enclosures

July 28, 2023 Fibox is excited to announce its collaboration with Jameco Electronics, a trusted source of electronic components and tools. As part of this partnership, Fibox’s superior-quality enclosures will now be available in Jameco Electronics’ line card, offering customers a comprehensive range of top-notch solutions for their electronic equipment protection needs. Designed for a…

Will Industrial HMIs go touchless?
| | | | | | | | | |

Will Industrial HMIs go touchless?

July 17, 2023 Human-machine interfaces (HMIs) are a crucial component of industrial control systems, as they allow operators to interact with and monitor the performance of industrial equipment. In recent years, there has been a growing interest in touchless technology, which eliminates the need for physical contact between the operator and the interface. This technology…

METCASE: TECHNOMET Instrument Enclosures Now with Flat or Sloping Front Panels
| | | |

METCASE: TECHNOMET Instrument Enclosures Now with Flat or Sloping Front Panels

METCASE’s premium TECHNOMET desktop/portable instrument enclosures can now be specified with or without a sloping front for easier viewing. Highly attractive TECHNOMET is ideal for medical and wellness devices, industrial control, test and measurement, peripheral devices and interfaces, switchboxes, communications and laboratory equipment. These advanced aluminum enclosures feature a modern and cohesive design. Diecast aluminum bezels at the front and rear fit flush with the main case body. Snap-on trims hide the case and front panel fixing screws.

PULS Power: CP20.241-M1 DIN Rail Power Supplies for 1-Phase System 24V, 20A
| |

PULS Power: CP20.241-M1 DIN Rail Power Supplies for 1-Phase System 24V, 20A

The CP20.241-M1 is a DIN rail mountable single-phase input power supply for use in industrial and medical equipment. It provides a stable and galvanically separated SELV/PELV output voltage. The specialty of this power supply is the 2MOPP (two means of patient protection) safety approval for medical use and the fulfillment of the required EMC tests for professional healthcare facility and home healthcare environments. The CP-Series is part of the DIMENSION power supply family. The most outstanding features of CP20.241-M1 are the high efficiency, advanced inrush current limitation, active PFC and the wide operational temperature range.

SCHURTER: New Touchless Hidden Switch (THS) is Concealed Behind Surface
| | | | |

SCHURTER: New Touchless Hidden Switch (THS) is Concealed Behind Surface

SCHURTER introduces the innovative THS switch series with optical sensor technology that can be concealed behind any surface without the need for mounting holes. A small opening in the user interface is all that is needed to allow the ToF sensor to actuate. Equipment and appliances used in public areas has created demand for non-contact switches to replace conventional touch-activated switches. The THS is a touchless switch that provides an excellent hygienic solution to prevent the spread of pathogens.

binder: New 720/770 Series Angled Connectors
| | | | |

binder: New 720/770 Series Angled Connectors

binder has complemented its 720 and 770 product series by field-attachable angled variants. Such compact angled connectors are used in device, building, and plant engineering: Particularly where secure electrical connections need to be established in confined spaces, the angled versions of the 720/770 series with snap-in or bayonet locking provide a reliable and space-saving alternative to the straight versions.