Data & Security

PBUS-25-Stober-SC6Series-400.jpg
| | | |

STOBER: SC6 Series

STOBER’s more compact version for the encoderless Lean motor. The compact stand-alone SC6 drive controller allows for sensorless control of STOBER LM series Lean motors. These motors provide energy efficiency at the performance level of a synchronous servo motor. They also guarantee high investment protection, thanks to energy efficiency class IE5 and the corresponding higher efficiency compared to IE4 asynchronous motors.

 

 

 

PBUS-25-IMO-BPSSeries-400.jpg
| | | |

IMO: BPS Series 15W – 240W AC-DC DIN Rail Power Supplies

IMO Precision Controls BPS Series 15W-240W AC-DC DIN Rail Power Supply Units deliver high efficiency and are subjected to a 100% full load burn in testing. The BPS Series delivers short circuit protection and a universal output of 90-264VAC/ 120-375VDC, and comes with a back-up parallel connection.

 

 

 

PBUS-25-Hammond-RackCabinet-400.jpg
| | | | |

Hammond Manufacturing: Swing-Out Sectional Floor/ Wall Mount Rack Cabinet

Hammond Manufacturing’s Swing-Out Sectional Floor/ Wall Mount Rack Cabinet HWF Series with 500lb capacity is available in 3 heights. Each one features optional doors that install in minutes and are available in vented, tinted window and solid. The top of the rear section includes a 3U cutout for optional rack mount fans or accessory mounting, and the main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.

 

 

 

PBUS-25-Bristol-338SeriesMeter-400.jpg
| | | |

Bristol Instruments: 338 Series Optical Wavelength Meter

The 338 Series Optical Wavelength Meter from Bristol Instruments combines speed and affordability to address the most important requirements of optical transceiver manufacturers. The model 338 has a high measurement rate of 25 Hz that results in reduced testing times and greater production throughput. And, its affordable price point, along with a five-year warranty, provides the lowest cost of ownership compared with similar systems.

 

 

 

PBUS-25-Cembre-4mmPushInMarkers-400.jpg
| | | | |

Cembre: Precut 4mm Push in Markers, for PMF Holders

SerieFLAT MG-TPMF tags are used for marking cables, conduit, tubes, conductors and components. Presented in stem format, tags are simply snapped off their stems and inserted into the appropriate holders. Consult Cembre for other colours. Compliance is checked by inspection and by rubbing the marking by hand for 15 s with a piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with hexane.

 

 

 

PBUS-25-Molex-RFCableAssemblies-400.jpg
| | |

Molex: RF Cable Assemblies

Whether you’re designing an RF Cable Assembly for smaller spaces, high-vibration environments or another challenging application, Molex has the expertise to develop high-quality, custom cable assemblies that ensure reliability and performance. Molex RF connector designs can accommodate standard RG braided cables, micro coax, semi-rigid cable, vendor-specific custom cables, LMR types and hand conformable cable assemblies.

 

 

 

PBUS-25-Phoenix-TERMITRAB-400.jpg
| |

Phoenix Contact: Protection for Telecommunications Applications

Phoenix Contact’s protective devices in the TERMITRAB complete product family provide a high level of protection against overvoltages in a minimum amount of space. With the TTC-6-1×2-TELE devices, two new product variants are now available for fast VDSL applications with data transmission speeds up to 300 Mbps. The products are specifically tailored to the requirements for data transmission with Super Vectoring.

 

 

 

PBUS-25-Bel-Cat6aCableSplicer-400.jpg
| | | |

Quick Ethernet Connections With the Cat 6a Cable Splicer

Stewart Connector, a Bel group company, recently announced the release of their tool-less Cat 6a Cable Splicer. Stewart Connector’s cable splicer is a time-saving solution for Ethernet connections that require field terminations. The cable splicer is designed to create easy connections between patch cables and installation cables for consolidation point applications or for end-to-end links.

 

 

 

PBUS-25-SCHURTER-UMTHSurfaceMountFuse-400.jpg
| | | | | |

SCHURTER: UMT-H Surface Mount Fuse Is Petite and Powerful up to 50 A

SCHURTER’s prominent UMT-H surface mount ceramic fuse family now includes 40 A and 50 A current ratings with an impressive breaking capacity rating of 500 A at 125 VAC / 72 VDC. The series provides unprecedented overcurrent and short circuit protection performance in a package size of 5.3 x 16 mm. The UMT-H was originally developed to provide a smaller alternative to through-hole mounted 5 x 20 mm cartridge fuses, commonly used for primary circuit protection.

 

 

 

PBUS-25-Rittal-DataCentreCooling-400.jpg
| | |

Equipment Cooling for Data Centres & Plants: Why Your HVAC SYSTEM is a Poor Climate Control Unit

Data Centre and Plant Managers working in small and mid-sized businesses often find themselves searching their buildings for unused space to house the company’s IT and other enclosures. Mailrooms, empty offices, janitors’ closets…all have been repurposed into data closets holding one to a few racks. This approach may be the right choice in terms of square footage needed, but when it comes to proper climate conditions for sensitive IT equipment, it could not be more wrong.

 

 

 

PBUS-25-Southco-M5MagneticDoorCatches-400.jpg
| | | | | |

Attractive New M5 Magnetic Catches From SOUTHCO Hold Panels and Doors in Place

SOUTHCO has recently introduced the latest product in its successful line of magnetic catches, with a new version that combines strength and style. Constructed of corrosion resistant stainless steel, the M5 Magnetic Catch combines a highly polished finish with the holding power of rare earth magnets to provide a robust and attractive solution for keeping doors and panels open or closed.

 

 

 

PBUS-25-Stego-CS028FanHeater-400.jpg
| | | | |

Stego CS 028 Fan Heater

Struggling to have proper heat distribution within your enclosure? Don’t let temperature and condensation derail your mission-critical applications. STEGO is here to help with a wide array of FAN HEATERS that are available in both AC and DC variants. These high-performance heaters are designed to distribute heating power evenly and consistently throughout the whole enclosure. This series of STEGOs heaters are ideal for enclosures where space is at a premium.

 

 

 

PBUS-25-Bel-QuickConnectAdaptors-400.jpg
| | | | | |

Quick Connect Adapters Expansion for Improved Rapid Testing

Cinch Connectivity Solutions, a Bel group company, now offers a 2.92mm Quick Connect Adapter and High Frequency SMA Quick Connect Adapters, designed to adapt from a standard threaded jack to a Quick Connect Plug. These adapters are designed to allow for rapid test connections to devices using 2.92mm and SMA connectors, resulting in a more efficient testing process by reducing the time and effort required to connect and disconnect the test cable.

 

 

 

PBUS-25-Leviton-LCUnibodyFiberConnectors-400.jpg
| | |

Leviton Launches New LC Unibody Fiber Connector with Spectro-Link Technology, Developed from Customer Feedback

Leviton recently unveiled a new LC Unibody Fiber Connector engineered with Spectro-Link Technology, enhancing its offering of fiber trunks, harnesses and patch cords. This new technology will enable data center operators and enterprise network managers to better perform in higher density, extended reach environments, with an increasing number of physical connections.

 

 

 

PBUS-25-binder-M16ConnectorLineup-400.jpg
| | | | |

binder: M16 Connectors – The “Go to” Connector for High Pin Count Applications

binder has recently made key additions to its M16 connector series. They are versions that meet the very high data speeds required by the latest sensor-based automation systems and an ASIG-compliant model used in wireless networks including 5G. binder has been at the forefront of M16 connector development since the 1970s working to widen the range of applications for these versatile circular connectors.

 

 

 

PBUS-25-Phoenix-EnergyStorageConnectors-400.jpg
| | | | | |

Phoenix Contact: Connectors for Energy Storage

With the new plug-in battery connections, Phoenix Contact provides you with a time-saving and safe connection technology for energy storage systems. The range includes connectors for busbar connection and battery pole connectors for applications of up to 1,500 V. Connectors for connecting to the busbar simplify the installation of plug-in systems in energy storage systems. The connectors with reverse-polarity protection are plugged onto the rear side of a storage system, eliminating the need for wiring work.