Automotive

PBUS-25-Rockwell-Stratix5800Switch-400.jpg
| | | |

Rockwell Automation Prepares Plant Networks for Future Demands with New Managed Switch

Companies can prepare their production facilities for more demanding, data-intensive networking with the new high-performance, all-gigabit Allen-Bradley Stratix 5800 managed industrial Ethernet switch . The switch supports layer 2 access switching and layer 3 routing for use in multiple layers of the architecture. Robust security capabilities and ISA/IEC 62443-4-2 certification help enhance network security.

 

 

 

PBUS-25-Cembre-4mmPushInMarkers-400.jpg
| | | | |

Cembre: Precut 4mm Push in Markers, for PMF Holders

SerieFLAT MG-TPMF tags are used for marking cables, conduit, tubes, conductors and components. Presented in stem format, tags are simply snapped off their stems and inserted into the appropriate holders. Consult Cembre for other colours. Compliance is checked by inspection and by rubbing the marking by hand for 15 s with a piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with hexane.

 

 

 

PBUS-25-Wohner-MOTUSC14MotorStarters2-400.jpg
| | | |

Wöhner Presents Groundbreaking Motor Starters MOTUS C14 Based on C14-Technology

With the motor starters of the MOTUS C14 series from Wöhner, short circuits become less scary. If an error occurs, the electronics switch off the motor within a maximum of 10 microseconds. This means that the MOTUS C14 reacts faster than any fuse and this with a low I2t value. By comparison, the reaction time of a conventional fuse-link is about 2,000 microseconds. With a circuit breaker, the switch-off time in case of a fault is even 5,000 microseconds.

 

 

 

PBUS-25-Pepperl-IUT-F190-B40UHF-400.jpg
| | |

IUT-F190-B40 UHF Read/Write Head with Integrated Industrial Ethernet Interface and REST API Expands the Pepperl+Fuchs RFID Portfolio

Pepperl+Fuchs is expanding its comprehensive portfolio of identification solutions with the introduction of the IUT-F190-B40 UHF RFID read/write head, which offers an integrated industrial Ethernet interface and REST API. Using these interface technologies, the IUT-F190-B40, which is designed for medium detection ranges, can be quickly and easily integrated into OT and IT systems.

 

 

 

PBUS-25-Balluff-ETHERCAT-400.jpg
| | |

Balluff: Powerful Technology for Full Flexibility

Outstanding performance, low costs, flexible topology and easy handling: these are the advantages of the industrial Ethernet technology, EtherCAT. EtherCAT provides full flexibility: a free topology selection, the possibility of connecting and disconnecting devices and segments during operation, and the performance redundancy of the ring topology. EtherCAT is suitable for both centralized and decentralized architectures, supports Master/Slave, Master/Master, and Slave/Slave communication.

 

 

 

PBUS-25-Dold-UG6946StandstillMonitor-400.jpg
| | | |

DOLD: Safe Sensorless Standstill Monitoring

The safe sensorless standstill monitor UG 6946 from the SAFEMASTER S series detects the standstill of 3-phase and 1-phase motors independent of the direction of rotation. This means sensors such as encoders or proximity switches are not required. Access to the danger zone of a system is only possible by the enabling signal of the standstill monitor after the drive has been switched off and run down.

 

 

 

PBUS-25-Excelitas-dfineInspectionLens-400.jpg
| | |

Excelitas Technologies Introduces New LINOS d.fine HR Area Scan Module

Excelitas Technologies Corp. recently announced the LINOS d.fine HR Area Scan Module, which enables area scan applications for the company’s d.fine HR 2.4/128 3.33x High Resolution Inspection Lens. The combination of d.fine HR Lens and new Area Scan Module features a large image circle up to 82 mm and a high resolution up to 300 Lp/mm in a spectral distribution of 400 nm – 750 nm.

 

 

 

PBUS-25-Phoenix-SUNCLIX-400.jpg
| | | | |

Phoenix Contact: New Connectors for Photovoltaics

New connectors as well as cable-based string fuses extend the SUNCLIX product series for photovoltaic systems from Phoenix Contact. The device connectors are particularly suitable for cabling inverters and string combiner boxes. The fast screw connection saves you time and money during installation. A patented Unlock system enables smaller actual dimensions as well as convenient release without the need for a special tool.

 

 

 

PBUS-25-SCHURTER-UMTHSurfaceMountFuse-400.jpg
| | | | | |

SCHURTER: UMT-H Surface Mount Fuse Is Petite and Powerful up to 50 A

SCHURTER’s prominent UMT-H surface mount ceramic fuse family now includes 40 A and 50 A current ratings with an impressive breaking capacity rating of 500 A at 125 VAC / 72 VDC. The series provides unprecedented overcurrent and short circuit protection performance in a package size of 5.3 x 16 mm. The UMT-H was originally developed to provide a smaller alternative to through-hole mounted 5 x 20 mm cartridge fuses, commonly used for primary circuit protection.

 

 

 

PBUS-25-Siemens-SIRIUSACTIDKey-400.jpg
| | | |

Siemens: Control the Speed Directly on the Machine With SIRIUS ACT ID Key-Operated Switches

The easiest way to control the speed directly on the machine is to use an analog potentiometer. However, wearing gloves in dusty or humid environments, for example, makes operation more difficult. Therefore, the use of the robust SIRIUS ACT ID key-operated switch as a digital potentiometer is particularly suitable under these environmental conditions. This alternative with freely programmable IO-Link electronic module enables precise and fine-grained speed adjustment due to its tactile detent positions.

 

 

 

PBUS-25-Southco-M5MagneticDoorCatches-400.jpg
| | | | | |

Attractive New M5 Magnetic Catches From SOUTHCO Hold Panels and Doors in Place

SOUTHCO has recently introduced the latest product in its successful line of magnetic catches, with a new version that combines strength and style. Constructed of corrosion resistant stainless steel, the M5 Magnetic Catch combines a highly polished finish with the holding power of rare earth magnets to provide a robust and attractive solution for keeping doors and panels open or closed.

 

 

 

PBUS-25-Stego-CS028FanHeater-400.jpg
| | | | |

Stego CS 028 Fan Heater

Struggling to have proper heat distribution within your enclosure? Don’t let temperature and condensation derail your mission-critical applications. STEGO is here to help with a wide array of FAN HEATERS that are available in both AC and DC variants. These high-performance heaters are designed to distribute heating power evenly and consistently throughout the whole enclosure. This series of STEGOs heaters are ideal for enclosures where space is at a premium.

 

 

 

PBUS-25-Bel-QuickConnectAdaptors-400.jpg
| | | | | |

Quick Connect Adapters Expansion for Improved Rapid Testing

Cinch Connectivity Solutions, a Bel group company, now offers a 2.92mm Quick Connect Adapter and High Frequency SMA Quick Connect Adapters, designed to adapt from a standard threaded jack to a Quick Connect Plug. These adapters are designed to allow for rapid test connections to devices using 2.92mm and SMA connectors, resulting in a more efficient testing process by reducing the time and effort required to connect and disconnect the test cable.

 

 

 

PB-43-BR-PowerPanelC80-400.jpg
| | | | | |

B&R Automation: Switch It on and Get Started

The new Power Panel C80 offers the combined advantages of a powerful controller and a modern operator terminal in a single HMI device. The C80 installation is compatible with B&R Automation Panels. Machine builders thus have full flexibility when using the new panel and can scale their machine to meet changing performance and cost requirements. With its low installation depth, the C80 multi-touch HMI is suitable for particularly compact machines where space in the control cabinet is limited.

 

 

 

PBUS-25-binder-M16ConnectorLineup-400.jpg
| | | | |

binder: M16 Connectors – The “Go to” Connector for High Pin Count Applications

binder has recently made key additions to its M16 connector series. They are versions that meet the very high data speeds required by the latest sensor-based automation systems and an ASIG-compliant model used in wireless networks including 5G. binder has been at the forefront of M16 connector development since the 1970s working to widen the range of applications for these versatile circular connectors.

 

 

 

PBUS-25-Phoenix-PTCB-400.jpg
| | | | |

Phoenix Contact: PTCB – Now with Class I, Div. 2 approval

The PTCB circuit breakers from Phoenix Contact are now approved for use in Class I, Division 2 hazardous locations. The entire family is Listed to UL 508 and Recognized to UL 2367. With the new approvals, the narrow circuit breakers meet the stringent requirements for installation in potentially explosive areas in North America. The PTCB family is ideal for 24 V DC applications that require high density and effective protected power distribution to multiple common loads.