Automotive

PB-45-Pilz-SecurityBridge-400.jpg
| | |

SecurityBridge Firewall From Pilz Now Also Protects Automation Networks That Include Devices From Third-Party Suppliers – Open for Manipulation-Proof Communication

With its new firmware, the SecurityBridge firewall now offers comprehensive protection for industrial automation networks. Not only does it protect the configurable safe small controllers PNOZmulti and the automation system PSS 4000, it also now enables control over data communication between any other subscribers outside of the Pilz range. The SecurityBridge was developed in line with the secure development process in accordance with the standard IEC 62443-4-1 and also respects the principle of “Zones and Conduits”.

 

 

 

PBUS-26-Mitsubishi-SCADAGENESIS64-400.jpg
| | |

Mitsubishi Electric Renews SCADA Lineup

Supporting the increasing focus on digital manufacturing and IoT, Mitsubishi Electric has renewed its SCADA lineup, now offering two types of software for system monitoring and process control under the series name “GENESIS64”, replacing the existing “MC Works64” SCADA software. The new lineup will meet the diversifying IoT needs, covering a wide variety of purposes.

 

 

 

PBUS-27-Bourns-DMS22BRotarySensor-400.jpg
| | |

Bourns Announces New Non-Contacting Feedback Rotary Sensor with SSI Output

Bourns, Inc. recently announced its latest non-contacting feedback rotary sensor that features Synchronous Serial Interface (SSI) output providing effective synchronization in closed-loop control systems. This single-turn rotary sensor is based on Hall Effect technology and is supported by a factory programmable electrical angle from 10 to 360 degrees that enables more consistent and dependable operation of up to 50 million shaft revolutions.

 

 

 

PBUS-26-IMO-Contactor-400.jpg
| | |

IMO Precision Controls: Contactors

IMO offers a comprehensive range of high-quality Contactors, suited to a range of applications. Regular switching requirements are more than adequately handled by their proven “Standard” 3 or 4 pole devices, while dedicated designs are available for switching DC loads (PV applications, Capacitor / Battery banks) and low current loads (LED lighting, Vehicles etc.).

 

 

 

PBUS-26-Parker-ISOBUSTeskController-400.jpg
| |

Parker Releases Full-Version ISOBUS Task Controller Software for Agricultural Machinery

Parker Hannifin, a global provider in motion and control technologies, recently expanded its ISOBUS Suite software by launching the full version of the company’s ISOBUS Task Controller (TC) for standardised work management on agricultural vehicles such as tractors, harvesters, and other self-propelled machines. ISOBUS TC functions as a link between FMIS (Farm Management Information System) software and implements controls on the vehicle.

 

 

 

PBUS-26-binder-M12M16RightAngle-400.jpg
| | |

binder Adds Right-Angle Housing Versions to Key M12 and M16 Connectors

binder offers a wide range of M12 and M16 cable connectors within its overall product portfolio. These include the 423, 713, 715 and 825 Series that binder has expanded with a shielded, two-part right-angle housing in the first quarter of 2021. This provides new options to widen the range of applications and increase future demand. binder’s 423, 713, 715 and 825 Series connectors are perfectly suited to applications for miniature connectors in areas like automation engineering.

 

 

 

PB-44-BR-AutomationRuntime-400.jpg
| | | |

B&R Automation: Predict the Failure, Prevent the Loss

B&R’s real-time operating system, Automation Runtime, now automatically logs data about storage media’s health to provide machine operators and service personnel early warnings of impending failure. Storage media can be replaced before a crash causes lost data and costly downtime. B&R is among the first to bring this commercial-grade feature to industrial embedded runtime systems.

 

 

 

PBUS-26-Advantech-WebOP204OT-400.jpg
| | |

Advantech: WebOP-2040T 4.3″ WQVGA Operator Panel with WebAccess/HMI Software

To satisfy the stringent standards required in the automation market, especially packaging, label slitting, and motion-based robot dispensing, Advantech offers the WebOP-2000T series with 200MHz ARM9-based RISC CPU’s and 128MB flash memory for application software. The WebOP-2000T series also support a variety of LCD sizes from 4.3″ to 10.1″ for different applications involving the use of PLCs, motion/thermal controllers, inverters and sensors.

 

 

 

PBUS-26-Omron-K7GEFourPros-400.jpg
| | |

Four Ways That Omron’s New K7GE Helps Minimize Downtime and Improve Productivity

Many manufacturers use time-consuming and potentially dangerous manual processes to inspect servo motors for insulation issues. If this sounds like your company, it might be time to switch over to an automated, remote-based servo motor condition monitoring solution that works around the clock. Omron’s new K7GE remote servo condition monitor is part of their predictive maintenance solution offering that’s designed to help manufacturers minimize downtime without sacrificing productivity.

 

 

 

PBUS-26-binder-M8CableConnectors-400.jpg
| | |

Reliable EMC With 360° Shielding: M8 Cable Connectors for Sensitive Applications

Industry knowledge and experience in industrial circular connectors are both recognized hallmarks of binder. The company operates in many fields of application thanks to its comprehensive range of products the latest of which is a molded M8 circular connector. Part of the 718 Series, the new connector provides high reliability under advanced requirements – even for customized specifications – with a new type of shielding concept.

 

 

 

PBUS-26-Floyd-TwinTurbo-400.jpg
| | | |

Floyd Bell: Twin Turbo

Floyd Bell’s ground-breaking new Twin Turbo Lighted Alarm is a small (approx. 1″x1″) panel-mount piezoelectric audio alert that emits a daylight-viewable bright light when activated, effectively combining Floyd Bell’s popular Turbo series Alarms with Turbo Light Series Panel Indicators into one convenient multi-sensory alarm device. Available in 7 different tone types, the sound output measures up to an impressive 103dB at 2 feet.

 

 

 

PBUS-26-RAFI-RAMO2230-400.jpg
| | | |

RAFI: RAMO 22/30

The RAFI key switch series with mounting hole diameters of 22 and 30 mm is perfect for simple integration in your application. This is ensured even in difficult space conditions, thanks to the low overall height and mounting depth, as well as the RAMO EDGE mounting bracket, which you can use to assemble the operating elements and indicators directly on profiles without an additional housing.

 

 

 

PBUS-25-Allied-AutomationSensors-400.jpg
| | |

Allied Electronics & Automation: A Concise Overview of Common Sensors Used in Automation

In today’s increasingly wired world, sensors take center stage. There are many options when it comes to sensors. Here’s an overview of some categories of industrial sensors used in automation in consultation with Russ Freeman, a product portfolio manager, with Allied Electronics and Automation in Ft. Worth, Texas.

 

 

 

PB-43-EPLAN-eManage-400.jpg
| | |

Cloud Service Meets the Eplan Platform – Eplan eManage: Easily Upload, Share and Manage Projects in the Cloud

The digital transformation of engineering continues advancing. As part of its cloud services, Eplan is presenting a new service for cross-project collaboration – Eplan eManage – which lets users upload Eplan Platform projects into the cloud environment and share and work on them there. The free version was launched in mid-March – an expanded, paid version will follow in August 2021.

 

 

 

PBUS-25-TDK-DBM20BufferModule-400.jpg
| | | |

TDK: 24Vdc 20A DIN Rail Mount Buffer (Hold-up) Module Has a Narrow 49mm Width

TDK Corporation recently announced the introduction of the TDK-Lambda DBM20 DIN rail mount 24V 20A buffer module. The buffer module is ideal for providing short term hold-up or peak power for loads connected to a 24Vdc output AC-DC power supply. It can supply an additional 250ms hold-up at 448W output power, or 2s with a 2.5A load. The extended hold-up time allows equipment to safely shutdown and avoid data loss during AC power interruptions.