Automotive

PBUS-33-Banner-T3OR1515RadarSensor-400.jpg
| | |

Banner Engineering: T30R-1515 Radar Sensors with New Capabilities

Introducing the T30R-1515 radar sensor from Banner Engineering. The 15° × 15° models of the T30R radar sensor can now measure the distance to objects at closer range. While the minimum presence/absence detection range of 150 mm has not changed, the nearfield measurement range has been improved. The sensor can now measure the distance to items as close as 200 mm away (a 100-mm improvement over previous specifications of 300 mm).

 

 

 

PBUS-33-Emerson-StandAlonePowerSupply-400.jpg
| | | |

Emerson Launches Stand-Alone Power Supply with L-Code Connections for Higher Current Output

To better serve the power requirements of global automotive manufacturers, Emerson has expanded its SolaHD™ SCP-X power supply line with a new higher output model supplying 10-Amp, 24 Vdc output capacity. A compact, standalone power solution, the new IP67 SCP-X High Output power supply has “L-Code” connections that enable the use of 5-pin L-Code M12 cables specifically designed for transmitting higher currents, especially in confined spaces.

 

 

 

PBUS-33-EPLAN-FestoServoDrives-400.jpg
| | |

EPLAN Schematic Generation for Festo Servo Drives and Motors Are Now Available via EPLAN eBUILD Free

Complete drive system, consisting of servo drive and servo motor, with seamless connectivity in hardware and software. Servo drive CMMT-AS and servo motor EMMT-AS are connected via a one-cable solution and can be put into operation very quickly and easily using the Festo Automation Suite. Servo drive CMMT-ST for low voltages from 24…48 V DC and 150…300 W continuous power – extremely efficient moving and positioning.

 

 

 

PBUS-33-Phoenix-Contactron-400.jpg
| | | |

Phoenix Contact: CONTACTRON Speed Starter – Bridging the Gap Between Motor Starters and Variable Frequency Drives

The new CONTACTRON Speed Starter from Phoenix Contact offers the critical functions common in a variable frequency drive (VFD) without the complexities. The device requires no drives expertise or software, making it fast and easy to commission. The Speed Starter provides ramp-up and ramp-down functions while the motor is under load, which a soft starter cannot.

 

 

 

PBUS-32-Norstat-SAFE1-1.1-400.jpg
| | | |

Riese SAFE 1 / 1.1: Category 3 Safety Relay for E-stop and Safety Gates

Norstat carries a full line of safety relays that are reliable, cost effective and well suited for most any safety or automation application. The SAFE 1 / 1.1 relay is a high quality, low cost safety relay capable of a safety rating up to a Cat. 3. It features single and dual channel switching technology for emergency stop switches or safety gate monitoring all packaged in a robust, yet compact design.

 

 

 

PBUS-31-Littelfuse-MP8000-400.jpg
| | | |

Littelfuse: Keep Your Distance and Stay Safe – MP8000 Bluetooth Enabled Overload Relay

Introducing the Revolutionary New MP8000 Bluetooth Enabled Overload Relay. This smart, universal relay can communicate directly with your smart phone via Bluetooth. No need to open the control panel. Monitor and control unlimited relays through the Littelfuse App on the smartphone you already own from a safe distance. Monitor and control the MP8000 through the Littelfuse App on your smartphone.

 

 

 

PBUS-31-Mitsubishi-CNCOffsetManagerSoftware-400.jpg
| | | |

Mitsubishi Electric Releases CNC Offset Manager Software

Mitsubishi Electric is announcing the release of its CNC Offset Manager software for remote modification of computerized numerical control (CNC) tool and work offsets. With the push towards automation and central control, machining facilities are searching for more efficient ways to manage their CNC machines. The software can introduce increased efficiency in multiple ways.

 

 

 

PB-48-Automation-MagnetostrictiveTransducers-400.jpg
| | | |

Gefran Magnetostrictive Linear Position Transducers from AutomationDirect

AutomationDirect has added Gefran WPG and WPP series magnetostrictive linear position transducers. These transducers work like other linear position sensors by translating a linear position to an electrical signal. However, they are contactless, which provides a longer life because there is no mechanical wear; since they use magnetostrictive technology, they are also immune to electromagnetic interferences.

 

 

 

PBUS-30-Belden-DataTuffCat6ACables-400.jpg
| | | | |

Belden: DataTuff Cat 6A High Flex Industrial Ethernet Cable

Designed for tight industrial spaces and with best-in-class torsion tolerance, Cat 6A High Flex cables deliver reliable, robust performance for high movement applications in harsh environments. The DataTuff Cat 6A High Flex Industrial Ethernet Cables provide the reliable, high performance data transmission needed in today’s highly automated industrial operations.

 

 

 

DCS-27-Sealcon-TwilockSConnectors-400.jpg
| | | |

Sealcon Twilock-S Circular Connectors Makes “Child’s Play” Out of Difficult Access Areas

The Sealcon Twilock-S connection system is an extremely simple and highly reliable quick fastening system. Sealcon’s Twilock-S metric circular plug-in connectors mate to Speedtec by Intercontec/TE Connectivity making adaptivity between these two connector systems technically possible. All it takes is just one click, a slight twist and the plug-in system goes from “Open” to “Close”; making it child’s play to plug in a connector even where access is quite difficult.

 

 

 

PBUS-29-Bel-CableAssemblies-400.jpg
| | | |

Bel Fuse: Flexible Cable Assemblies for Test Laboratories and 5G Communication

Cinch Connectivity Solutions, a Bel group company, today announces the immediate stock availability of Semflex high performance flexible test cable assemblies. The flexible HPI Series of RF cable assemblies are built with a stranded center conductor and a polyurethane jacket for added flexibility, making this series an ideal solution for test labs that may require frequent bending and everyday handling of the cables during test procedures.