Industrial Control Panels and the Panel Shop Program

January 10, 2023

Overview of industrial control panels, and what the Panel Shop Program offers

Industrial control panels (ICPs) are defined by the National Electrical Code (NEC) Section 409.2 as an assembly of two or more power circuit components, control circuit components, or any combination of power and control circuit components. These components are typically switches, terminal blocks, contactors, motor drives, transformers, overcurrent protective devices and the like.

Similar to other industrial equipment, ICPs can be evaluated as open type or enclosed. Open-type equipment is ultimately installed in an enclosure before being put into service. Enclosed ICPs can be rated for indoor use or any type rating, such as 3R, 4, or 12. In addition, these can be certified for use in classified areas, e.g., hazardous locations.

As a global provider in certifying ICPs, the Panel Shop Program offers unique flexibility for panel manufacturers, where they may label either mass-produced or custom-built ICPs without needing UL’s examination of each design. The program covers certification for U.S. and Canadian markets. Also unique to this program is the required training for panel shops that want to participate in this program.

Industrial Control Panel Shop Program

UL’s Industrial Control Panel Shop Program (ICP Program) allows control panel manufacturers who custom-build or mass-produce ICPs to apply the UL Marks for the U.S. and Canada at their factories. The ICP program makes it convenient to receive a UL certification while allowing maximum flexibility in panel design. When regulators, specifiers and end-product certifiers see the familiar UL Mark, they can be confident that the panel has met the certification requirements.

ICP Program benefits include:

  • Increase your competitive advantage — Offer your customers UL certified general use, industrial machinery, elevator control, service equipment, air conditioning and refrigeration equipment, fountain control, irrigation equipment, crane and flame control, and marine use panels and bid on jobs that specify UL certified ICPs.
  • Cover all requirements — UL’s ICP Program covers proper component usage, enclosure environmental ratings, wiring and motor protection, safety markings, and conformance to the National Electrical Code (NEC) and Canadian Electrical Code (CEC).
  • Greater efficiency — help to minimize red-tagged panels at the job site, along with the resulting delays and extra cost.
  • Widespread acceptance — Benefit from the widespread acceptance of the UL Mark by regulatory authorities in every jurisdiction in the U.S. and Canada.
  • Increased component sourcing — UL permits acceptance of specific components for use in end products, including ICPs. This provides manufacturers with even more flexibility when sourcing components used in UL certified panels in addition to UL certified components already permitted under the scope of the ICP program. More information regarding component acceptance is available within UL 508A Supplement SA Specific Component Requirements.
  • Training and workshops – UL shares their expertise through technical training and workshops focused on the needs of ICP builders. Attend one of these custom panel builder workshops and hear from their technical experts who can provide you with the knowledge and tools necessary so that you can ‘build safety in’ while meeting the requirements set by regulators and customers.

The UL 508A Industrial Control Panel Shop Program is a part of UL’s General Coverage programs, which offer control panel manufacturers flexibility to apply UL Certification Marks to a wide range of industrial control panel designs. The control panel manufacturer’s level of knowledge and quality control measures are important elements of these programs.

Control panel manufacturers initially entering the Industrial Control Panel Shop Program are required to complete mandatory training on the UL 508A industrial control panels Standard and then maintain qualified staff knowledgeable of the requirements of the Standard. Each manufacturing location must maintain at least one UL 508A qualified manufacturer technical representative (MTR) on staff who can effectively interpret and accurately apply the requirements of the UL 508A industrial control panels Standard.

Important_Links_Bar.jpg

https://www.ul.com/services/industrial-control-panels-and-panel-shop-program

Post Views: 562

Related Articles

Siemens and 80 Acres Collaborate to Scale Vertical Farming

Siemens and 80 Acres Collaborate to Scale Vertical Farming

Recently, Siemens announced its collaboration with 80 Acres Farms, a provider in the indoor farming industry. With five production farms in southwestern Ohio, a new farm in Florence, Kentucky, a future farm in Covington, Georgia, and R&D facilities in Arkansas and the Netherlands, 80 Acres Farms specializes in growing the next generation of food — food grown in eco-friendly indoor farms closer to consumers’ tables.

PB-51-RS-DesigSparkProgram-400.jpg

RS Components Launches Activist Engineering Program Urging DesignSpark Online Community to Engineer for a Better World

RS Components (RS), a trading brand of Electrocomponents plc, a global omni-channel provider of product and service solutions, has launched its DesignSpark #ActivistEngineering program, further strengthening the company’s commitment to engage and inspire design engineers across the globe to ‘make amazing happen for a better world’. The DesignSpark #ActivistEngineering program gets underway with a pilot project addressing the challenges of rising air pollution.

 

 

 

PBUS-27-Panduit-ThreeWays-400.jpg

Three Ways Colocation Providers Can Show Their Sustainability Smarts

When the pace of life slowed in 2020 as a result of COVID-19 shelter in place mandates, the environment around us we saw meaningful — and positive — change. Now there is collective desire and a growing demand to get back to business without compromising the opportunity we’ve been presented. In fact, sustainable practices are becoming a top-of-mind topic among investors, c-level executives, employees, and customers.

 

 

 

PBUS-24-Omron-LVS7510-400.jpg

How the LVS-7510 Helped a Medical Device Manufacturer Boost Labeling Speed and Accuracy

In order to comply with FDA UDI standards, all medical device manufacturers must properly format their labels and include a unique device identifier (UDI) to help end users easily identify package contents. Changing requirements can be a challenge for manufacturers in this industry, while incorrect information can lead to fines, recalls and a reduction in consumer confidence.

 

 

 

PB 25 Rockwell newlogo 400

IoT Security: Hardware Root of Trust

IoT has steadily gained popularity in recent years with more users migrating to digitalized products and smart gadgets. As an increasing amount of IoT equipment comes online, many unsecured items will be vulnerable to remote software assaults. Inadequate security gives hackers the opportunity to brick and commandeer a device to help build botnets. These malware networks introduce unauthorized code, steal data, or exploit their hosts through some other means.

 

 

 

elec calc DC, the Module for Direct Current

elec calc DC, the Module for Direct Current

The DC module “Direct current” is an additional module of elec calc. It allows the design and sizing of low voltage electrical installations in direct current, up to a voltage of 1500 VDC. Completely integrated into the elec calc software, it maintains all of its functionality and ergonomics and allows the creation of installations mixing DC and AC parts.

 

 

 

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • Kooltronic: New DSP28 3,000 BTU/H Slim-Depth Access Series High Capacity Cooling Unit

    Kooltronic: New DSP28 3,000 BTU/H Slim-Depth Access Series High Capacity Cooling Unit

    Kooltronic, Inc. of Pennington, NJ has added a new 3,000 BTU/H model to its Access Series line of slim-depth electrical enclosure air conditioners – the DSP28 AC unit. Kooltronic has expanded its Access Series line of slim-depth air conditioners with a higher-capacity model. The new 3,000 BTU/H Access Series DSP28 AC unit rounds out the… Read More…

  • Weidmuller: New Basic Line Series B Unmanaged Switches Offer Cost-Effective Alternative

    Weidmuller: New Basic Line Series B Unmanaged Switches Offer Cost-Effective Alternative

    Weidmuller USA has recenty introduced Basic Line Series B — cost-effective unmanaged switches ensuring high EMC compatibility, extended temperature ranges, and numerous certifications for a wide range of industrial applications. This new solution from Weidmuller supports Profinet CC-A and Ethernet/IP networks with features including Quality of Service (QoS), broadcast storm protection, and LLDP filtering. Designed for maximum… Read More…