| | | | | | |

STI: Tough Cover Protects Against Vandalism of LED Displays

June 2, 2022

STI has launched an enclosure that helps guard a wide range of devices against vandalism (accidental or intentional), as well as dirt, dust and grime. Vacuum formed from polyethylene terephthalate glycol (PETG) thermoplastic polyester, a food-grade and chemical-resistant material, the cover is resilient to most acids, alcohols, salts, hydrocarbons, mineral oils and petroleum.

Fast and easy to install, the cover mounts to the wall directly through the product mounting holes. The clear construction and large radius corners allow the protected device to be highly visible.

Indoor use is recommended, but the cover can be used outdoors where there is low sunlight exposure. As all STI protective covers, the LED Display Cover is backed by a three year guarantee against breakage in normal use.

 

  • Cover protects against both vandalism and accidental damage, as well as dirt, dust and grime
  • Vacuum formed from PETg, food grade and chemical resistant material
  • Resistant to most acids, alcohols, salts, hydrocarbons, mineral oils and petroleum
  • Mounts directly through product mounting holes
  • Designed for temperatures less than 140°F (60° C)
  • Indoor use recommended (can be used outside in low sunlight exposure)
  • Fast, easy installation
  • Many uses include protecting LED displays
  • Can take hard knocks in stride

 

More Information

Post Views: 1,067

Related Articles

PBUS-29-Integra-NEMA4X304StainlessSteelEnclosures-400.jpg
| | |

Integra Enclosures: 24x24x10 – 304 Stainless Steel

NEMA 4X – Ideal for indoor or outdoor applications that require protection against water, oil and dirt. Made with 304 Stainless Steel with a Grade #4 brush finish, and featuring a removeable Pin Hinge (PingeTM), Bolted Mounting Tabs and Stainless Steel 1/4 turn Latch. The seams are continuously welded and ground smooth, the door opens 180+ degrees, and there are grounding studs on the door and body.

 

 

 

PBUS-25-Renown-iAlertSensor-400.jpg
| | | |

Renown Electric: i-Alert Monitoring Solution Sensors

The health of industrial machinery may be determined by measuring the equipment’s vibration signature.  If a gear, fan, or other essential component is out of alignment or otherwise functioning incorrectly, the vibrations of the machine will change. Monitoring vibrations can help to proactively identify problems before they substantially impact operations. Vibration analysis typically happens as part of a regularly scheduled maintenance cycle with data being compared monthly, quarterly, or annually.

 

 

 

Hammond Manufacturing: ESP Series Eclipse Swing Panel
| |

Hammond Manufacturing: ESP Series Eclipse Swing Panel

Introducing the ESP Series Eclipse Swing Panel from Hammond Manufacturing, a hinged panel which allows access to internally mounted equipment and can be hinged from either side. The ESP Series panel is made of 12 gauge steel construction, and comes equipped with slotted quarter turn latches to provide closure, and can even convert into a dead front panel by adding optional locking quarter turn latches (part number EQTRL). This panel also comes complete with 4 depth adjustment brackets.

TA35/TA36: Thermal-Magnetic Circuit Breakers from SCHURTER
| | |

TA35/TA36: Thermal-Magnetic Circuit Breakers from SCHURTER

September 24, 2024 SCHURTER has a long tradition with circuit breakers. In addition to their thermal release (bimetal), the classic TA35 and TA36 are now optionally equipped with an additional magnetic module, which promises reliable protection within milliseconds in the event of very high overcurrent (short circuit). Thermal Circuit BreakersCircuit breakers are usually designed according…

I/O Expertise for Series Production: Ethercat Plug-in Modules
| | | | |

I/O Expertise for Series Production: Ethercat Plug-in Modules

The EtherCAT plug-in modules in the EJ series from Beckhoff, the specialist in PC and EtherCATbased automation solutions, offer significant efficiency gains when it comes to implementing medium to high-volume series production runs. The plug-in modules are based electronically on the established EtherCAT Terminals. Owing to their electromechanical design, these modules can be plugged directly into an application-specific signal distribution board with the wiring level being relocated to the PCB backplane.

 

 

 

PBUS-27-JAE-KN06-400.jpg
| |

Announcing JAE’s Launch of KN06 Series, Rectangular, Single-engagement, Modular Industrial Connector

JAE has launched the KN06 Series, a rectangular single-engagement lever locking modular connector. This connector series was developed primarily to be used for large-equipment, such as semiconductor-manufacturing equipment and industrial equipment requiring multi-pole wiring. Large equipment, such as semiconductor-manufacturing equipment, inspection equipment and exposure equipment, are difficult to transport as fully assembled units.

 

 

 

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • Kooltronic: New DSP28 3,000 BTU/H Slim-Depth Access Series High Capacity Cooling Unit

    Kooltronic: New DSP28 3,000 BTU/H Slim-Depth Access Series High Capacity Cooling Unit

    Kooltronic, Inc. of Pennington, NJ has added a new 3,000 BTU/H model to its Access Series line of slim-depth electrical enclosure air conditioners – the DSP28 AC unit. Kooltronic has expanded its Access Series line of slim-depth air conditioners with a higher-capacity model. The new 3,000 BTU/H Access Series DSP28 AC unit rounds out the… Read More…

  • Weidmuller: New Basic Line Series B Unmanaged Switches Offer Cost-Effective Alternative

    Weidmuller: New Basic Line Series B Unmanaged Switches Offer Cost-Effective Alternative

    Weidmuller USA has recenty introduced Basic Line Series B — cost-effective unmanaged switches ensuring high EMC compatibility, extended temperature ranges, and numerous certifications for a wide range of industrial applications. This new solution from Weidmuller supports Profinet CC-A and Ethernet/IP networks with features including Quality of Service (QoS), broadcast storm protection, and LLDP filtering. Designed for maximum… Read More…