| | | |

EdgeEnergy Features EdgeEV70 for Rapid EV Charging Stations in Electrification 2022 Booth #1522

PBUS-39-Edge-EdgeEV70Electrification2022-400.jpg

May 16, 2022

Date: June 28-30, 2022

Location: Charlotte Convention Center, Charlotte, North Carolina

EdgeEnergy will feature the EdgeEV70 single phase power source for Direct Current Fast Chargers in Electrification 2022 Booth #1522. The innovative EdgeEV70 allows for DC fast chargers to be deployed in areas without three-phase power faster and at a lower cost than infrastructure upgrades. And unlike products that are dependent on battery storage it provides on-demand, continuous charging availability 24/7. Ideal for remote areas or those without access to three-phase power, the fully self-contained, plug-n-play EdgeEV70 delivers clean, quiet power to DC fast chargers. It can be delivered in just a few weeks and installed in just a few hours. The EdgeEV70 operates from readily available single-phase utility service to produce clean, stable, isolated, three-phase output for any DC rapid charger. Power output of 480V AC, three-phase, 70 kW is ideally suited for rapid chargers up to 70 kW.  Each power source has an efficiency of 90%, is 100% electrically isolated, with 0 harmonics to comply with IEEE 519 requirements, and has a 1.0 power factor rating at full load. The power source is housed in a weather tight enclosure with an integrated temperature control system. Remote system monitoring, diagnostic, proactive maintenance is standard, allowing the EdgeEV70 to be used in remote areas where three-phase power is not available or cost-prohibitive to install. Rapid EV charging is desired in locations such as state and national parks, recreational areas, tourist locations, and more, to alleviate the range anxiety of EV owners, support local economies, and encourage EV adoption.

Since it does not rely on battery or solar panels, the EdgeEV70 delivers on-demand power to the charger with no waiting time, and no risk of depleting the battery. This continuous power improves the customer experience.

The EdgeEV70 uses patented technology to provide isolated and balanced 3-phase power in ratings to 70 kW. Built with rural applications in mind, the EV70 rides through momentary power loss and can accommodate voltage fluctuation in single-phase lines +/- 10% while delivering solid three-phase power. The EdgeEV70 supports efforts to extend charging networks into areas without 3-phase power at lower cost.

Built-in monitoring and alert systems make remote management of the EdgeEV70 easy. EdgeEnergy allows owners to customize their management dashboard to meet their specific requirements, including custom alerts and remote restart and security features.

EdgeEnergy was created with a vision for a greener and more sustainable power infrastructure. Their products use patented large horsepower single-phase motor technology to deliver isolated and balanced three-phase power in ratings to 70 kW for Level-3 rapid charging stations.

Important_Links_Bar.jpg

More Information

 

Related Articles

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE


Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More


Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.


Products for Panel Builders

  • AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect has recently added AchieVe FDM series 12mm tubular photoelectric sensors that offer a rugged metal construction, high IP67 protection ratings, and sensing distances up to 4 meters. These photoelectric sensors feature selectable light-on/dark-on operation, a 10 to 30 VDC operating voltage range, potentiometer or teach-in button sensitivity adjustment, and a fast 1kHz switching frequency. Highly… Read More…

  • METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s premium TECHNOMET-CONTROL HMI enclosures for displays, touch screens and panel PCs can now be conveniently mounted in any suitable indoor location using a new wall mounting kit (accessory). The new kit allows the enclosures to be mounted on walls, machines and other flat surfaces to suit the user’s required location for their HMI system.… Read More…