| | | | |

Cembre: Precut 4mm Push in Markers, for PMF Holders

PBUS-25-Cembre-4mmPushInMarkers-400.jpg

March 19, 2021

SerieFLAT MG-TPMF tags are used for marking cables, conduit, tubes, conductors and components. Presented in stem format, tags are simply snapped off their stems and inserted into the appropriate holders. Consult Cembre for other colours.

Note: UV resistance may vary between colours.

CEI EN 60950-1

Information technology equipment – Safety

Compliance is checked by inspection and by rubbing the marking by hand for 15 s with a piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with hexane. After this test, the marking shall be legible; it shall not be possible to remove marking plates easily and they shall show no curling.

CEI EN 61010-1

Ed.2 equivalent to VDE 0411-1

Safety indications for electric devices for measurement, control and laboratory use

This regulation requires that both material and the print shall withstand‚ cleaning with chemical agents commonly used in industry. By rubbing manually by hand, without excessive pressure, for 30 seconds with a cloth soaked in the specific detergent or, if not specified, Isopropyl Alcohol.

CEMBRE STANDARD

This test was created to simulate cleaning with chemical products commonly used on various surfaces. By wiping with a cloth soaked in 95% Ethanol 30 times and making a visual inspection after every 10 passes.

Important_Links_Bar.jpg

https://www.cembre.com/family/details/3284

 

Post Views: 509

Related Articles

PSSuniversal 2 – I/O Modules for Your Remote I/O System

PSSuniversal 2 – I/O Modules for Your Remote I/O System

A selection of I/O modules for safety-related and non-safety-related digital signal processing is available for the remote I/O system PSSuniversal 2. You can configure the system to fit your requirements, with a flexible mix of safety and standard functions. With PSSuniversal 2 it is very simple to adapt the system retrospectively. The configuration is performed in our software tool PASconfig.

 

 

 

AutomationDirect Adds VNTC Tray Cable

AutomationDirect Adds VNTC Tray Cable

VNTC (Vinyl Nylon Tray Cable) 600 Volt Type TC-ER control cables from AutomationDirect are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial and where superior electrical properties are desired. VNTC cable is available in 18 AWG to 10 AWG with 3 to 24 unshielded copper conductors. Cables are cut to length in 1-foot increments with a 20-foot minimum.

 

 

 

AutomationDirect Adds Expanded Communications and Discrete I/O Capabilities for the BRX PLC
| | | |

AutomationDirect Adds Expanded Communications and Discrete I/O Capabilities for the BRX PLC

Expansion modules snap onto the side of any BRX Micro PLC Unit (MPU) or BRX Remote I/O controller. Newly added BRX discrete I/O modules include 5, 8, and 16-point relay output modules (starting at $55) with Form A (SPST) and Form C (SPDT) options; 16-point 2-5 VDC discrete input and output modules (starting at $55); a 16-point 2-5 VDC discrete combination input/output module, etc.

 

 

 

DCS-29-Rockwell-140MTCircuitBreakers-400.jpg
| |

Rockwell Automation Releases New Bulletin 140MT Motor Protection Products

Industrial operators can realize cost savings in their applications using the new Allen-Bradley Bulletin 140MT motor protection circuit breakers and circuit protectors, which are available in sizes up to 40 amps. The new Bulletin 140MT products offer enhanced Type F combination motor controller ratings when used with Bulletin 100-C and 100-E contactors, enabling assembled starters to be applied without additional branch circuit protection.

 

 

 

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • Kooltronic: New DSP28 3,000 BTU/H Slim-Depth Access Series High Capacity Cooling Unit

    Kooltronic: New DSP28 3,000 BTU/H Slim-Depth Access Series High Capacity Cooling Unit

    Kooltronic, Inc. of Pennington, NJ has added a new 3,000 BTU/H model to its Access Series line of slim-depth electrical enclosure air conditioners – the DSP28 AC unit. Kooltronic has expanded its Access Series line of slim-depth air conditioners with a higher-capacity model. The new 3,000 BTU/H Access Series DSP28 AC unit rounds out the… Read More…

  • Weidmuller: New Basic Line Series B Unmanaged Switches Offer Cost-Effective Alternative

    Weidmuller: New Basic Line Series B Unmanaged Switches Offer Cost-Effective Alternative

    Weidmuller USA has recenty introduced Basic Line Series B — cost-effective unmanaged switches ensuring high EMC compatibility, extended temperature ranges, and numerous certifications for a wide range of industrial applications. This new solution from Weidmuller supports Profinet CC-A and Ethernet/IP networks with features including Quality of Service (QoS), broadcast storm protection, and LLDP filtering. Designed for maximum… Read More…