Finder: 7P SERIES Surge Protection Devices (SPD)

October 6, 2020

The 7P Series consists of Type 1 + 2, Type 1, Type 2 and Type 3 surge arresters. These devices include the following features (according to Type):

  •    –   Surge arrester suitable for 230 V or 400 V networks
  •    –   Single phase systems or three-phase systems
  •    –   Replaceable varistor module and encapsulated spark gap modules
  •    –   Visual and remote signalling of varistor status
  •    –   35mm rail (EN 60715) mount

 

Key Features-Benefits Bar.jpg

  •    –   Suitable for applications under vibration
  •    –   Prevents unauthorised replacement of module
  •    –   Available with or without remote signalling connector

Important Links Bar.jpg

https://www.findernet.com/en/canada/series/7p-series-surge-protection-devices-spd

Check Availability 

 

Post Views: 330

Related Articles

PBUS-36-Phoenix-CAPAROC-400.jpg
| |

Phoenix Contact: CAPAROC Data-Driven Circuit Breakers

CAPAROC, the new electronic circuit breaker system from Phoenix Contact, uses data-driven power modules to customize overcurrent protection. With numerous feed-in power modules, circuit breakers, potential distribution modules, and current rails, CAPAROC makes it easy to design an intelligent system with communication. The power feed-in module, available in status reset or PROFINET versions, is the “brain” of the system.

 

 

 

PB-45-Pilz-SecurityBridge-400.jpg
| | |

SecurityBridge Firewall From Pilz Now Also Protects Automation Networks That Include Devices From Third-Party Suppliers – Open for Manipulation-Proof Communication

With its new firmware, the SecurityBridge firewall now offers comprehensive protection for industrial automation networks. Not only does it protect the configurable safe small controllers PNOZmulti and the automation system PSS 4000, it also now enables control over data communication between any other subscribers outside of the Pilz range. The SecurityBridge was developed in line with the secure development process in accordance with the standard IEC 62443-4-1 and also respects the principle of “Zones and Conduits”.

 

 

 

PBUS-24-Eaton-ULSurgeProtectiveDevices-400.jpg
| | | | | |

Eaton: Bussmann Series UL Surge Protective Devices

Bussmann series surge protective solutions help provide power that’s free from damaging surges. Type 1 UL 1449 4th Edition Listed SPDs are easily selected and installed on the loadside or lineside of the service entrance overcurrent protective device. Voltage specific models precisely match and protect electrical systems and equipment better than a “one-size-fits-all” SPD.

 

 

 

Grace Safe-Test Point
| | | |

Grace Showcases Safe-Test Point PESD at Rockwell Automation Fair

 

Grace Engineered Products displayed its Safe-Test PointTM Permanent Electrical Safety Device (PESD) at the 2019 Rockwell Automation Fair. The Safe-Test Point high impedance protected device is designed with metered test points to allow for safe voltage measurement from outside the panel by inserting properly rated instrument probes into the device measuring phase-to-phase and phase-to-ground.

Eaton: Arc Flash Relay
| |

Eaton: Arc Flash Relay

Eaton’s Arc Flash Relay (EAFR) provides reportedly unmatched switchgear protection. This relay reduces arc flash energy by quickly clearing the current feeding the arc. The sensitive light inputs with current permissive detection identify low power phase to ground arc faults. The EAFR works to prevent faults in medium and low-voltage switchgear, and the factory-installed Arc Flash Relay modules and sensors allow for simple integration into electrical assemblies.

Phoenix Contact: CAPAROC Circuit Breaker System for Hazardous Locations
| |

Phoenix Contact: CAPAROC Circuit Breaker System for Hazardous Locations

The CAPAROC electronic circuit breaker system from Phoenix Contact now includes modules approved for use in hazardous locations. Equipment installed in potentially explosive areas must meet stringent requirements to ensure reliability and safety standards. Many existing CAPAROC parts have been tested and approved for Class I, Division 2, Groups A, B, C, and D. This makes them suitable for use in hazardous locations in North America.

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect has recently added AchieVe FDM series 12mm tubular photoelectric sensors that offer a rugged metal construction, high IP67 protection ratings, and sensing distances up to 4 meters. These photoelectric sensors feature selectable light-on/dark-on operation, a 10 to 30 VDC operating voltage range, potentiometer or teach-in button sensitivity adjustment, and a fast 1kHz switching frequency. Highly… Read More…

  • METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s premium TECHNOMET-CONTROL HMI enclosures for displays, touch screens and panel PCs can now be conveniently mounted in any suitable indoor location using a new wall mounting kit (accessory). The new kit allows the enclosures to be mounted on walls, machines and other flat surfaces to suit the user’s required location for their HMI system.… Read More…