Toshiba: Type1 Light – Standard Sequence Control Module

March 23, 2020

The Type1 Light S CPU mounts in a standard V2000 I/O rack (3 I/O, 5 I/O or 8 I/O racks are available). It can replace a S2E module. The Type1 Light S does not support racks with station bus, or I/O modules that require a station bus.

Built in communication options

The Type1 Light S CPU has both a RS485 port and an Ethernet port which supports Toshiba’s ASCII computer link protocol. This allows connection by any HMI or SCADA software that has the Toshiba computer link driver. Also ModbusTCP/IP, Modbus RTU and direct communication with Toshiba LV VFDs

Quick overview

  •  –   CPU module: PUM11
  •  –   Program capacity: 32K steps
  •  –   Number of I/O connections: Up to 32
  •  –   External I/F: Ethernet RS485 (computer link, Modbus RTU, VFD driver) USB (for connecting tool)

 

High-performance Sequence control module

The Unified Controller nv seriesTM TC-netTM I/O is built-in to the Type1 Light H CPU. It can be applied to I/O systems to provide enhanced performance. The master station, built into the CPU module, enables direct connection of the TC-netTM I/O loop. A 4 km-long remote I/O system than can be installed at low cost. The connected I/O can be selected from Integrated Controller V2000 series I/O (G2 I/O) or Unified Controller nv seriesTM TC-netTM I/O.

Remote I/O configuration

The system collects and controls remote signals in real time. The TC-netTM I/O is a high-speed, robust I/O system for communication by optical cable with strong resistance to electrical noise.

Quick overview

  •  –   CPU module: PUM12
  •  –   Program capacity: 64K steps
  •  –   TC-netTM I/O Loop: 1 loop
  •  –   Number of TC-netTM I/O connections: up to 64
  •  –   External I/F: Ethernet
  •  –   USB (for connecting tools)
 

Type1 Light D – PUM14 CPU

Redundant sequence control module

The Type1 Light D CPU supports redundancy. Redundancy enables greater productivity by providing the highest system availability. With a program capacity of 128K steps and the ability to connect up to 192 I/O modules, the Type1 Light D is ideal for critical medium and large-scale systems. The module can also be used in a single module configuration.

High performance and critical system reliability

Automatic switching to the secondary CPU occurs if a problem is detected in the primary CPU.

Quick overview

  •  –   CPU module: PUM14
  •  –   Program capacity: 128K steps
  •  –   TC-netTM I/O Loop: 1 loop
  •  –   Number of TC-netTM I/O connections: up to 192
  •  –   External I/F: Ethernet, USB (for connecting tools)

Important Links Bar.jpg

https://www.toshiba.com/tic/other-products/plcs/type1-light

 

Post Views: 481

Related Articles

Bosch Rexroth Sets New Standards for Safe Automation with ctrlX SAFETY
|

Bosch Rexroth Sets New Standards for Safe Automation with ctrlX SAFETY

With ctrlX SAFETY, Bosch Rexroth introduces a novelty to the automation market: the most responsive and compact safety solution of its kind. The scalable system can be used as required – from the drive-integrated SafeMotion solution in ctrlX DRIVE to the complete ctrlX SAFETY control. In addition to the flexible use, the advantages include a very high level of safety thanks to the fastest reaction times and efficient engineering through graphical programming of the safety PLC.

 

 

 

BRX PLCs Are Do-More Driven: 10 Ways It’s Better With BRX PLCs
| | | |

BRX PLCs Are Do-More Driven: 10 Ways It’s Better With BRX PLCs

What would you expect to pay for a PLC with built-in data logging, integrated motion control, customizable communications ports, and expansion capabilities? If you said a few thousand, then you are definitely in the right place. If you said a few hundred, then you’ve been here before! The BRX PLC platform, with the proven Do-more! DM1 technology, raises the bar on getting the most out of your PLC dollar.

 

 

 

Beckhoff: EL336x | EL336x-0100 Optimized Weighing Technology
| | | | |

Beckhoff: EL336x | EL336x-0100 Optimized Weighing Technology

The new EL336x and EL336x-0100 series of weighing technology terminals can be used to directly connect resistance bridges (strain gages) or load cells. 24-bit resolution, a 10-ksps sampling rate, and full bridge support enable precise recording of weight, strain, or torque. Integrated voltage generation from the terminal power contacts is used to supply the bridge directly and can be varied between 5 V and 10 V. The basic EL336x variant of the two terminals also has a combined digital input/output for each channel, which can be used for other functions such as local control of the output directly dependent on the analog value at the input.

WEG Fully Digital Soft Starters and Micro VFD Drives from AutomationDirect

WEG Fully Digital Soft Starters and Micro VFD Drives from AutomationDirect

New compact soft starters and micro VFD drives have been added to the AutomationDirect motor controls lineup which encompasses simple manual controllers, motor contactors and starters, drives and soft starters. WEG SSW05 and SSW07 soft starters are compact, fully digital soft starters with state-of-the-art DSP (Digital Signal Processor) controller designed to provide great performance on motor starts and stops.

 

 

 

Yaskawa America, Inc. Introduces Innovative Microdrive

Yaskawa America, Inc. Introduces Innovative Microdrive

The Drives & Motion division of Yaskawa America, Inc. proudly introduces the GA500 Industrial Microdrive, reflecting Yaskawa’s continued customer commitment to providing sustainable, flexible, and easy-to-use products. “This drive builds on the deep history of Yaskawa’s product quality,” Ed Tom, Product Manager, said. “The GA500 provides high reliability with its design to deliver a minimum of 10 years of continuous operation.”

 

 

 

IMO: SD1 & HD2 Dual Rated AC Variable Speed Inverter Drives
| |

IMO: SD1 & HD2 Dual Rated AC Variable Speed Inverter Drives

IMO has released a pair of dual rated AC variable speed inverter drives, the SD1 and HD2 series. The SD1 range is the ultimate variable speed drive for you. Easy to set up, and comprehensively specified for use in virtually any application, the SD1 is IMO’s first complete range of variable speed drives which offer STO (SIL2 / SIL3) dependent upon model. The HD2 range of inverters offer unrivalled performance. Designed for controlling asynchronous AC induction motors and permanent magnet synchronous motors, the HD2 torque vector control range are packed full of features as standard that you would usually expect to find on considerably higher specified inverters.

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • Kooltronic: New DSP28 3,000 BTU/H Slim-Depth Access Series High Capacity Cooling Unit

    Kooltronic: New DSP28 3,000 BTU/H Slim-Depth Access Series High Capacity Cooling Unit

    Kooltronic, Inc. of Pennington, NJ has added a new 3,000 BTU/H model to its Access Series line of slim-depth electrical enclosure air conditioners – the DSP28 AC unit. Kooltronic has expanded its Access Series line of slim-depth air conditioners with a higher-capacity model. The new 3,000 BTU/H Access Series DSP28 AC unit rounds out the… Read More…

  • Weidmuller: New Basic Line Series B Unmanaged Switches Offer Cost-Effective Alternative

    Weidmuller: New Basic Line Series B Unmanaged Switches Offer Cost-Effective Alternative

    Weidmuller USA has recenty introduced Basic Line Series B — cost-effective unmanaged switches ensuring high EMC compatibility, extended temperature ranges, and numerous certifications for a wide range of industrial applications. This new solution from Weidmuller supports Profinet CC-A and Ethernet/IP networks with features including Quality of Service (QoS), broadcast storm protection, and LLDP filtering. Designed for maximum… Read More…