| |

CONTA-CLIP Direct Modbus Connection to PLCs

Conta-Clip GSM-Pro2

 

November 18, 2019

Conta-Clip GSM-Pro2 Direct Modbus Connection to PLCs

CONTA-CLIP’s GSM-PRO2 Series provides a 2G/3G and 4G remote control and maintenance solution that allows users to monitor and control decentralized facilities. Now featuring a built-in Modbus RTU interface, the GSM-PRO2 can be connected as a slave to other controllers (such as a PLC). As a result, the GSM-PRO2 can be used to conveniently expand a PLC system with additional GSM functionality. By using predefined registers, the PLC can send an SMS or e-mail using the GSM-PRO2 as a messenger. The PLC can also be controlled using the GSM-PRO2. The module can set predefined registers to influence the PLC process (analogue or digital). 

The GSM-PRO-CON extension module makes wiring even simpler. Plugged into the GSM-PRO2 module, it offers front-access terminals for connection to the controller. The GSM-PRO2 parameterization software can be programmed to send a text or email fault message to specified recipients when the status of the PLC input changes. Prompted by a text message that is sent to the GSM-PRO2 module, data is written into the PLC’s digital and analog registers via the Modbus RTU interface. The PLC, acting as a master, reads out the data in order to trigger the corresponding actions. Various communication modules with and without GPS functionality are available for all common wireless standards up to 4G.

Apps for iPhone and Android devices enable flexible monitoring and control and provide an instant overview over the statuses of several modules at once. Users do not need any programming skills to parameterize the modules. Firmware updates and online configuration changes can be easily carried out at any time via the GSM network, even after installing and commissioning the modules.

 

  • Can provide a PLC with added GSM functionality via plug connection
  • Programmed to send a text or email fault messages when the status of the PLC input changes
  • Firmware updates and online configuration changes can be carried out at any time via the GSM network
  • Simplifies wiring

More information on the GSM-Pro2 

GSM-Pro2 Product Guide 

Post Views: 567

Related Articles

Why the V275 Series is the Ideal Label Inspection Solution for Manufacturers Using Zebra Thermal Printers
| | | | | |

Why the V275 Series is the Ideal Label Inspection Solution for Manufacturers Using Zebra Thermal Printers

In industries like life sciences, food and beverage, automotive and consumer packaged goods, it’s imperative for companies to ensure that product and packaging labels show the correct content, are clearly legible, and meet mandated quality requirements. Otherwise, these companies could be liable for consumer safety issues and could be subject to costly recalls.

 

 

 

AutomationDirect: Patlite NE Series Visual and Audible-Visual Signaling Beacons
| |

AutomationDirect: Patlite NE Series Visual and Audible-Visual Signaling Beacons

AutomationDirect has added Patlite NE series visual and audible-visual signaling beacons to their portfolio of industrial signaling devices. These signaling devices are offered as visual-only beacons or as combination devices with a buzzer or selectable tone alarm (8 different tones) and signal beacon. Mono-color beacons are available in red, yellow, green, blue, or clear models. Multi-color versions support 7 selectable colors allowing users to signal numerous different equipment conditions with one device.

Banner Engineering: S15L Pro Discrete In-Line Indicator – Configurable, Easy-to-See Status Indication Controlled via Discrete I/O
| |

Banner Engineering: S15L Pro Discrete In-Line Indicator – Configurable, Easy-to-See Status Indication Controlled via Discrete I/O

The S15L Pro series of in-line indicators provides clear visibility of connected device status through distinct, multicolor indication. Colors and animations can now be configured using Banner’s free Pro Editor software and then controlled through simple discrete inputs. Quickly and easily install directly to a compatible sensor or anywhere in-line with cascadable M12 connectors.

Schneider Electric: Modicon M251 TM251MESC Logic Controller
| | | | | |

Schneider Electric: Modicon M251 TM251MESC Logic Controller

This product is part of the Modicon M251 range, an offer of logic controllers for modular and distributed architectures. This logic controller provides 7 local, 14 remote I/O expansion modules. It is a Modicon logic controller with a rated supply voltage of 24V DC, an inrush current of 50A and a power consumption of 32.6W to 40.4W. Boost the performance of machine with powerful data transfer via SD Card, embedded web and FTP server and more.

Red Lion: RA50C Compact Remote Access Routers
| | |

Red Lion: RA50C Compact Remote Access Routers

The RA50C is a compact din-rail mountable industrial router for remote access. It offers secure IP-based access to Ethernet devices and networks through the RLConnect24 portal. The RA50C compact remote access router enables secure IP-based access to remote networks and equipment through on-board Ethernet, 4G LTE cellular (AT&T), or Wi-Fi communication. With an integrated Ethernet switch, it is easy to connect local IP-based assets.

 

 

 

TE Connectivity P-Clamp
| | | | | |

TE Connectivity P-Clamp Simplifies Cable Harnesses

TE Connectivity (TE) P-Clamp provides a light, fast, and efficient solution to mounting cable harnesses. (10) TE P-Clamp sizes cover the full cable diameter range of (21) AS21919 P-Clamp sizes. Faster install times and lighter weight, give TE P-Clamps a lower applied cost than standard AS21919 P-Clamps.

Network Infrastructure Featured Product Spotlight

PBUS 14 Panduit logo 400

This webinar presented by Beth Lessard and Keith Cordero will be highlighting three Panduit solutions that will optimize network equipment and cabling to ensure that your spaces are efficiently and properly managed to support ever-evolving business needs of today and beyond. Products that will be featured include PanZone TrueEdge Wall Mount Enclsoure, Cable Managers, and Adjustable Depth 4-Post Rack.

REGISTER HERE

Editor’s Pick: Featured Product News

Siemens: SIMOVAC Non-Arc-Resistant and SIMOVAC-AR Arc-Resistant Motor Controllers

The Siemens SIMOVAC medium-voltage non-arc-resistant and SIMOVAC-AR arc-resistant controllers have a modular design incorporating up to two 12SVC400 (400 A) controllers, housed in a freestanding sheet steel enclosure. Each controller is UL 347 class E2, equipped with three current-limiting fuses, a non-load-break isolating switch, and a fixed-mounted vacuum contactor (plug-in type optional for 12SVC400). The enclosure is designed for front access, allowing the equipment to be located with the rear of the equipment close to a non-combustible wall.

Read More

Sponsored Content
Electrify Your Enterprise

Power is vital to production, and well-designed control cabinets are key. Allied Electronics & Automation offers a comprehensive collection of control cabinet solutions including PLCs, HMIs, contactors, miniature circuit breakers, terminal block connectors, DIN-rail power supplies, pushbutton switches, motor starters, overloads, power relays, industrial Ethernet switches and AC drives engineered to keep your operations running safely, reliably and efficiently.

Learn more HERE.

Products for Panel Builders

  • AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect: AchieVe FDM Series 12mm Tubular Photoelectric Sensors

    AutomationDirect has recently added AchieVe FDM series 12mm tubular photoelectric sensors that offer a rugged metal construction, high IP67 protection ratings, and sensing distances up to 4 meters. These photoelectric sensors feature selectable light-on/dark-on operation, a 10 to 30 VDC operating voltage range, potentiometer or teach-in button sensitivity adjustment, and a fast 1kHz switching frequency. Highly… Read More…

  • METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s TECHNOMET-CONTROL HMI Enclosures Now Offer Seamless Wall Mounting

    METCASE’s premium TECHNOMET-CONTROL HMI enclosures for displays, touch screens and panel PCs can now be conveniently mounted in any suitable indoor location using a new wall mounting kit (accessory). The new kit allows the enclosures to be mounted on walls, machines and other flat surfaces to suit the user’s required location for their HMI system.… Read More…